summaryrefslogtreecommitdiff
path: root/target/linux/generic
AgeCommit message (Collapse)Author
2013-09-15kernel: b53: detect revision of BCM5325hauke
The revision is stored in a different register than it is in other Broadcom switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel: b53: fix vlan write for BCM5325 revison 3+hauke
These switches are integrated in some recent BCM53XX and BCM47XX SoCs like the BCM53572. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: remove unused defines from the rootfs split patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: reduce number of ifdefs in the rootfs split codejuhosg
Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: rename mtd patchesjuhosg
- change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: update bcma and ssb to wireless-testing master-2013-09-09hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: add support for ESMT F25L32PA with upstream submissionluka
Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: align the skb padding to power of twonbd
The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: fix broken depends syntax introduced in r37933florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: Fix FIQ code on VIVT CPUs (#14145)florian
Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: allow hwmon GSC driver for all targetsluka
- enable using hwmon GSC driver on all targets - add a kmod package for it Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: fix arch-dependent bug in hso modulenbd
Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: b53: support phy ids for BCM5365jogo
BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05Add missing symbolkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02generic: remove linux version checks from myloader.cjuhosg
The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28kernel: fix booting issues on imx23 and imx6 targetsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: don't hide the 'Warning: unable to open an initial console' messagejuhosg
The 'Warning: unable to open an initial console' message indicates an error in the rootfs. Remove the patch which hides the warning. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: ensure that /dev/console exists in initramfsjuhosg
Linux expects that the /dev/console node is present in the rootfs image. Create the node in initramfs, in order to make std{in,out,err} usable even in early init process. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-26kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9nbd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel: update 3.10 to 3.10.9juhosg
Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23generic: refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel/3.10: backport of_pci_get_devfn function from 3.11juhosg
Fixes the following build error on ramips/rt3883: arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \ 'of_pci_get_devfn' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Although the function is only used by the PCI driver of the RT3883 SoC but at the moment but it might be useful for other targets as well. Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-21kernel: crashlog: Avoid out-of-bounds writenbd
vsnprintf returns the number of chars that would have been written, not the actual number of chars written. This can lead to crashlog_buf->len being too big which in turn can lead to get_maxlen() returning negative numbers. The length argument of kmsg_dump_get_buffer will be casted to a size_t which makes a negative input a big positive number allowing kmsg_dump_get_buffer to write out of bounds. Fix this by using vscnprintf which returns the actually written number of chars. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: add back missing declaration in the MIPS DMA patch that broke octeonnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: drop dead pwm codeluka
The files have last been used with 2.6.x kernel. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: drop dead glamo codeluka
The code is not used since the s3c24xx target was removed. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: replace local m25p80 patches with upstream submissionluka
http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html http://patchwork.ozlabs.org/patch/268019/ Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patchluka
The patch in question has been accepted upstream in commit: 55bf75b7dd8ec875d048824f3cdecf8254e292e5 Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: drop 110-fix_mtd_include.patchluka
Kernel builds just fine without this patch so we can just remove it. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15kernel: fix a small #ifdef bug in the noncoherent dma check reworknbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15kernel: improve dma ops inlining patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel ↵nbd
recognize modules as GPL-compatible Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12kernel: add patch to inline mips dma mapping functions - reduces code size ↵nbd
and improves performance Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12rtl8367: add support for configuring the VLAN FIDnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05kernel: add some missing config symbolsflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05kernel: fix DMA error when BCM4331 is connected to BCM4706hauke
The BCM4331 supports a PCIe max request size of 512 bytes and uses that, but the PCIe controller in the BCM4706 just supports 128 Bytes and that causes a DMA error for packages bigger than 126 bytes. This fixes the problem by setting the BCM4331 also to 128 Bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04generic: make the module reloc pacth work on mips64blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing config optionhauke
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: ocf: add missing kernel dependenciesjogo
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher, so let it select these through kernel config. Fixes the following build error: ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: b53: use devm_gpio_request_one() to request gpiohauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: b53: add support for GPIO resethauke
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: add missing iio config symbols for 3.10wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-29kernel: update to linux 3.10.4, refresh patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37617 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 07:48:39 +0000