summaryrefslogtreecommitdiff
path: root/target/linux/generic
AgeCommit message (Collapse)Author
2013-12-06generic: workaround arptables arpt_arp structure padding issue (#14577)jow
Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on at least the ar71xx target, resulting in a two bytes shorter struct in the kernel compared to what arptables userspace expects. When comparing sizeof(struct arpt_arp) in kernel and userspace, the former yields 162 byte, while the latter is 164 byte. As a consequence, the subsequent target_offset and next_offset members of the parent arpt_entry structure contain invalid values when processed by the arptables binary, leading to bad memory accesses in the populate_cache() procedure, subsequently causing a segfault. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-06generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel ↵jow
header install phase (#12907) Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01kernel: update 3.10 to 3.10.21juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30kernel: refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29generic: ar8216: add AR8337N switch supportjuhosg
This patch is needed to use the switch inside the Sitecom WLR-8100; it was unusable and detected as Generic-Phy before. since ar8337 is behaving like ar8327 generally do the same thing see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218 forward-ported to trunk Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4469/ [juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29generic: ar8216: remove trailing whitespacesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-27[generic/3.12]: refresh patchkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-27[generic/3.12]: make the wl12xx glue code available with compat-wireless, tookaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-27[generic/3.12]: add TI wireless symbols and enable the platform glue by defaultkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: backport get_cycles() fixhauke
get_cycles() is used in some places as one part of the seed for the kernel PRNG. This backports the following commit from mainline linux kernel: 9c9b415c50bc298ac61412dff856eae2f54889ee Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: add fix to block2mtd driver for modified error loggingwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: add missing symbols for 3.12wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16kernel: add missing symbols for 3.12wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14kernel: backport an upstream fix to improve TCP performance for wifi driversnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bgmac: make it send and receive some packages on BCM4708hauke
This adds some more code for bgmac core rev 4 and it now restarts all cores when initializing the first one on BCM4708. I am just able to send under 100 packages and then DMA TX does not work any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bcma: detect pci ID 0x4313hauke
This pci ID is used by sprom less BCM4313 devices. This is a backport from the mainline kernel. This is part of #13551. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07kernel/3.10: add EOF marker support to the UBI layerjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06kernel: add some config optionsluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05[generic/3.12]: update for 3.12 finalkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05kernel: update 3.10 to 3.10.18juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04kernel/3.1[02]: move MTD root device setup code to mtdcorejuhosg
The current code only allows to automatically set root device on MTD partitions. Move the code to MTD core to allow to use it with all MTD devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04kernel: refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-03kernel: add some config optionshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-03kernel: bgmac: update backport patchhauke
This adds some more bgmac patches from mainline kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-01kernel: add missing config optionshauke
The buildbots found some new missing config options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30kernel: add some missing config optionshauke
This was spotted by the buildbots. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30generic: mtdsplit_uimage: add uImage magic for the WRN2200 boardjuhosg
Should fix boot failure on the WNR2200 boards. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-29kernel: refresh 3.12 patches on -rc7 releaseluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-28kernel: add missing config optinonshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-28kernel: jffs2: ignore bad blocks after the end-of-filesystem markernbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-27kernel: fix compile error in 3.12luka
Upstream commit c655bc6896b94ee0223393f26155c6daf1e2d148 changed number of arguments in nf_ct_iterate_cleanup() function. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-27kernel: add missing 3.12 config symbolsluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-25kernel: handle Cavium Octeon Kconfig renameflorian
Upstream commit 9ddebc46 ("MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC") renamed a Kconfig symbol, thus making all MIPS builds ask for this specific Kconfig symbol, add it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-25kernel: add some missing 3.12 config symbolsflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-24[generic:] preliminary 3.12 supportkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-24kernel: make swconfig checkpath compliantflorian
Fix the warnings and errors reported by checkpatch on swconfig.c Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-23kernel: update 3.10 to 3.10.17juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-22kernel/3.10: add missing config symboljuhosg
Based on 'kernel: update x86 generic to 3.10.13' patch from http://patchwork.openwrt.org/patch/4129/ Signed-off-by: Ulrich Weber <uw@xyne.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-13kernel: update kernel to 3.10.15hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-12mvswitch: fix compilation for linux 3.10jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-10kernel: add default config for ARM_ERRATA symbols for kernel 3.3hauke
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06kernel: b53: add switch name into printk when it fails.hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: fix BCM4707 patchhauke
The bool logic was the wrong way around. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: refresh patcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bcma: update to wireless-testing master-2013-10-01hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: move other bgmac patches to generichauke
The bgmac driver will be used on the brcm47xx and the bcm53xx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: move bgmac patches already applied in mainline kernel to generichauke
The bgmac driver will be used on the brcm47xx and the bcm53xx target. These are only the patches already applied in current net-next/master branch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38288 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-25 05:53:08 +0000