summaryrefslogtreecommitdiff
path: root/target/linux/generic
AgeCommit message (Collapse)Author
2013-03-03kernel: update linux 3.8 to 3.8.1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03linux/3.8: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03kernel: update linux 3.7 to 3.7.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21linux/3.8: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLANjogo
Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21generic: b53: remove empty spacesjogo
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19linux/3.8: add missing Kconfig symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19kernel: update linux 3.8-rcX to 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17generic: ar8216: cleanup function/variable namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17generic: ar8216: rename struct ar8216_priv to ar8xxx_privjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16brcm47xx: add initial support for kernel 3.8hauke
This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16kernel: add missing config optionsjogo
r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to not build with PTP enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-15kernel: update linux 3.7 to 3.7.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-14generic: ar8216: move PHY4 RGMII workaround code out of the loopjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-14generic: ar8216: register the switch from the probe routinejuhosg
Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-12kernel: update linux 3.7 to 3.7.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11ar8216: remove superfluous code from ar8216_config_initjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11generic: ar8216: don't use ethernet device name in register_switchjuhosg
The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11generic: ar8216: reuse the private data from ar8216_probejuhosg
The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11generic: ar8216: use phydev instead of pdev everywherejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11generic: ar8216: use pr_* macros for kernel messagesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-11generic: ar8216: fix PHY features setupjuhosg
Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: add ar8xxx_probe_switch helperjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stopjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: free mib counters from ar8xxx_freejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: add ar8xxx_free helperjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: add ar8xxx_create{,mii} helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: remove redundant phy address checkjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: only set phy_ptr if packet mangling is usedjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: add defines for the AR8316 POSTRIP registerjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: don't probe the chip multiple timesjuhosg
It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: add sanity check to ar8216_probejuhosg
Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: ar8216: skip probe on unused PHY addressesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-10generic: b53: fix reverted error check in probejogo
b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-09generic: ar8216: move sleep out of the loopjuhosg
It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-08generic: ar8216: simplify phy features setupjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-08generic: ar8216: don't use mdio bus specific functions in ar8216_id_chipjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-07generic: ar8216: use inline function to convert swdev to ar8216juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-07generic: ar8216: add mii_bus field to struct ar8216_privjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-07generic: mvswitch: add detach callbackjuhosg
Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-07generic: ar8216: add detach callbackjuhosg
The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-07generic: add detach callback to struct phy_driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-05generic: ar8216: clear driver specific data pointer in phy_devicejuhosg
This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-05generic: ar8216: unregister switch on error pathjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-04kernel: generic: update the ehci overcurrent patch to upstream submissionjogo
Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-04kernel: generic: add back the patch exporting bcm63xx tag headerjogo
It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-04kernel: generic: update to 3.8-rc6jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-04kernel: update linux 3.7 to 3.7.6juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02generic: convert crypto-ocf from kernel_thread to kthreadjuhosg
recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02linux/3.7: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35450 3c298f89-4303-0410-b956-a3cf2f4a3e73