summaryrefslogtreecommitdiff
path: root/target/linux/generic/patches-3.10
AgeCommit message (Collapse)Author
2013-10-13kernel: update kernel to 3.10.15hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-12mvswitch: fix compilation for linux 3.10jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: fix BCM4707 patchhauke
The bool logic was the wrong way around. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bcma: update to wireless-testing master-2013-10-01hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: move other bgmac patches to generichauke
The bgmac driver will be used on the brcm47xx and the bcm53xx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02kernel: bgmac: move bgmac patches already applied in mainline kernel to generichauke
The bgmac driver will be used on the brcm47xx and the bcm53xx target. These are only the patches already applied in current net-next/master branch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-27kernel: update 3.10 to 3.10.13juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-26kernel/3.10: use backported patch for PMC SPI flash supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-26kernel/3.10: add '003-11-' prefix for patches backported from 3.11juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25kernel/3.10: add upstream commit id to the backported hso patchesjuhosg
Also remove the internal patch numbers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25kernel/3.10: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add partition parser for Seama firmwaresjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add partition parser for uImage firmwaresjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add separate rootfs partition parserjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: move squashfs check from rootfs split code into a separate filejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: allow to use partition parsers for rootfs and firmware splitjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: allow to use different MTD parser typesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-17kernel: backport a fix for multiqueue selection to prevent tcp reordering ↵nbd
with fair queueing Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16kernel: add generic GPIO watchdog driverhauke
This is used on Huawei E970 (brcm47xx). Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel/3.10: add new Kconfig option for firmware partition splitjuhosg
Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel: update 3.10 to 3.10.12juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel/3.10: move OpenWrt MTD options into a submenujuhosg
Separate OpenWrt specific MTD options from the mainline option by moving those into a new submenu in the kernel configuration interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: remove unused defines from the rootfs split patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: reduce number of ifdefs in the rootfs split codejuhosg
Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: rename mtd patchesjuhosg
- change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: update bcma and ssb to wireless-testing master-2013-09-09hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: add support for ESMT F25L32PA with upstream submissionluka
Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: align the skb padding to power of twonbd
The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: Fix FIQ code on VIVT CPUs (#14145)florian
Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: allow hwmon GSC driver for all targetsluka
- enable using hwmon GSC driver on all targets - add a kmod package for it Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: fix arch-dependent bug in hso modulenbd
Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28kernel: fix booting issues on imx23 and imx6 targetsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: don't hide the 'Warning: unable to open an initial console' messagejuhosg
The 'Warning: unable to open an initial console' message indicates an error in the rootfs. Remove the patch which hides the warning. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: ensure that /dev/console exists in initramfsjuhosg
Linux expects that the /dev/console node is present in the rootfs image. Create the node in initramfs, in order to make std{in,out,err} usable even in early init process. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel: update 3.10 to 3.10.9juhosg
Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel/3.10: backport of_pci_get_devfn function from 3.11juhosg
Fixes the following build error on ramips/rt3883: arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \ 'of_pci_get_devfn' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Although the function is only used by the PCI driver of the RT3883 SoC but at the moment but it might be useful for other targets as well. Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-21kernel: crashlog: Avoid out-of-bounds writenbd
vsnprintf returns the number of chars that would have been written, not the actual number of chars written. This can lead to crashlog_buf->len being too big which in turn can lead to get_maxlen() returning negative numbers. The length argument of kmsg_dump_get_buffer will be casted to a size_t which makes a negative input a big positive number allowing kmsg_dump_get_buffer to write out of bounds. Fix this by using vscnprintf which returns the actually written number of chars. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: add back missing declaration in the MIPS DMA patch that broke octeonnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: drop dead glamo codeluka
The code is not used since the s3c24xx target was removed. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: replace local m25p80 patches with upstream submissionluka
http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html http://patchwork.ozlabs.org/patch/268019/ Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patchluka
The patch in question has been accepted upstream in commit: 55bf75b7dd8ec875d048824f3cdecf8254e292e5 Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17kernel: drop 110-fix_mtd_include.patchluka
Kernel builds just fine without this patch so we can just remove it. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15kernel: fix a small #ifdef bug in the noncoherent dma check reworknbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15kernel: improve dma ops inlining patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12kernel: add patch to inline mips dma mapping functions - reduces code size ↵nbd
and improves performance Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05kernel: fix DMA error when BCM4331 is connected to BCM4706hauke
The BCM4331 supports a PCIe max request size of 512 bytes and uses that, but the PCIe controller in the BCM4706 just supports 128 Bytes and that causes a DMA error for packages bigger than 126 bytes. This fixes the problem by setting the BCM4331 also to 128 Bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04generic: make the module reloc pacth work on mips64blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-29kernel: update to linux 3.10.4, refresh patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37617 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 22:18:19 +0000