summaryrefslogtreecommitdiff
path: root/target/linux/generic/files
AgeCommit message (Collapse)Author
2013-12-15generic: ar8216: Enable jumbo frames on AR8327 by defaultjuhosg
This patch enables jumbo frames on AR8327 switch by default. I have tested it on TP-Link TL-WDR3600. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-08ath9k: merge initval and tx gain table updates, calibration fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29generic: ar8216: add AR8337N switch supportjuhosg
This patch is needed to use the switch inside the Sitecom WLR-8100; it was unusable and detected as Generic-Phy before. since ar8337 is behaving like ar8327 generally do the same thing see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218 forward-ported to trunk Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4469/ [juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29generic: ar8216: remove trailing whitespacesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30generic: mtdsplit_uimage: add uImage magic for the WRN2200 boardjuhosg
Should fix boot failure on the WNR2200 boards. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-24kernel: make swconfig checkpath compliantflorian
Fix the warnings and errors reported by checkpatch on swconfig.c Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06kernel: b53: add switch name into printk when it fails.hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25kernel: b53: add Register Access Bridge Registers (SRAB) interfacehauke
The SRAB interface is used on BCM4707 and BCM5301X SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25kernel: create firmware partition from MyLoader partition parserjuhosg
This is in preparation for sysupgrade support for Compex devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add partition parser for Seama firmwaresjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add partition parser for uImage firmwaresjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add default partition name defines to mtdsplit.hjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add more helpers to the mtdsplit codejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: add separate rootfs partition parserjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21kernel/3.10: move squashfs check from rootfs split code into a separate filejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel: b53: detect revision of BCM5325hauke
The revision is stored in a different register than it is in other Broadcom switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel: b53: fix vlan write for BCM5325 revison 3+hauke
These switches are integrated in some recent BCM53XX and BCM47XX SoCs like the BCM53572. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: b53: support phy ids for BCM5365jogo
BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02generic: remove linux version checks from myloader.cjuhosg
The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: drop dead pwm codeluka
The files have last been used with 2.6.x kernel. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18kernel: drop dead glamo codeluka
The code is not used since the s3c24xx target was removed. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel ↵nbd
recognize modules as GPL-compatible Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12rtl8367: add support for configuring the VLAN FIDnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: ocf: add missing kernel dependenciesjogo
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher, so let it select these through kernel config. Fixes the following build error: ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: b53: use devm_gpio_request_one() to request gpiohauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: b53: add support for GPIO resethauke
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27strict_strtoul is obsolete, use kstrtoul insteadblogic
based on http://patchwork.openwrt.org/patch/3827/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-21kernel: Remove gpio-pwm patcheslars
There is no platform using the gpio-pwm driver, yet these patches break the generic PWM framework that is in upstream. So just remove them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-19kernel: remove gpio_buttonsjogo
It hasn't been buildable for a long time, and there are no users of it anymore left as all of them have been switched to the upstream accepted version. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14brcm47xx: use b53 phy driver for the switch in kernel 3.10hauke
This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04generic: add port mirroring/monitoring capability to rtl8366rb switchjuhosg
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the TL-WR1043ND router that allow to mirror ethernet packets to a monitor port. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30generic: ar8216: allow to specify SGMII config via platform datajuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30generic: ar8216: add get_port_link callbackjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30generic: ar8216: show chip revision in the kernel logjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-24generic: ar8216: add port mirroringluka
Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both RX and TX traffic from LAN port 1 to LAN port 4: $ swconfig dev switch0 set enable_mirror_rx 1 $ swconfig dev switch0 set enable_mirror_tx 1 $ swconfig dev switch0 set mirror_monitor_port 4 $ swconfig dev switch0 set mirror_source_port 1 Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Tested-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-13kernel: add missing PHY ID for an AR8327 switch variantnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09kernel: b53: use correct oops for bcm5365 switchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: add missing bcma defines and header file for bcrmfmacjogo
Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25generic: fix rtl8366_smi compile warningblogic
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12[geneirc] fix rtl8366s OF bindingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] unbreak portmapping - typo fixblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[swconfig] allow loading port maps from OFblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06generic: rtl8367: add compatible string with vendor prefixjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06generic: rtl8367b: fix rtl8367b_extif_init_ofjuhosg
* disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36229 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 05:38:54 +0000