summaryrefslogtreecommitdiff
path: root/target/linux/generic/files
AgeCommit message (Expand)Author
2011-12-14ath9k: add support for registering extra leds connected to the wmac gpio linesnbd
2011-12-13kernel: move linux/ath9k_platform.h to generic files so that it can be reused...nbd
2011-11-12kernel: ar8216: add support for the AR8236 switchjuhosg
2011-11-12kernel: ar8216: move port vlan setup into a separate functionjuhosg
2011-11-04kernel: swconfig: add a missing unlock in error pathjuhosg
2011-10-11ar8216: use mdiobus_{read,write} to ensure proper lockingjogo
2011-09-21generic: jumbo frames support for rtl8366sjuhosg
2011-08-15generic: ar8216: add support for get link statusjuhosg
2011-07-27swconfig: Add generic switch identifiersjogo
2011-07-24rtl8366_smi: implement a function for detecting whether the attached switch i...nbd
2011-07-24rtl8366: unify rtl8366s and rtl8366rb platform datanbd
2011-07-24ocf-linux: version bump to 20110720hauke
2011-07-03generic: add rt2x00_platform.hjuhosg
2011-07-01fix the gpio_dev driver: remove existing forward port patches, use unlocked_i...nbd
2011-06-09[ledtrig-netdev]blogic
2011-05-09[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FCblogic
2011-04-28ar8316: automatically detect whether port4 is used as PHY or as a switch portnbd
2011-04-28ar8216: support AR8316 rev 0 devicesnbd
2011-04-26swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCKnbd
2011-04-12generic: rtl8366{s,rb}: remove the PHY driver.juhosg
2011-04-02rtl8306: do not overwrite registers in the phy fixup, it could mess up other ...nbd
2011-04-02kernel: the cryptosoft module of ocf needs cryptoapi manager support (for blk...nbd
2011-03-19kernel: linux/version.h was removed in kernel 2.6.19 and is now replaced by g...hauke
2011-01-26generic: rtl8366s: allow initial register values to be passed via platform_datajuhosg
2011-01-09generic: rtl8366: fix build errorjuhosg
2011-01-08generic: rtl8366: enable vlans before enabling the portsjuhosg
2011-01-08generic: rtl8366: enable ports only after VLAN configuration is donejuhosg
2011-01-08generic: rtl8366: add enable_port helperjuhosg
2011-01-08generic: rtl8366_smi: init VLANs only in first switch initializationjuhosg
2011-01-08generic: rtl8366s: use correct bitmasks in sanity checksjuhosg
2011-01-08generic: rtl8366s: add vlan fid supportjuhosg
2011-01-08generic: rtl8366: add debugfs file for VLAN4K tablejuhosg
2011-01-08generic: rtl8366rb: use correct bitmasks in sanity checksjuhosg
2010-12-17generic: add LED trigger for USB device presence/activityjuhosg
2010-12-06kernel: fix cryptodev with kernel >= 2.6.35hauke
2010-11-24generic: add rtl8366rb switch vlan fid supportjuhosg
2010-11-12generic: update gpio_buttons driverjuhosg
2010-11-04[kernel] fix mvswitch PHY polling setting (#8133)florian
2010-10-21rt8366*: use __devinit instead of __init for the probe function to fix a sect...nbd
2010-10-12[generic] unify extended vlan id swconfig attributes.jow
2010-10-07cryptodev: Compilefix on 2.6.36mb
2010-09-27generic: RTL8366S/RB: Fix autonegotiation for the WAN port.juhosg
2010-09-27generic: add rtl8366rb switch port rate, port and qos enable/disable supportjuhosg
2010-09-04[kernel] add switch driver for Lantiq PSB6970florian
2010-08-31rtl8366_smi: when setting VLAN ports, always initialize the PVID to ensure th...nbd
2010-08-18generic: rtl8366: allow use of VIDs 16-4095 if vlan4k is enabledjuhosg
2010-08-18generic: rtl8366: add generic code to enable VLANsjuhosg
2010-08-18generic: rtl8366: add enable_vlan{,4k} to smi_opsjuhosg
2010-08-15generic: fix LED control on the RTL8366 switchesjuhosg
2010-08-08rtl8366: re-enable learning by default, disabling it broke switching function...nbd