summaryrefslogtreecommitdiff
path: root/target/linux/generic/files/drivers
AgeCommit message (Collapse)Author
2012-03-07generic: swconfig: add a generic get_port_link implementationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07generic: ar8216: use mdiobus_write in ar8236_hw_initjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07generic: ar8216: use bus->mdio_lock directly in ar8216_mii_{read,write}juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07generic: ar8216: fix phy driver namejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-27[generic] revert unrelated change in previous commitjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-27[generic] partly revert r30708, it breaks various archesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22generic: allow to build myloader mtd parser for 3.2+juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21generic: rtl8366: add rtl8366_smi_write_reg_noack helperjuhosg
After issuing a soft reset on the RT8366{S,RB} switch, waiting for the last acknowlegement fails in rtl8366_smi_write_reg. Add a _noack version of the function and use that for issuing a soft reset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13[generic] rtl8366: fix rtl8366_smi_detect() after r29677jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12ar8216: use vlan configuration for connecting ports (forced to be untagged) ↵nbd
even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12ar8216: do not strip vlan tags when running with vlan_enable=0nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07generic: add driver for the RTL8367R/M switchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07generic: rtl8366: preparing for RTL8367 supportjuhosg
* make clock delay configurable * make read,write commands configurable * use u16 for member and untag fields git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07generic: rtl8366_smi: add timeout messagejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31kernel: swconfig: introduce a generic switch LED triggerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12kernel: ar8216: add support for the AR8236 switchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12kernel: ar8216: move port vlan setup into a separate functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-04kernel: swconfig: add a missing unlock in error pathjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11ar8216: use mdiobus_{read,write} to ensure proper lockingjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21generic: jumbo frames support for rtl8366sjuhosg
This patch adds the option to enable jumbo frames on the rtl8366s switch. This is almost exactly the same as the first patch at https://dev.openwrt.org/ticket/7977 and it has been requested in a comment there. I have tested this and it successfully allows devices on the switch using jumbo frames to communicate. Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-15generic: ar8216: add support for get link statusjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-27swconfig: Add generic switch identifiersjogo
Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24rtl8366_smi: implement a function for detecting whether the attached switch ↵nbd
is RTL8366S or RTL8366RB git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24rtl8366: unify rtl8366s and rtl8366rb platform datanbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01fix the gpio_dev driver: remove existing forward port patches, use ↵nbd
unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09[ledtrig-netdev]blogic
we dont need 1024 bytes buffer. 128 bytes is enough. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FCblogic
This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28ar8316: automatically detect whether port4 is used as PHY or as a switch portnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28ar8216: support AR8316 rev 0 devicesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-26swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCKnbd
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed in 2.6.39, so replace it with DEFINE_SPINLOCK(). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12generic: rtl8366{s,rb}: remove the PHY driver.juhosg
Since the PHY driver is only used for the WAN port and there is virtually no difference between it and the generic PHY driver, we can sefely remove it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-02rtl8306: do not overwrite registers in the phy fixup, it could mess up other ↵nbd
switches (fixes #8911) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26generic: rtl8366s: allow initial register values to be passed via platform_datajuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-09generic: rtl8366: fix build errorjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366: enable vlans before enabling the portsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366: enable ports only after VLAN configuration is donejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366: add enable_port helperjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366_smi: init VLANs only in first switch initializationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366s: use correct bitmasks in sanity checksjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366s: add vlan fid supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366: add debugfs file for VLAN4K tablejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08generic: rtl8366rb: use correct bitmasks in sanity checksjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17generic: add LED trigger for USB device presence/activityjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24generic: add rtl8366rb switch vlan fid supportjuhosg
Allows to use fids 0 to 7. Default is 0. Those who will use this don't forget to `set vlan fid` every time after `set vlan ports` if you want non default behavior. Minor changes. Version bump. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12generic: update gpio_buttons driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04[kernel] fix mvswitch PHY polling setting (#8133)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21rt8366*: use __devinit instead of __init for the probe function to fix a ↵nbd
section mismatch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-12[generic] unify extended vlan id swconfig attributes.jow
AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27generic: RTL8366S/RB: Fix autonegotiation for the WAN port.juhosg
The RTL8366S/RB support connecting a second mac to it and using the 5th port as an independent phy. Therefore we need to handle autonegotiation changes for phy 4 like on a single phy device. This fixes #7980, verified on a WNDR3700. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27generic: add rtl8366rb switch port rate, port and qos enable/disable supportjuhosg
Patch-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23126 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-21 21:16:49 +0000