summaryrefslogtreecommitdiff
path: root/target/linux/generic-2.6/files/drivers
AgeCommit message (Collapse)Author
2009-07-11ar8216: rename the vlan attribute to enable_vlan to keep it consistent with ↵nbd
other drivers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-29ar8216: fix transmission of large frames by setting the switch mtunbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14ar8216: add delay for page switching to work around register setting ↵nbd
corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30fix a crash in ip175c attribute enumerationnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-29Add a driver for Atheros AR8216 switchesnbd
Thanks to Vertical Communications, Inc. for providing access to the documentation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28swconfig: add a generic switch reset callnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20clean up the ip175c driver some more, add support for setting the pvid and ↵nbd
fix querying the phy status git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: add a generic method for setting the port primary vlan id (used ↵nbd
for transparently fixing up pvid for untagged port when setting vlan ports) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: treat struct switch_attr as constantnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: remove old debugging stuffnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-10mvswitch: re-enable header modenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22atheros: in later kernels, vlan 0 no longer works as expected, switch to ↵nbd
(1,2) instead of (0,1) for lan/wan git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware ↵nbd
detection git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-23[kernel] generic-2.6: make MyLoader parser compatible with the old partition ↵juhosg
tables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17[adm5120] move MyLoader partition parser into generic files, will be used on ↵juhosg
ar71xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28improve routing/nat performance for devices using the marvell 88e6060 switchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18change the way ./files* and the generic kernel files are applied. ./files ↵nbd
now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-05[kernel] make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-05[kernel] modules/gpio_dev: move to drivers/char/ on older kernels as well, ↵juhosg
and create a package for it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-04makes ledtrignetdev work on .26 and fix whitespacesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21add missing defines for mvswitchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19some more mvswitch fixes:nbd
- initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19add extra safety for the packet mangling in the mvswitch drivernbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09set marvell switch ATU ageing time to minimum instead of maximum - hopefully ↵nbd
fixes some fonera 2.0 ethernet issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18Remove bogus zero-length ohci-ssb.c in generic-2.6/filesnoz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29enable a different pseudo-vlan mode in the marvell switch (uses a ↵nbd
proprietary header instead of a proprietary trailer) - fixes some mtu issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28allow bigger packets in the marvell switch (does not fix the mtu problems yet)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24fix vlan mapping for cpu port on the marvell switchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23clear VLANTunnel bit on the marvell switch ports - should help with some ↵nbd
bridging issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ ↵nbd
and the upcoming Fonera 2.0 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20Add stub driver for ADM6996F switches (configured through MII)nbd
The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-15[package] move spi_gpio driver into the kernel, clean-up SPI modulesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08[kernel] modules/gpio-buttons: fix build error on older kernelsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08ssb-mips: Fix IRQ routing on the MIPS core.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07[kernel] add a polled GPIO buttons input driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19GPIODEV: Fix open-count race condition.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-07add new led trigger for network traffic, fixes #2776blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19ssb: Update to latest upstream version of ssb.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18b43: Make probing of NPHY devices possible.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02"default-on" LED Triggernbd
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality. Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default. Particular thanks to Rod Whitby for all his help with this. Signed-off-by: Nick Forbes <nick.forbes@incepta.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26add userspace tool for gpio_devblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26remove binary fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26add generic gpio char dev for CONFIG_GENERIC_GPIO archsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-14LED driver for PCEngines ALIX boardsnbd
This patch adds a driver for the three LEDs that exists on the PCEngines ALIX 2 and 3 series boards. The driver is also added to the Alix profile. Signed-off-by: Petr Liebman <petrliebman@gmail.com> -- git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Forgot removing that file while applying patch from #2757florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-20make morse LED trigger available as a package, and fix it to compile with 2.6.23juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-14sync ssb with upstreamnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch ↵nbd
for 2.6.23 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13add patches for 2.6.23 on brcm47xx (not enabled yet)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9279 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:57:46 +0000