summaryrefslogtreecommitdiff
path: root/target/linux/generic-2.6/files/drivers/net/phy
AgeCommit message (Collapse)Author
2010-06-08ip17xx: Fixed error handling in ip175c_set_val()juhosg
Upon error, ip175c_set_val() returned 0 instead of -EINVAL. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08ip17xx: Cosmetic cleanupsjuhosg
Trying to unify capitalization and formatting of comments. Writing of periods at the end of comments is however still inconsistent. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08ip17xx: Consolidate operations with PHY registersjuhosg
Call mdiobus_{read,write} instead of duplicating their code. Introduce ip_phy_write_masked(), which changes a part of a register. Will be used later in this patch series. Please note that it does not hold any lock between reading and writing, so it is up to the caller to serialize. Also add DUMP_MII_IO, which enables logging of all MII accesses. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08swconfig: Fix a bug in use of SWITCH_PORT_FLAG_TAGGEDjuhosg
SWITCH_PORT_FLAG_TAGGED is a bit index, not a bit mask. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16swconfig: Add cpu port index to help output.juhosg
Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11[kernel] swconfig: Check vlan/port indexes for validity.florian
Swconfig needs to make sure that requested vlans/ports actually exist, else it might read or modify memory not belonging to itself. This patch adds a quick range check in swconfig's kernel part to prevent accidential or intentional memory modification. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-10Generic: Clean up output of AR8216 driver.juhosg
This patch is rather a cosmetic patch. It fixes the following issues: * Demote the unknown device message to debug level to not spam the log. * Fix the version print of the unknown device message. * Output the 'attach' message only when attaching as switch driver, not when attaching as phy driver. * Correctly return NET_RX_DROP when dropping packets. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc: bacfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20773 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09generic: make chip detection more reliable in the AR8216 driverjuhosg
Fixes broken ethernet on the Planex MZK-W04NU/W300NH boards. Cc: bacfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05[PATCH 1/2] Add support for the ar8316 switch.jow
This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar8216: fix the mtu register definitionnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09Several small fixes for ar8216 driver (patch by Jonas Gorski)nbd
* Create defines for some magic values/masks. * Change vlan_id to u16, to allow VIDs > 255. * Add a range check to set_pvid as it isn't a VID, but the index in the vlan table. * Set the max VID to 4094, since 4095 is a reserved value and should not be used. * In mangle_rx replace the provided VID with the VID of the table entry of the port, not the index of the table. * In hw_apply, remove a redundant emptyness check (was already checked several lines above). * In no vlan mode do not set the ingress mode to secure, as there are no vlan table entries, but to use the port's destination masks. Otherwise the switch won't forward anything. * In read_status tell that the phy is up (taken from the rtl8306 driver). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24kernel: add driver for the RTL8366RB switchjuhosg
Thanks to Andrew Tarabaras. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24kernel: fix typos in the AR8216 header filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30rtl8366_smi: sanitize gpio values to a 0/1 booleanjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-27rtl8366s: reset the chip early, this allows ethernet to work as soon as possiblejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25rtl8366: make it available on all platformsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09rtl8306: manage the wan port as a separate phy device with proper link ↵nbd
status reading and autonegotiation - the genphy driver does not handle it properly git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the ↵nbd
wrt160nl, fixes wan port detection (#6309) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08fix link status detection in various switch driversnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic ↵nbd
files directory and remove patches for older kernel versions (no longer in use) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-14add a driver for rtl8306 switchesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-11ar8216: rename the vlan attribute to enable_vlan to keep it consistent with ↵nbd
other drivers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-29ar8216: fix transmission of large frames by setting the switch mtunbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14ar8216: add delay for page switching to work around register setting ↵nbd
corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30fix a crash in ip175c attribute enumerationnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-29Add a driver for Atheros AR8216 switchesnbd
Thanks to Vertical Communications, Inc. for providing access to the documentation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28swconfig: add a generic switch reset callnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20clean up the ip175c driver some more, add support for setting the pvid and ↵nbd
fix querying the phy status git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: add a generic method for setting the port primary vlan id (used ↵nbd
for transparently fixing up pvid for untagged port when setting vlan ports) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: treat struct switch_attr as constantnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: remove old debugging stuffnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-10mvswitch: re-enable header modenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22atheros: in later kernels, vlan 0 no longer works as expected, switch to ↵nbd
(1,2) instead of (0,1) for lan/wan git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware ↵nbd
detection git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28improve routing/nat performance for devices using the marvell 88e6060 switchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18change the way ./files* and the generic kernel files are applied. ./files ↵nbd
now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21add missing defines for mvswitchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19some more mvswitch fixes:nbd
- initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19add extra safety for the packet mangling in the mvswitch drivernbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09set marvell switch ATU ageing time to minimum instead of maximum - hopefully ↵nbd
fixes some fonera 2.0 ethernet issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29enable a different pseudo-vlan mode in the marvell switch (uses a ↵nbd
proprietary header instead of a proprietary trailer) - fixes some mtu issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28allow bigger packets in the marvell switch (does not fix the mtu problems yet)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24fix vlan mapping for cpu port on the marvell switchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23clear VLANTunnel bit on the marvell switch ports - should help with some ↵nbd
bridging issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ ↵nbd
and the upcoming Fonera 2.0 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20Add stub driver for ADM6996F switches (configured through MII)nbd
The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73