summaryrefslogtreecommitdiff
path: root/target/linux/cns3xxx
AgeCommit message (Collapse)Author
2012-11-06cns3xxx: refresh kernel config fileluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06cns3xxx: use files directoryluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[cns3xxx]: refresh patcheskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[cns3xxx]: add default packageskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31[cns3xxx]: move PCIe init to subsys init callkaloz
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init as it does not support hotplug. I have modeled the cns3xxx PCIe init after other ARM platforms. Registering it early resolves resource issues occuring during bus enumeration that occur when a device driver is linked static in the kernel. Instead of passing in a bitmask to enable the 2 available ports, link detect is used to enable ports that have a valid link. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17cns3xxx: update FIQ header file and disable RWFOnbd
Update header file appropriately and disable read for ownership Note that the FIQ support implements a workaround that provides a performance boost over the traditional upstream workaround which ensures cache lines are exclusive on driver CPU using 'read for ownership'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/config-3.3 | 2 +- target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch | 9 ++++----- 2 files changed, 5 insertions(+), 6 deletions(-) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17drop GPIODEV platform codeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[cns3xxx]: fix (really this time) laguna UART configkaloz
Properly terminate the correct platform resource for laguna UARTs Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11The Gateworks System Controller (GSC) is an i2c device that provides systemkaloz
level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci). Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[cns3xxx]: fix non terminated uart resources for lagunakaloz
Resolves crashes when probing multiple serial devices Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10cns3xxx: Fix GPIO configuration for Gateworks Laguna boardsnbd
The Laguna boards do not use all the same pins for SDHCI as the Cavium reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10cns3xxx: Fix laguna arm11mpcore watchdognbd
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07cns3xxx: add sysupgrade supportnbd
Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/base-files/lib/cns3xxx.sh | 22 ++ target/linux/cns3xxx/base-files/lib/upgrade/platform.sh | 122 ++++++++++++++++ target/linux/cns3xxx/image/Makefile | 19 +- 3 files changed, 159 insertions(+), 4 deletions(-) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07cns3xxx: add GW2383 board supportnbd
Add GPIO/LED support for Gateworks GW2383 Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/300-laguna_support.patch | 18 +++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07cns3xxx: fix gpio access and add gpio IRQ supportnbd
Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch | 536 ++++++++++++++++++++ 1 file changed, 536 insertions(+) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30cns3xxx: add missing kernel config symbolnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28Add FIQ support for cns3xxxkaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28Update board support for Gateworks Laguna Product familykaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28USB iso mode fixeskaloz
Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27[cns3xxx]: fix ncores for single-core systems.kaloz
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS shows which ones are active. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27[cns3xxx]: add i2c retrieskaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27[cns3xxx]: fix pcie abort handlingkaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22cns3xxx: fix ethernet driver tx completion and queue stop/startnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22cns3xxx: implement ethernet fraglist tx support for improved bridging ↵nbd
performance with jumbo frames git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21[cns3xxx]: move gpio stuff into the right filekaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21cns3xxx: add a small optimization for rx offloadnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21cns3xxx: fix ethernet port lookup for multi-descriptor jumbo framesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20cns3xxx: fix ethernet packet alignment issues (hw has an alignment ↵nbd
requirement of 64), fix skb fragment chaining git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: remove the broken flagnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix kernel confignbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and ↵nbd
skb fragment lists git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix ethernet tx checksum offloadnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: merge ethernet driver changes from gateworksnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: build images for the old boot loader and the new one (default to ↵nbd
the new one) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix the ethernet driver makefilenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: reorganize patches, fix pcie io space init ordernbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() callsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: add missing callbacks for the laguna machine supportnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25[cns3xx] laguna: fix eeprom read buffer size during platform configurationblogic
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna. The model name read in is 16 bytes but the original buffer was only 8 bytes. Signed-off-by: David Acker <dacker@rajant.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[kernel] bump to 3.3.8blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27cns3xxx: remove 3.1 supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27cns3xxx: switch to 3.3 and add broken flagjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18cns3xxx: add support for 3.3juhosg
Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18cns3xxx: sync kernel configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18cns3xxx: remove 2.6.39 supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18cns3xxx: switch to 3.1juhosg
Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15linux: move certain disabled symbols to the generic configsjuhosg
* CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21cns3xxx: remove 2.6.31 supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[cns3xxx]: enable another l2 cache errate on newer kernelskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11[cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels ↵kaloz
as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 05:16:35 +0000