summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
AgeCommit message (Collapse)Author
2014-02-23brcm63xx: update LINUX_VERSION to 3.10.32juhosg
Missed from the previous comit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23kernel: update 3.10 to 3.10.32juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix RG100A/DB120 usb port numberjogo
Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of usb ports for HW556 variantsjogo
Don't only fix up the fallback board, but also all three variants. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add initial support for BCM963268BU_P300 reference boardjogo
Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add VW6339GU supportjogo
Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of switch ports for BCM63168/63268jogo
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268 has two additional RGMII ports, making it 8. Fix this by checking the chip variant and applying an appropriate limit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board support (image, base-files)fast2504n-3.10.28-mergedjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board supportjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4729/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add support for Asmax AR 1004g routerjogo
Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL routerjogo
This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-27brcm63xx: fix warning in Redboot codeflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-26kernel: update 3.10 to 3.10.28juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-21brcm63xx: enable support for BCM63268florian
Support for the BCM63268 is usable, enable it by default. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-21brcm63xx: add support for BCM963269BHR boardflorian
Add kernel support for the BCM963269BHR board, USB and Ethernet switch, LEDs and buttons are working. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-21brcm63xx: improve BCM63268 supportflorian
Allow using the HSSPI controller since it works just fine, as well as the integrated switch core, since that one works too. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: fix typo breaking build in r39325jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: set usb host port number for some devicesjogo
Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: allow setting the number of usb host ports for boardsjogo
Allow setting the number of available usb host ports for boards with additional sanity checks to allow using the second port on devices where it is available. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: add USB support for BCM63268jogo
Add and enable USB support for the BCM63268 family of SoCs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI toojogo
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI and BCM63XX_HAS_OHCI are not selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19brcm63xx: prevent usb clock state inconsistency on BCM6318jogo
Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-16brcm63xx: do not add twice the same field to boardflorian
Changeset r39302 updated a board section and added twice .has_ehci0, this is not necessary, so fix it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-15brcm63xx: add USB support to BCM6318florian
BCM6318 has a special initialization sequence which involves touching PLL control registers in the USBH_PRIV register space, as well as toggling a bit the Simulation control register. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-15brcm63xx: fix BCM96318MVWG LEDsflorian
Power LED is not active low, and ppp-fail is red, not green. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-15brcm63xx: remove config-3.11florian
This was not supposed to be committed, remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: 96368MVWG supports USB gadget, enable itflorian
Enable the use of the USB gadget device at the board level so we can use bcm63xx_udc on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: replace gadget driver build fix with upstream submissionflorian
Also fixing a build warning due to a misplaced parenthesis in the previous submission. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: add support for the BCM96318REF_P300 boardflorian
Very similar to the BCM96318REF board except for the name and the SDRAM/DDR configuration which is totally transparent for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: enable 6318 supportflorian
BCM6318 support is usable enough to be enabled by default, turn it on. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: add basic support for the BCM96318REF boardflorian
Add basic support for the BCM96318REF board which is comprised of: - HS-SPI flash support - Ethernet switch support - USB slave device support Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: improve BCM6318 supportflorian
Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: package the USB gadget module (bcm63xx_udc)florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: target supports USB gadget devicesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: fix USB gadget build failure after 6345 Ethernetflorian
While adding support for BCM6345 Ethernet, some changes in the macros ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget driver fail to build. Fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: allow HSSPI registration on 6318florian
A missing condition check in dev-hsspi.c prevented the controller from being registered on 6318 where it is fully functional. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: fix build failure on varidflorian
varid might both unused and unitialized when building for e.g: bcm6318, fix these two warnings turned into errors. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix ohci frame number offsetjogo
BCM63XX's ohci controller does not need the frame number shift, but that was guarded with a PPC symbol. Fix this by making the no-fix generally available. This is a regression from the previous conversion to ohci platform driver. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix spi flash setup on (at least) some reference boardsjogo
CFE seems to leave the SPI flash mapping in an invalid state after loading the kernel on some reference boards, so fix it up on boot. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add initial support for BCM6318jogo
Add inital support for BCM6318, but keep it disabled for now until most things are supported. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add initial support for BCM63268jogo
Add initial support for the BCM63268 family of SoCs, but keep it disabled for now as most things don't work yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix the pcie window sizejogo
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big, not 16 MiB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add support for chip variantsjogo
Some SoCs have variants which are mostly the same, but use a different chip id (or not). Add code for detecting them and handling them as their standard counterparts. This adds support for e.g. BCM6369. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: remove non runtime detect and refresh affinity patchesjogo
Remove the non runtime detect code since its effectiveness is dubious and almost never used. Also update affinity patches to work on top of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update bmips patches with upstream submissionjogo
Update bmips cleanup patches with upstream submission and backport a few bmips fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: spi flash on legacy spi controller needs the workaroundjogo
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs additional fixes for M25P80, so it remains broken for now. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix legacy spi tranfers >= 256 bytesjogo
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes are not affected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update HSSPI driver with upstream submissionjogo
Update the HSSPI driver with the upstream submitted one that has a workaround for the auto cs down issue. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39264 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 05:32:02 +0000