summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
AgeCommit message (Collapse)Author
2011-02-08[brcm63xx] fix build of brcm-wlflorian
The fallback needs to be exported for bcm63xx, too. Runtime tested with a BCM4322 on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27[brcm63xx] give some credits to Tanguy Bouzeloc in the spi driverflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-29[brcm63xx] multiple SPI driver fixesflorian
- fix platform device registration - fix chipselect, command register defines, add missing clock - make slave select proper - fix multibytes transferts Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28[brcm63xx] patches-2.6.35: mtd flashmap: Really fixed sparelen and ↵cshore
rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28[brcm63xx] patches-2.6.36: Fix flashmap spare length calculation from ↵cshore
previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28[brcm63xx] spi driver: remove bcm_rset usageflorian
Since bcm636x platform embeds two spi master device, the attached patch removes static bcm_rset usage, replaced by "bs->regs" field for all I/O operation. Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26Added OpenWRT-specific field to imagetag so that we can record the real root ↵cshore
length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26base-files: Added uci-defaults script to run mtd fixtrx on firstboot for ↵cshore
devices that need it. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26mtd flashmap: Switched to calculating the rootfs size rather than depending ↵cshore
on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10[brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are ↵cshore
based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are ↵cshore
going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: Make buttons and led modules included by default so ↵cshore
that failsafe will work in the case of builds for releases. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than ↵cshore
default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes ↵cshore
before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix ↵cshore
MX29LV640T." This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5. It belongs in generic not brcm63xx. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T.cshore
Thanks blunoise git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are ↵cshore
different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches: Refreshed patches after led_countcshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] board definitions: Added patch for calculating led count, which ↵cshore
was part of the patch removed in the previous commit git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the ↵cshore
GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] base-files: Added the preinit information for reset button and ↵cshore
preinit indication led, and preinit interface git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] board definition: Fixed CPVA642 LED definitionscshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and ↵cshore
refreshed patches later in series due to fuzz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[bcm63xx] base-files: Added network defconfig because board only has one ↵cshore
ethernet (4-port switch) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[brcm63xx] image Makefile: Corrected router imagename length limiting. ↵cshore
Thanks KanjiMonster for reminding me. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add support for the T-Com Speedport W 500V.cshore
Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add board id override fixup.cshore
Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Finalize support for DSL-274xB, rev C2.cshore
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Allow 'colored' power leds.cshore
Since some devices have more than one power led, they might be separated by their color in the name. To also allow them to be on after leaving preinit, set any status led starting with 'power' to on instead of only those with the exact name of 'power'. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Don't hardcode the switch ethernet interface in preinit.cshore
Currently eth1 is hardcoded as the expected interface switches in diagmode. This patch replaces the eth1 with the ifname, and also directly tests if the interface specified by ifname has a switch attached. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add defconfigs.cshore
Port the mechanism for different default configurations from ar71xx and use the old configuration as the default configuration. This should have no functional differences to before. While we are at it, remove the obsolete nat option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24update to the latest stable kernelskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24[brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 ↵cshore
macro definition. The solves the strange whitespace in front of the image name in the info1 section git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[brcm63xx] image: Limited image name put into the info1 field to 16 ↵cshore
characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-19[brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO ↵cshore
led/buttons not known). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag ↵cshore
writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06[brcm63xx] Add wps button on alice gateclaudio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04update kernels to 2.6.32.25 and 2.6.35.8kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27[brcm63xx] register uart driver on livebox (#8013)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27[brcm63xx] refresh 2.6.35 patchesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-24[brcm63xx] Fix nxp_74hc164 driver compile error (builbot)claudio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-18[brcm63xx] fix platform_devices registrationflorian
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] remove 2.6.32 supportflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] fix SPI driver, move register out of driver codeflorian
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] restore kernel oldconfigflorian
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] refresh patchesflorian
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] refresh nb4 support. Register 74x164 deviceflorian
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] add spi devices board info int bcm63xx_boardsflorian
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17[brcm63xx] add 74x164 SPI chip supportflorian
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23499 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 22:16:03 +0000