summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
AgeCommit message (Collapse)Author
2012-05-27bcm63xx: build images for DSL-274XB revision F1jogo
Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add ath9k to atheros wifi profilejogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: enable bcm6328 support and required driversjogo
BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add support for DSL-274XB rev F1jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: fix port state after network downjogo
bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add a fixup for ath9k devicesjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add support for the HSSPI controllerjogo
Add support for the HSSPI controller found on bcm6328 and SPI attached flash. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add preliminary support for bcm6328jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add flash type detectionjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: pad Speedport W303 V images to 4 MiBjogo
Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: add a default switch configuration for DSL-274XBjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: setup network config through uci-defaultsjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: move the board name workaround to /lib/brcm63xx.shjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: use the exact board id as board identification stringjogo
No need to keep the bcm63xx/ at the start or the chipid info at the end. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23kernel: update linux 3.3 to 3.3.7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15linux: move certain disabled symbols to the generic configsjuhosg
* CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14kernel: update linux 3.3 to 3.3.6juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07kernel: update linux 3.3 to 3.3.5juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06bcm63xx: fix a race between PCI bus scan and fallback sprom registrationjogo
The fallback sprom handler was installed too late, resulting in ssb failing to get a valid sprom on some devices. Fixes #11384. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02[brcm63xx] use a define for the poll and debounce intervalflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30kernel: update linux 3.3 to 3.3.4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27[brcm63xx] switch to gpio-keys-polledflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24bcm63xx: drop linux 3.2 supportjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24bcm63xx: drop linux 3.0 supportjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24bcm63xx: switch kernel to 3.3jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: enable bcm6368 for linux 3.3 and build imagesjogo
Only build bcm6368 images when building for linux 3.3. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: add initial support for bcm6368 boardsjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: add driver for the internal hw trng on bcm6368jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: replace SPI driver with latest upstream versionjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: add ethernet support for bcm6368jogo
Add basic support for the internal ethernet switch on bcm6368. It behaves as a dumb switch for now, but allows basic connectivity. Also drop the ethernet patch for bcm6345 for now, it needs rework. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: add missing bits from extirq supportjogo
Add missing external IRQ code parts for older chips in the new code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: reorder patchesjogo
Reorder patches for a clearer distinction between the purposes of the different patches. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19targets: replace madwifi in profiles with ath5k, madwifi is unmaintainednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13[brcm63xx] remove udc patch since it is unusedflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] remove 3.1 supportflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-genericflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] generate generic images for BCM96358VW and BCM96358VW2 (#10666)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] wire bcm96348gw-10 reset button (#10854)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05Merge branch 'bcm63xx'florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-04brcm63xx: add support for linux 3.3jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31kernel: update linux 3.0 to 3.0.18jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30[brcm63xx] build 96348R imagesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30[brcm63xx] remove support for 2.6.39florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30[brcm63xx] bump to 3.0.17florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13brcm63xx: add support for linux 3.2jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13kernel: update linux 3.1 to 3.1.9jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13kernel: update linux 3.0 to 3.0.17jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11[brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 ↵cshore
isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-21[brcm63xx] don't package gpioctl by defaultflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19[brcm63xx] fix D-Link DSL-2650U image generationjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 11:59:00 +0000