summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
AgeCommit message (Collapse)Author
2008-05-18bcm96345: correct some 6345 specific stuffnbd
This fixes some problems with the 6345 support and adds a macro for CPU identification that is easier on the eyes. The first thing it does is to not initialize MPI on the 6345 as it does not have PCI. The second thing it does is to use a static value for the CPU frequency of the 6345 chip to provide an accurate timer. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: fix cfe detectionnbd
The CFE detection failed to account for zero termination. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: add new timer codenbd
This basically selects the new generic MIPS timer code for BCM963xx and simplifies the timer setup code. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: remove obsolete timer codenbd
This removes some code that has been deprecated in kernels >= 2.6.24. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: fix uart isrnbd
The ISR ended up in an endless loop because the TX ISR never got used or masked. This patch basically makes the TX ISR mask the the TX interrupt when it encounters it, because it doesn't even use the TX interrupt. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: rewrite irq handling codenbd
This patch adds interrupt handling as on AR7. The old code was very messy and didn't work too well. It also removes the unused file int-handler.S. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: add missing trailing zero to load addressnbd
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current sources. I think this is just a typo, so this patch fixes it (tested on 96345). Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: flashmap supportnbd
Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: serial port supportnbd
Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: board supportnbd
Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: add 2.6.25 configuration filenbd
Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: use the 2.6.25.1 kernelnbd
Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: image generation using image taggernbd
This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: fix load address / kernel entrynbd
Current kernels have the same kernel entry as load address, so just set them like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this too. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-09enable proper PCI & USB support detection at config-time by disabling ↵nico
CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28upgrade to 2.6.24.5kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-27properly disable CONFIG_CRYPTO_HWnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-11Delete config-default file and resync kernel configuration for brcm63xxflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-01brcm63xx image generation cleanups (#3169)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-13Upgrade brcm63xx to 2.6.24florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11[brcm63xx] resync kernel configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11upgrade & standardize kernel versionskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-01fix initramfsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10make the image filenames a bit shorternbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23move crypto support to a seperate crypto.mk file, split modules into ↵nico
multiple packages and adjust dependencies, sync crypto options in kconfigs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ↵nico
(closes: #2297, thanks to aorlinsk), sync 2.4 / 2.6 kconfigs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19clean up jffs2 config optionsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08adapt profiles for subtarget changesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08major target cleanup. it is now possible to have subtargets that can ↵nbd
override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06strip the kernel version suffix from target directories, except for brcm-2.4 ↵nbd
(the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 05:18:44 +0000