summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/image
AgeCommit message (Collapse)Author
2012-05-30bcm63xx: build images for 6328 reference boards with various flash sizesjogo
Build images for 96328avng and 963281TAN (untested) for three different flash sizes: 4MB, 8MB, and 16MB. Known issues: * Button setup unknown, thus no fail-safe available. * All other BCM6328 and BCM63XX issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: build images for DSL-274XB revision F1jogo
Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27bcm63xx: pad Speedport W303 V images to 4 MiBjogo
Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24bcm63xx: drop linux 3.2 supportjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28bcm63xx: enable bcm6368 for linux 3.3 and build imagesjogo
Only build bcm6368 images when building for linux 3.3. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-genericflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05[brcm63xx] generate generic images for BCM96358VW and BCM96358VW2 (#10666)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30[brcm63xx] build 96348R imagesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19[brcm63xx] fix D-Link DSL-2650U image generationjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-18[brcm63xx] build images for D-Link DSL-2650U (#9003)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13[brcm63xx] build images for Pirelli A226M (#10409)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20[brcm63xx] add support for DSL-2640B rev B2florian
Signed-off-by: Adrian Feliks <mexit@o2.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20[brcm63xx] add support for D-Link DVA-G3810BN/TLflorian
This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add support for the T-Home Speedport W 303Vflorian
Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Update support for the DSL-274xB revision Cflorian
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Decouple Board ID and image name for fixupflorian
Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15[brcm63xx] Generate images for RTA1320_16M-based routerscshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19[brcm63xx] add support for HW553 bcm6358-based boards (#8844)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10[brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are ↵cshore
based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are ↵cshore
different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[brcm63xx] image Makefile: Corrected router imagename length limiting. ↵cshore
Thanks KanjiMonster for reminding me. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add support for the T-Com Speedport W 500V.cshore
Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add board id override fixup.cshore
Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Finalize support for DSL-274xB, rev C2.cshore
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24[brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 ↵cshore
macro definition. The solves the strange whitespace in front of the image name in the info1 section git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[brcm63xx] image: Limited image name put into the info1 field to 16 ↵cshore
characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-19[brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO ↵cshore
led/buttons not known). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag ↵cshore
writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12define a shared IMG_PREFIX variable used as a basename for image files, it ↵nico
contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-01[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single ↵florian
struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29[brcm63xx] do not generate trx images, this is uselessflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09[brcm63xx] add support for the Pirelli AG226G board (#5337)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31[brcm63xx] generate images for RTA1025W_16-based routers (#5594)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26[brcm63xx] generate images for the bcm6338wflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-18[brcm63xx] add imagetag support for BT Voyager 2500V, patch from Daniel ↵florian
Dickinson (#5364) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17[brcm63xx] generate experimental images for bcm6338 boards, thanks to Daniel ↵florian
Dickinson git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10[brcm63xx] use build system REVISION variable (#5317)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10The attached patch adds building of firmwareflorian
images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09[brcm63xx] rework imagetag firmware generator and MTD partition parser to ↵florian
accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19[brcm63xx] make images that can be flashed using the stock firmware web ↵florian
interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-07[brcm63x] imagetag's -k argument is expected to be hexadecimal instead of ↵florian
decimal (#4885) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-16[brcm63xx] add the CFE offset command line option to the imagetag utility, ↵florian
closes (#4366) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31[brcm63xx] add support for user9102 boards (#4537)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29[brcm63xx] generate images for old CFE based boards like the Davolink DV201florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12Build images for Inventel Liveboxflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10Add support for Sagem F@ST2404 (#4332)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13583 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 14:48:14 +0000