summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/files
AgeCommit message (Collapse)Author
2009-06-28[brcm63xx] off-by-one gpio numbers for bcm6338florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] bcm6338 can support PCI since it has MPIflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI ↵florian
registers now that we have it defined correctly git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] fix the flash address comment and register the flash device again ↵florian
with its proper physical address on 6338/6345 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] fix a stupid typo preventing the board from being detectedflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] prevent bcm6338 and bcm6345 from crashing very earlyflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] only register fallback sprom and enable PCI if we actually have ↵florian
support for PCI git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27[brcm63xx] more missing register definitions for bcm6338florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26[brcm63xx] more bcm6338 and bcm6345 related fixesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26[brcm63xx] define bcm6338 SDRAM base register and make sure that the right ↵florian
CPU id will be used to detect a bcm6338 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26[brcm63xx] add board definitions for the bcm6338wflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-18[brcm63xx] add imagetag support for BT Voyager 2500V, patch from Daniel ↵florian
Dickinson (#5364) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10The attached patch adds building of firmwareflorian
images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09[brcm63xx] cleanup the watchdog driver a bitflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09[brcm63xx] fix the watchdog driver and enable it by defaultflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09[brcm63xx] rework imagetag firmware generator and MTD partition parser to ↵florian
accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-08[brcm63xx] remove this line which got accidentaly succesfully applied, but ↵florian
should not have (#5285) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] fix ethernet driver removalflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] fix pcmcia device removalflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] add missing null entry in pcmcia driverflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] request gpio pins and set direction correctly for pcmciaflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] be SMP safe even with gpiolibflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] cache gpio values in gpio_setflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] use the correct number of GPIOs for bcm6358florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04[brcm63xx] register gpiochip earlier, allowing gpio-based runtime detection ↵florian
to be performed in board_init callback git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-03[brcm63xx] merger mtu/802.1q related fixes:florian
bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU. This patch also fixes the reception of 802.1q frames for default MTU which were reported as oversized. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-01[brcm63xx] backport an upstream fix: We're not disabling IRQ, so we must ↵florian
call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-17[brcm63xx] add support for sysupgrade (#5117)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30[brmc63xx] register gpiodevflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19[brcm63xx] fix redundant driver name printing in probe functionflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19[brcm63xx] make images that can be flashed using the stock firmware web ↵florian
interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-08[brcm63xx] some more fixes to the SPI controller driverflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-21[brcm63xx] enable all blocks on 6338 and uart clock on 6345florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-20[brcm63xx] add support for bcm6345 SoC, needs testingflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17[brcm63xx] fix SPI register switch and prepare for UDC, thanks to Henk ↵florian
Vergonet (#4783) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-11[brcm63xx] do not duplicate fifo_size, since RX and TX fifo sizes are the ↵florian
same, request_mem_region on the registers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-10[brcm63xx] make SPI work in full-duplex mode by defaultflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] add bcm63xx_spi based on reading ↵florian
shared/opensource/flash/spiflash.c from the consumer releases, needs testing git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] fix SPI accessorsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] fix typo for the bcm6338 spi IRQ, change platform driver name and ↵florian
make the SPI irq be fetchable by platform driver initialization code git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] compile and register SPI controller deviceflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] make bcm6358 consistend with the other boards namingflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08[brcm63xx] fix some SPI register definitions and platform-device ↵florian
registration code git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06[brcm63xx] prepare for SPI controller driverflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06[brcm63xx] fix SPI register definitionsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-02[brcm63xx] fix a bcm963xx-flash warningflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27[brcm63xx] provide a sane SPROMv2 to make on-board bcm4318 card work, thanks ↵florian
mb__ git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27[brcm63xx] move the device registration to an earlier initcall level, ↵florian
required for fallback SPROM to work git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31[brcm63xx] add support for user9102 boards (#4537)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 09:54:17 +0000