summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx
AgeCommit message (Collapse)Author
2012-12-14brcm47xx: improve suppressing printing if a module was found in preinit ↵hauke
function. Thank you Bastian Bittorf git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: Additional BCM4716 supporthauke
Additional BCM4716 support. Still needs working ethernet driver. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: BCMA - Broadcom 2011 SDK Updateshauke
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't noticed any obvious changes in behavior with them applied; but thought I should at least pass them on. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: return the real irq number in bcma_core_irqhauke
The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: use kernel 3.6.10 by default nowhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13brcm47xx: suppress printing if a module was found in preinit function.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13kernel: in kernel 3.6.8 and later tg3 depends on hwmon.kohauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-12kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testinghauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-05kernel/3.3: move OHCI and EHCI platform drivers to genericflorian
These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-02brcm47xx: read sprom vars without prefix for boardrev and boardtype if the ↵hauke
prefixed one is not available. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29remove common symbols from 3.6 configsjuhosg
The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29remove common symbols from 3.3 configsjuhosg
The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29kernel: update linux 3.6 to 3.6.8juhosg
Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: fix title of Bcm4705-wl profilehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: add profile for bcm4705 with wl driverhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25brcm47xx: whitespace cleanupshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: fix cpu clock detection on ASUS WL-520gUhauke
The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: watchdog: deactivate NOWAYOUT.hauke
In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24brcm47xx: update watchdog driverhauke
This watchdog driver should work with SoC having a PMU. This fixes #11720. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18kernel: refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18brcm47xx: add support for kernel 3.6hauke
This is based on the patch by Peter Wagner. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-15brcm47xx: revert r33935: check for .ELF header in partition parserhauke
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE. russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420. With the patch the linux partition also contained the loader which is in the first 128KB. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12brcm47xx: remove double definition of kmod-tg3 added in r34150hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12brcm47xx: fix cfe config detection on WGT634U broken in r33920hauke
Thanks Russell Senior for reporting this. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11brcm47xx: remove ssb-gige packagehauke
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27[brcm47xx]: generate images for the D-Link DWL-3150 as wellkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25brcm47xx: check for .ELF header in partition parserhauke
The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25kernel: update bcma and ssb to master-2012-10-18 from wireless-testinghauke
* update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23kernel: move the bcma fallback sprom fix to genericjogo
bcm63xx needs the bcma fallback sprom fix, too. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17drop GPIODEV platform codeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04[brcm47xx]: bcma: do not initialize deactivated PCIe coreshauke
Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04[brcm47xx]: use memcmp in mem size detection as suggested by blogichauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: bcma: use fallback sprom if sprom on card was not validhauke
Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: bcma: initialize sprom earlierhauke
The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: run make kernel_oldconfighauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: ignore the last page on bcma based SoCshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: Fix reading sprom from nvram without a prefixhauke
The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: improve the check for the memory sizehauke
This will hopefully fix bug #9360 and #9097 in trunk. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[brcm47xx]: activate failsafe on all ports of the switch and not just port 0.hauke
Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20[brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCshauke
When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19brcm47xx/profiles/PS-1208MFG: remove reference to non-existing packageflorian
The package block-hotplug doesn't exist, refer to block-mount instead. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update fix-boot patch.hauke
Do not change the code any more but use the kconfig options git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update gpio patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13generic: move GENERIC_PWM symbol into the generic configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-11[brcm47xx]: add gpio sysfs entrieshauke
This fixes #10256 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22[brcm47xx] update profileshauke
* add profile for BCM4705 based SoC using tg3 instead of b44 * remove redundant 105-Atheros.mk * reorder git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18[brcm47xx] remove unused filehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18[brcm47xx] make brcm47xx build only with bcma or only with ssb support.hauke
There are some ifdefs missing so when only ssb or only bcma was selected in the kernel config it did not build. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18[brcm47xx] update gpio patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33208 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 14:36:23 +0000