summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx
AgeCommit message (Expand)Author
2008-11-25move THERMAL symbols into the generic configkaloz
2008-11-12[kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patchesjuhosg
2008-11-09Build b43, b43legacy and ath9k for kernels >= 2.6.27 from mac80211. Include b...florian
2008-11-07[kernel] update to 2.6.25.19, and refresh patchesjuhosg
2008-11-02turn the wrtsl54gs workaround into a more generic fix and reduce the chance o...nbd
2008-10-20[brcm47xx] fix boot failure on some boardsjuhosg
2008-10-18change the way ./files* and the generic kernel files are applied. ./files now...nbd
2008-10-02Add workaround for eth0/1 PHY on WRTSL54GSnoz
2008-09-27[ath5k] create a profile for brcm47xx and ixp4xxagb
2008-09-27[brcm47xx] make b43 the default profileagb
2008-09-26[kernel] update to 2.6.26.5 and 2.6.25.17juhosg
2008-09-24disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable i...nico
2008-08-22[kernel] update to 2.6.26.3 and 2.6.25.16juhosg
2008-08-14[brcm47xx] refresh 2.6.23 patchesjuhosg
2008-08-13Now we have b43 working in master mode, include b43 in the profile (#3827)florian
2008-08-07[kernel] update to 2.6.25.15 and 2.6.26.2juhosg
2008-07-26[kernel] update to 2.6.25.12juhosg
2008-07-22[brcm47xx] fix compile error (closes #3799)juhosg
2008-07-20Update gpiommc to use configfsmb
2008-07-16Disable ubsec ssb by default on WGT634U until it gets fixedflorian
2008-07-15Include ubsec ssb in the WGT634U profileflorian
2008-07-08[brcm47xx] On embedded devices we must not route the interrupts through the PCInoz
2008-07-05update targets to 2.6.25.10kaloz
2008-06-26upgrade to 2.6.25.9kaloz
2008-06-17[kernel] upgrade to 2.6.25.7, and refresh patchesjuhosg
2008-06-16[brcm47xx] Fix TG3 build. Thanks Hauke Mehrtensnoz
2008-06-11upgrade to 2.6.25.6kaloz
2008-06-03[brcm47xx] Update 2.6.25 confignoz
2008-06-03[brcm47xx] Build against 2.6.25.4noz
2008-05-27[brcm47xx] Remove obsolete CFE workaround, now proper fix went in r11275noz
2008-05-22Add a WL500GPv1 profile (#3395)florian
2008-05-20Revert last 3 commits made in error. Proper versions will come laternoz
2008-05-20Build brcm47xx against 2.6.25.1noz
2008-05-20Update generic-2.6 and brcm47xx 2.6.25 configsnoz
2008-05-19[brcm47xx] refresh kernel patchesjuhosg
2008-05-18[brcm47xx] Fix kmap_coherent use on 2.6.25 kernelsnoz
2008-05-18[kernel] upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2....juhosg
2008-05-16[generic-2.6] Remove files now present upstream in files-2.6.25noz
2008-05-09enable proper PCI & USB support detection at config-time by disabling CONFIG_...nico
2008-05-02[brcm47xx] fix GENERIC_GPIO supportjuhosg
2008-05-01[brcm47xx] Disable CONFIG_CONNECTOR in config-2.6.23agb
2008-04-27properly disable CONFIG_CRYPTO_HWnico
2008-04-25First step to upgrade of brcm47xx to kernel version 2.6.25noz
2008-03-23Fix b44 phyaddr by applying the PHY-address mask. Closes #3712agb
2008-03-21linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interf...mb
2008-03-19bcm47xx: Fix warningmb
2008-03-19bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpiomb
2008-03-15bcm47xx: Fix GPIO data direction output bit assignmentmb
2008-03-13Update cleanups of ssb-gigemb
2008-02-28SSB-GigE: Fix IRQ routing. This makes the device work. Yay! :)mb
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 10:33:47 +0000