summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx
AgeCommit message (Collapse)Author
2011-08-12brcm47xx: fix flash detection on chipcommon less devices.hauke
This closes #9906 Thank you for the report Kim git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-06kernel: update to kernel version 3.0.1hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04brcm47xx: use kernel 3.0hauke
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04brcm47xx: update patcheshauke
* this adds sflash support for ssb devices * the flash is now a platform device * minor updates git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pcihauke
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but this causes a data bus error (oops) on a SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-23brcm47xx: build bcma into the kernelhauke
Now we can assume that every brcm47xx kernel has the bcma module build into the kernel. This is not needed for this version as this does not support bcma as system bus but kernel 3.0 will. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22brcm47xx: remove old kernel versionshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22brcm47xx: update bcma and ssb to master-2011-07-21hauke
* add new patches for bcm4716 SoC * add support for serial flash on bcma bus git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-22kernel: update to linux-3.0 and refresh patches.hauke
Thank you Peter Wagner for the patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29brcm47xx: deactivate wndr3400 for now as this device will not boothauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28brcm47xx: generate image to flash on Netgear WNDR3400.hauke
The image will not boot because serial flash support is missing this is only for experts. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28brcm47xx: add initial support for devices with bcma bus.hauke
Ethernet and wifi are not working and this is highly experimental. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28kernel: refresh patches for kernel 3.0-rc5hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28kernel: update ssb and bcma to linux-next next-20110628hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28kernel: update kernel to 2.6.39.2hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27brcm47xx: update kernel to version 2.6.39hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27kernel: update ssb and bcma to linux-next next-20110627 hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27brcm47xx: fix Linux-3.0 and fix clock rate detection.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18brcm47xx: refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18kernel: update to kernel 2.6.38.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18brcm47xx: add support for kernel 3.0hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15bcm47xx: Remove kernel checks from image Makefilehauke
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25brcm47xx: initial 2.6.39 support for brcm47xxhauke
Thank you Peter Wagner for the patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25brcm47xx: remove old kernelhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25brcm47xx: fix partition layout on SimpleShare devices.hauke
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here. This fixes #9323 Thank you Will Holmes for the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07brcm47xx: update patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05brcm47xx: when detecting a ssb pci device without an own sprom write the ↵hauke
sprom data from the platform device to the correct pointer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05brcm47xx: fix typo in patchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-01brcm47xx: add fallback sprom for pci devices without an own sprom.hauke
If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-08brcm47xx: upgrade to kernel 2.6.27.6.hauke
This should be save now. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-07brcm47xx: add initial support for kernel 2.6.38hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-19brcm47xx: remove kmod-usb-ohci from WGT634U packages.hauke
This package creates some error messages on startup Thank you russell-- for reporting git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-18remove 2.6.34 supportkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13brcm47xx: add workaround for fuse again.hauke
This closes #4754 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13ssb: update ssb to version from linux-next-20110311hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13kernel: update to kernel version 2.6.37.3hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13kernel: update to kernel version 2.6.34.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19[kernel] update to kernel 2.6.36.4florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-24platform specific patches don't belong here - take #2kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-24platform specific patches don't belong herekaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-11brcm47xx: add gpio_set_debounce functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-02brcm47xx: fix compile problem when serial is deactivated.hauke
Thank you Andrey git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22kernel: add config option added in kernel 2.6.37-rc7 to generic and run make ↵hauke
kernel_oldconfig for brcm47xx. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22brcm47xx: refresh patches with kernel 2.6.37-rc7hauke
The deleted patches went upstream in 2.6.37-rc7 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-21brcm47xx: wgt634u mac address fixhauke
The Netgear wgt634u uses minus between the hex digest of the mac address and all other broadcom devices are using colons between the hex digest. Now the mac address is correctly parsed also when minus is used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16brcm47xx: add ssb debug option.hauke
This fixes a problem with wrt350n. It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS" Thank you sn9 for fixing this problem. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16brcm47xx: add some missing pci ID for tg3 driverhauke
Broadcom removed these pci id, but at least the wrt350n has a Ethernet controller with a pci id of 14e4:1676 Thank you sn9 for fixing this problem. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16brcm47xx: this patch went upstreamhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-11kernel: update kernel versionshauke
Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05brcm47xx: do not read from CFEhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24267 3c298f89-4303-0410-b956-a3cf2f4a3e73