summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-3.3
AgeCommit message (Collapse)Author
2012-12-12kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testinghauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-05kernel/3.3: move OHCI and EHCI platform drivers to genericflorian
These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-15brcm47xx: revert r33935: check for .ELF header in partition parserhauke
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE. russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420. With the patch the linux partition also contained the loader which is in the first 128KB. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12brcm47xx: fix cfe config detection on WGT634U broken in r33920hauke
Thanks Russell Senior for reporting this. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25brcm47xx: check for .ELF header in partition parserhauke
The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25kernel: update bcma and ssb to master-2012-10-18 from wireless-testinghauke
* update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23kernel: move the bcma fallback sprom fix to genericjogo
bcm63xx needs the bcma fallback sprom fix, too. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17drop GPIODEV platform codeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04[brcm47xx]: bcma: do not initialize deactivated PCIe coreshauke
Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04[brcm47xx]: use memcmp in mem size detection as suggested by blogichauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: bcma: use fallback sprom if sprom on card was not validhauke
Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: bcma: initialize sprom earlierhauke
The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: ignore the last page on bcma based SoCshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: Fix reading sprom from nvram without a prefixhauke
The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30[brcm47xx]: improve the check for the memory sizehauke
This will hopefully fix bug #9360 and #9097 in trunk. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20[brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCshauke
When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update fix-boot patch.hauke
Do not change the code any more but use the kconfig options git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update gpio patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18[brcm47xx] make brcm47xx build only with bcma or only with ssb support.hauke
There are some ifdefs missing so when only ssb or only bcma was selected in the kernel config it did not build. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-18[brcm47xx] update gpio patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05[brcm47xx] update tg3 driverhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05brcm47xx: update gpio patchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05brcm47xx: fix patch which moves the flash struct in wgt634u codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04brcm47xx: use libgpio instaed of implementing the gpio interface ourself.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25brcm47xx: reorder patches so that the patches already in mainline linux will ↵hauke
be applied at first. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-11kernel: bcma: update to version from wireless-testing tag master-2012-07-11hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-02kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-16kernel: replace the brcm47xx fuse workaround patches with a generic patch ↵nbd
that applies to all mips targets The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18brcm47xx: fix nvram read out on devices with serial flashhauke
detect nvram on Linksys E3200 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18brcm47xx: bcma: fix null pointerhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18brcm47xx: ssb: recognize ARM Cortex M3hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18brcm47xx: some fixes for the USB driverhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17kernel: ssb/bcma: update to version from wireless-testing tag ↵hauke
master-2012-05-16-2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14kernel: update linux 3.3 to 3.3.6juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12brcm47xx: fix tg3 ssb patchhauke
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06brcm47xx: add gpio_request_one()hauke
This fixes a compile error with kernel 3.3. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-03brcm47xx: add support for kernel 3.3hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31573 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 23:32:29 +0000