summaryrefslogtreecommitdiff
path: root/target/linux/brcm-2.4
AgeCommit message (Collapse)Author
2009-12-24add WRT300N v1.1 support (patch from #6379)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-05[brcm-2.4] fix typo in switch config migration scriptjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-15[brcm-2.4] add migration code to automatically convert old to new switch ↵jow
config on first boot, this will be removed at some point in the future git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-15[brcm-2.4] change switch config to swconfig style format to remain ↵jow
consistent accross platforms git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-13[brcm47xx] fix problem with 128MB ram.hauke
This patch is out of broadcoms official source code git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11sort all target config fileskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-01[brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel ↵agb
Gimpelevich git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29make etehrent work on wrt350n, thx sn9blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)nbd
Signed-off-by: Roger Hardiman <roger@rjh.org.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-03brcm-2.4 is the only non-2.6 target, it's pointless to note the ↵kaloz
kernelversion in other targets' Target-Name git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-01[brcm-2.4] update profile to include the rtc driverflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27[brcm-2.4] add support for the WRT160N, patch from Westley Paynterflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14[brcm-2.4] This patch adds some vital exports for fuse24 to the kernel. ↵hauke
(forgotten in #5186) Closes #5333 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28[brcm-2.4] update to 2.4.37, tested on wrt54gs (#4766)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28brcm-2.4: disable ip_vs, refresh kernel confignbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-20[brcm-2.4] profiles: madwifi is not supported on 2.4, remove atheros profileagb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-27brcm-2.4: rip out all /dev/nvram and nvram setting/committing code from the ↵nbd
kernel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-04rename our /bin/login script to /bin/login.sh to avoid collisions with ↵nbd
busybox - we always use -l on telnetd anyway git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-26[brcm-2.4] move the mii_ioctl to generic patches, fixes (#1802)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-15[brcm-2.4] backport mii_ioctl_data fix to make wpa-supplicant roboswitch ↵florian
driver work (#1862) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22Asus WL-330gE Supportnbd
Here is support for the compact Asus WL-330gE. It uses that all-in-one 5354 Broadcom chip that's also in the WL-520gU, so I assume USB support can be soldered on. I've yet to open up the device, though. Initial flashing is done through the CFE failsafe mode like on other Asus devices, where you boot holding the reset button, the power LED flashes, and you tftp an image. Signed-off-by: David Cooper <dave@kupesoft.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-10fix a memory corruption bug in the linux 2.4 version of b44nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-09b44: fix misalignment and space-saving in rx packet handling (significant ↵nbd
throughput and cpu load improvement) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-07make broadcom-wl robust against implicit kernel config changes (e.g. ↵nbd
netfilter), upgrade it from minor version .2 to .3 (adds fixed bssid support for ad-hoc) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-02Add hostapd-mini to default images where applicableagb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-23fix sysupgrade support for brcm-2.4 and brcm47xxnbd
make mtd refresh based config append optional (leave enabled on x86) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-02final fix for BCM5354 USB cores, hopefullykaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-11Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26[brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network ↵juhosg
configuration (closes #2788) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-22fix sierra patchesthepeople
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz,thepeople
re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.). Changes from Linksys tree: - Remove 'vendor' and 'product' parameters; these aren't used in the mainstream driver and seem to only have served to break it. - Remove bogus 'sierra_device_ids' table, used with above. - Changed references to 'sierra_device_ids' back to id_table - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS - Added #include to enable pl2303 hack to remain until I can figure out if it's still necessary. Signed-off-by: RB <aoz.syn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21This series of patches closes the support gap on one of the explicitlythepeople
supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(5/6) bcm57xx: bcm4785 incomplete rebootnbd
I noticed my wrt350n would not reliably reboot after entering the reboot command. I found this code in the source for the wrt600n. It corrects the problem, and the wrt350n reboots reliably now. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(3/6) bcm57xx: preinitnbd
This patch allows the bcm57xx module to work correctly with failsafe mode. insmod doesn't return an error when a module loads but doesn't detect a switch. I added the check_module function to load the module, then make sure it doesn't just exit immediately. This allows preinit to only attempt to load the bcm57xx module when switch-robo and switch-adm dont detect a switch. The activate_gpio parameter to bcm57xx simply instructs the module to attempt to activate the switch via gpio before probing for the switch. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(2/6) bcm57xx: netconfignbd
Update the netconfig script to support boardtype 0x478. I've tested this on the wrt350n, hopefully it will match the 600n as well. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-03[brcm-2.4 and brcm47xx] Include missing part of r11275. Fix fw_argX from CFEnoz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-27Don't nuke fw_argX from CFE - Thanks jhansennoz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-19[brcm-2.4] refresh kernel patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-08This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben ↵thepeople
Pfountz <netprince@vt.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31Add a generic Broadcom USB profile.agb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31Change WL500gP profile to use uhci-iv (#1589)agb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31Add support for the WL-500gP v2agb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-16add wrt350n image filenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-08Add back Sitecom WL-105b supportflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update ↵nbd
broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-03bump version numbers of Linksys imageskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Add bcm5354 patch from #2754florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16create broadcom initramfs images and move the lzma decompressor area a bit ↵nbd
further git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10make the image filenames a bit shorternbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 13:30:57 +0000