summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
AgeCommit message (Collapse)Author
2013-09-20ar71xx: set proper wan mac during initial configuration on dir-825-c1juhosg
The goal is to set the WAN MAC address to the one on the sticker on the bottom of the unit. Currently it is not used at all. But some users expect the WAN interface to have the MAC address that is written on the sticker. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: tew-712br: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: tew-673gru: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-825-c1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-825-b1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-505-a1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: rename ath79_parse_mac_addr to ath79_parse_ascii_macjuhosg
Rename the function and extend it in order to make it usable from board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: fix Cameo934x initramfs image generationjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add profile and build image for the WD My Net N600 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add sysupgrade support for the WD My Net N600 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add user-space support for the WD My Net N600 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for the WD My Net N600 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: wndr4300: enable HW ECC mode for the NAND controllerjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add ath79_nfc_set_ecc_mode helperjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: ar934x_nfc: add experimental support for hardware ECCjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: ar934x_nfc: return error code from some low-level functionsjuhosg
Change some flow-level unctions to return with an error code in order to be able to report errors to the core code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: ar934x_nfc: use devm_* functionsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add profile and build image for the TL-MR13U boardjuhosg
Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4063/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add user-space support for the TL-MR13U boardjuhosg
Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4063/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for TP-Link TL-MR13Ujuhosg
This patch adds support for TP-Link TL-MR13U router with built-in 10AH rechargeable battery. The patch is based on kamwanlai's patch: https://forum.openwrt.org/viewtopic.php?pid=206746#p206746 Updated to accommodate recent changes introduced with: ar71xx: remove fs_* variables from image/Makefile Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4063/ [juhosg: - refresh and rename rename 930-add-tl-mr13u-support.patch => 625-MIPS-ath79-add-tl-mr13u-support.patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: wnr2200: fix a typo in a LED namejuhosg
Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add profile and build image for the WNR2200 boardjuhosg
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com> Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4055/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add user-space support for the WNR2200 boardjuhosg
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com> Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4055/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for Netgear WNR2200 wireless routerjuhosg
This patch adds OpenWRT support for the Netgear WNR2200 (N300) wireless router with USB. Technical details of this router can be found at http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx and http://wikidevi.com/wiki/Netgear_WNR2200 Signed-off-by: Aidan Kissane <aidankissane@googlemail.com> Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4055/ [juhosg: - add commit message and SoB line from the original patch - remove dead code from mach-wnr2200.c - refresh 624-MIPS-ath79-WNR2200-support.patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel/3.10: add new Kconfig option for firmware partition splitjuhosg
Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15kernel: update 3.10 to 3.10.12juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add support for TL-MR3040 v2juhosg
This patch adds support for building firmware images for the TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add wireless bgn led support for dir-825-c1juhosg
I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ar71xx: use the lzma loader for the WRT160NLjuhosg
Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03ar71xx: fix NetGear initramfs image namesjuhosg
The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: reorder Image/Build/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify more oneliner macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner loader macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner initramfs macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner buildkernel macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: optimize kernel generationjuhosg
When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: dynamically generate Image/Build/Template/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2juhosg
It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: remove fs_* variables from image/Makefilejuhosg
Those are not needed since we are generating the initramfs images along with the others. Remove the variables and use the template names directly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: fix initramfs image generation for Cameo933x profilesjuhosg
Initramfs images are not generated for profiles which are using the squashfs-only template. Add the missing 'Image/Build/Template/squashfs-only/initramfs' to fix that. Also, 'Image/Build/Cameo933x/initramfs' uses wrong parameters for 'MkuImageLzma/initramfs' due to a misplaced commma. Remove that to fix the generated initramfs images. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: add some pending patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: don't hardwire cpu_has_dsp{,2} to zerojuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: don't register USB device on WNDAP360juhosg
Apparently registering usb device on newest trunk causes this AP not to boot... Since there is no USB socket in that device anyway this can be simply removed (and device boots then no problem). [juhosg: - tweak subject line and description, - remove #include "dev-usb.h", - remove 'select ATH79_DEV_USB' from Kconfig] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24ar71xx: build factory image for DIR-505 A1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24ar71xx: allow to override kernel size in the CameoHornet profilejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel: update 3.10 to 3.10.9juhosg
Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15ar71xx: add support for hornet-ub-x2luka
The hornet-ub-x2 is hornet-ub variant with double more flash and ram. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14ar71xx: fix TL-WR710N board detectionblogic
Fix for recognize TL-WR710N http://patchwork.openwrt.org/patch/3946/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37782 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 13:24:36 +0000