summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
AgeCommit message (Collapse)Author
2010-11-12ar71xx: fix trailing statements locationjuhosg
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12ar71xx: fix whitespaces nitsjuhosg
(build error has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-10linux/ar71xx: add preliminary 2.6.37 kernel supportacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06[ar71xx] Add support for Ubiquiti UniFi APclaudio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: Configure WNDR3700 switch LED colors properly (#8103)nbd
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on ↵nbd
submitter's request git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)nbd
Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: Set eth1 MAC address from EEPROM for WNDR3700nbd
The WNDR3700's art/caldata partition contains three MAC addresses at offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1, respectively. The existing code configures eth1's MAC address by adding 1 to eth0's instead of using the value stored in the EEPROM. This patch causes the stored value to be used directly. (On my WNDR3700s, the three stored addresses are all sequential anyway.) Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: fix the wndr3700 antenna group setting for the first wireless chip ↵nbd
(thx, Mark Mentovai) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04update kernels to 2.6.32.25 and 2.6.35.8kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and ↵nbd
instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-22ar71xx: remove some unnecessary patchesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21move a few more 2.6.36 config options from ar71xx to genericnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: the ar7240 dsa driver is no longer used, remove it.nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: use the new ar7240 switch driver for tl-wa901nd as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: fix more section mismatchesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port ↵nbd
patch to the 2.6.36 patches, add a backport patch to 2.6.32 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: refresh kernel config for 2.6.36nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21ar71xx: remove unused kernel versions, 2.6.36 should be the next targetnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14[ar71xx] remove remaining references to dev-ap91-eth.h, patch by Stijn Tinteljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵nbd
switch driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-08linux/ar71xx: workaround an rb4xx hard-lock until we get a proper fix.acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-08linux/ar71xx: (2.6.36) add a missed patchacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-08linux/ar71xx: add preliminary 2.6.36 kernel support (refresh patches)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-07ar71xx: increase rb4xx nand kernel partition size (patch by danimo)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04[kernel]: upgrade kernel versions to the latest stable oneskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01ar71xx: initial support for jjPlus JWAP003juhosg
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-28AP96: Fix LAN/WAN setupnbd
LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: build firmware image for the TL-MR3420 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: add support for the TL-MR3420 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: AR724[12] requires different USB setupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: build firmware image for the TL-WR841N v7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: use the MDIO interface of the 2nd MAC on the ar7241juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: move ath9k specific PCI fixup into a separate filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCsjuhosg
With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27Add support for Atheros AP96 reference boardnbd
This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-05ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not ↵nbd
select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03ar71xx: build firmware images for the Zcomax boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-31ar71xx: refresh patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-31ar71xx: rewrite SPI drivers for the RB4xx boardsjuhosg
* add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-25ar71xx: refresh patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-22[kernel] update to 2.6.32.20florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-18ar71xx: don't override CONFIG_SWAPjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-18ar71xx: change mac address initializationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16ar71xx: add a new driver for the ar7240 switch using swconfig.nbd
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14ar71xx: add eap7660d board to diag.sh and sysupgradejuhosg
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-13[ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after ↵jow
sysupgrade on devices using the RTL8366s switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 02:49:53 +0000