summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
AgeCommit message (Collapse)Author
2014-04-13ar71xx: add profile and build image for the ZyXEL NBG6716 boardjuhosg
Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: remove the non-existing zyxelnand subtarget specific stuff] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add user-space support for the ZyXEL NBG6716 boardjuhosg
Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add kernel support for ZyXEL NBG 6716juhosg
With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: build firmware image for the WNDR3700 v4 boardjuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx/image: allow to use more arguments for some macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesjuhosg
Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: enable 5V power for the USB portjuhosg
The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonjuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add default LED config for WiFi LEDs on the WNDR4300juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: add LED for 2.4Ghz wifi interfacejuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOsjuhosg
The bootloader does not initializes the output function correctly for all LEDs. DO that from the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesjuhosg
The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: fix typos in TP-Link rssileds definitionjuhosg
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add rssileds for Ubiquiti XM boardsjuhosg
Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12kernel: update 3.10 to 3.10.36juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: fix image generationjuhosg
Move the comments out from the shell script to fix build breakage introduced in r40464. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: avoid spurious restarts caused by the watchdog on AR934xjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add comments for image Makefile.juhosg
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5075/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: initial support for TP-Link Archer C7v2juhosg
The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07ar71xx: move some always-used led related functionality from kmod packages ↵nbd
to the kernel image Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07/lib/functions.sh: move rarely used mtd and macaddr related functions to ↵nbd
/lib/functions/system.sh Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07ar71xx: add support for the TP-LINK TL-WR841N/ND v9nbd
Everything seems to be working fine. Potential issues: * VLAN port IDs are reversed with regard to the numbers on the case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07ar71xx: add support for QCA953x SoCnbd
I don't have access to the specs, so I'm not sure about every detail, but I haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty much like a QCA955x without PCI, a little twist in the clock calculation and a AR9331-compatible switch. Features not yet supported: * EHCI (my test system doesn't have USB) * ? (I have no idea if the QCA953x has any other features I don't know about that aren't used by the TL-WR841N v9) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27kernel: update 3.10 to 3.10.34juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27ar71xx: build image for TL-WDR4300v1 (IL)juhosg
The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27ar71xx: add profile and build firmware image for the Oolite v1 boardjuhosg
Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27ar71xx: add user space support for the Oolite v1 boardjuhosg
Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: use correct board name in uci-defaults/02_network] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27ar71xx: add kernel support for the Oolite v1 boardjuhosg
Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: - use a separate patch for kernel changes, - reorder Kconfig and Makefile entries, - change function and variable names to be lowercase only and fix misaligned tabs in mach-gs-oolite.c, ... ] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27ar71xx: rename RB951Ui specific kernel patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-12ar71xx: rb95x: use correct SPI flash addressjuhosg
The flash address passed to rb_init_info() is bogus, use the predefined AR71XX_SPI_BASE macro instead. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-12ar71xx: ar934x_nfc: fix memory initialization bugjuhosg
sizeof(array_from_function_definition) gives back the size of the pointer. sizeof(type) * array_size should be used in memset. Signed-off-by: David Völgyes <david.volgyes@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4950/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-28ar71xx: Add 16MB Flash version for Embedded Wireless Dorin Platformnbd
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-28ar71xx: adjust ew-dorin platform for LAN+WAN setupnbd
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-25ar71xx: fix failsafe acces on several devicesjuhosg
The ar71xx platform always uses the eth0 interface to provide access to the device in failsafe mode. Due to this, failsafe access is broken on devices where the LAN ports are connected to the 'eth1' interface. Update the relevant script to correctly set the ifname variable for these devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23kernel: update 3.10 to 3.10.32juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: define status LED for the RB91x boardsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x: register GPIO LEDsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x: add SPI device for the serial shift registerjuhosg
The RB91x boards are using a serial shift register connected to the SPI bus to drive some of the LEDs. Rework the board setup code to register a SPI device for that. This makes it possible to use the 'spi-74x164' driver to control the device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx/mikrotik: enable the 74x164 GPIO driverjuhosg
That will be used to drive the 74HC595 serial-in/parallel-out 8-bits shift register which can be found on some RouterBOARDs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: improve platform device support in the gpio-74x164 driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x-nand: rewrite to use GPIO APIjuhosg
Rewrite tha rb91x-nand driver to use GPIO API to modify the NAND control lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: rb91x: register a gpio-latch platform devicejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx/mikrotik: enable the GPIO latch driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: add a generic GPIO latch driverjuhosg
It will be used for the Mikrotik boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx/mikrotik: enable small sector erase in the m25p80 driverjuhosg
The serial flash devices used on the ROuterBOARDs are supporting 4KiB erase blocks. Enable the small sector erase option in the m25p80 driver to avoid superfluous erase/write of adjacent blocks. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: spi-ath79: fix initial GPIO CS line setupjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: refresh unaligned access hacks patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossjuhosg
When the RB91x device uses a GbE link the connection suffers from packet loss: root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 20 packets transmitted, 9 packets received, 55% packet loss round-trip min/avg/max = 4.570/4.815/4.999 ms Using a different PLL value fixes the issue. root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 4.449/5.413/13.870 ms Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: Add support for MikroTik RB951Ui-2HnDjuhosg
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39637 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 13:13:56 +0000