summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
AgeCommit message (Collapse)Author
2011-11-01ar71xx: combine LEDs setup in one filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx: unify LED names on Planex boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx: unify LED names on Buffalo boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx: unify LED names on TP-Link boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx/all0258n: sysupgrade supportjuhosg
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be stored in the U-Boot environment. If the checksums don't match during boot, a failsafe-system is booted instead. This patch adds a board-specific sysupgrade hack for the all0258n which calculates and updates the checksums for the U-Boot environment. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx/all0258n: add default configjuhosg
This adds default network and uboot-env settings for the ALL0258N. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx: remove default network config of the mzk-w04nu board as welljuhosg
It works with the generic config. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-31ar71xx: remove LED setup of nonexistent interfaces on RB750juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-31ar71xx: remove default network config of the wnr2000 boardjuhosg
It is the same as the generic configuration. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a ↵juhosg
32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx: fix typos in image/Makefilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx: add initial support for the OpenMesh OM2P boardjuhosg
Based on a patch by Marek Lindner <marek@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx/all0258n: fix partition layoutjuhosg
A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26ar71xx: create image for the WNDR3800juhosg
This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: build image for the Buffalo WHR-HP-G300Njuhosg
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: Buffalo WHR-HP-G300N kernel supportjuhosg
The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: build image for the Allnet ALL0258N boardjuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: add kernel support for the Allnet ALL0258N boardjuhosg
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: don't override CONFIG_FSNOTIFYjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24[ar71xx] base-files: make sure inittab-console-fixup returns with success ↵jow
(#10275) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11linux: ar71xx: add support for Mikrotik Routerboard RB493Gjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11ar71xx: add a workaround for ar8316 not always driving the TA bit to lowjogo
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-08ag71xx: close a race between the phy state machine and link statejogo
A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23ar71xx: fix MAC addresses on the DIR-825-B1 boardjuhosg
Patch-by: Lukas Kuna git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23ar71xx: enable login only on the system console by defaultjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: build images for the TP-Link TL-WR703N v1 boardjuhosg
Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add support for the TP-Link TL-WR703N v1 boardjuhosg
Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add AR933x specific USB setup functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add ar71xx_device_reset_rmw helperjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: fix copy&paste bug in WZRHPAG300H profile descriptionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: remove 'default [yn]' from machine Kconfig entriesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: sort AR71XX_MACH_* entriesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: create image for the TP-Link TL-WR743ND v1juhosg
Same hardware as WR741ND but with PoE support. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: create image for the TP-Link TL-WR740N v3juhosg
Signed-off-by: Martin Raykov <martin.raykov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-11ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-06ar71xx: do not count normal interrupts as spurious (fixes #10037)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-05ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes ↵nbd
#9954) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-29ar71xx: fix ethernet PLL setting on ar7242nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-16kernel: update kernel to version 2.6.39.4hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-13ar71xx: add some code to detect DMA stuck conditions on ar7240nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-13ar71xx: on ar724x only reset the link status in the restart handler, the ↵nbd
fast reset takes care of DMA stuck issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-11ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image ↵nbd
layout (fixes #9922) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-10ar71xx: make ehci patch apply againjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-10ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h ↵nbd
images (#9918) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-05ar71xx: fix image generationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04ar71xx: enable sysupgrade on the AP96 and DB120 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04ar71xx: use the same test for AP121 and Zcomax sysupgrade imagesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04ar71xx: cleanup image generation Makefilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04ar71xx: fix ethernet FIFO state corruption on ar7240nbd
When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04ag71xx: fix memory corruption issues on ar7240 on ethernet start/stopnbd
When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 20:21:07 +0000