index
:
openwrt.git
fast2504n-3.10.17
fast2504n-3.10.26
fast2504n-3.8
master
OpenWRT with patches for F@ST2504n board
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
target
/
linux
/
ar71xx
Age
Commit message (
Expand
)
Author
2010-03-08
ar71xx: simplify WP543 image generation, and fix rootfs offset
juhosg
2010-03-08
ar71xx: sync .33 config
juhosg
2010-03-08
ar71xx: enable AR7240 DSA driver on 2.6.33 as well
juhosg
2010-03-08
ar71xx: refresh patches
juhosg
2010-03-08
ar71xx: add NAND driver for the RB750
juhosg
2010-03-08
ar71xx: add ar71xx_gpio_function_setup
juhosg
2010-03-08
ar71xx: add LED driver for the RB750
juhosg
2010-03-08
ar71xx: add latch handling code for the RB750
juhosg
2010-03-08
ar71xx: increase kernel partition size for the WP543 boards
juhosg
2010-03-07
ar71xx: add preliminary support for the RouterBOARD 750
juhosg
2010-03-07
ar71xx: make the rb4xx nand driver depends on AR71XX_MACH_RB4XX
juhosg
2010-03-07
ar71xx: rename mach-rb-4xx.c to mach-rb4xx.c, and change Kconfig symbol
juhosg
2010-03-05
ar71xx: don't init PCI irqs on the AR7240 if the PCIe subsystem are in reset
juhosg
2010-03-05
ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
juhosg
2010-03-05
ar71xx: fix status led detection on the RB4xx boards
juhosg
2010-03-05
ar71xx: ag71xx: move calling ag71xx_phy_stop out from spinlock
juhosg
2010-03-05
ar71xx: ag71xx: move link update function
juhosg
2010-03-05
ar71xx: ag71xx: don't use dev->trans_start
juhosg
2010-03-05
ar71xx: ag71xx: use dma_unmap_single to unmap frames
juhosg
2010-03-03
ar71xx: restore command line on 2.6.33
juhosg
2010-03-03
ar71xx: sync 2.6.33 config
juhosg
2010-03-03
ar71xx: refresh 2.6.33 patches
juhosg
2010-03-02
ar71xx: ag71xx: use correct device pointer for dma_map_single
juhosg
2010-03-02
ar71xx: ag71xx: don't use virt_to_phys
juhosg
2010-03-02
ar71xx: ag71xx: simplify register access functions
juhosg
2010-03-02
ar71xx: ag71xx: use NETDEV_TX_OK
juhosg
2010-03-02
ar71xx: use COMMAND_LINE_SIZE
juhosg
2010-03-01
ar71xx: add default network configuration file for the TL-WR741ND board
juhosg
2010-03-01
ar71xx: add default network configuration file for the DIR-600 rev. A1 board
juhosg
2010-03-01
ar71xx: register DSA switch for the AP91 based boards
juhosg
2010-03-01
ar71xx: add DSA driver for the AR7240 built-in ethernet switch
juhosg
2010-03-01
ar71xx: add QinQ tagging format for the DSA driver
juhosg
2010-02-28
ar71xx: 2.6.33 patches
matteo
2010-02-28
kernel: update to kernel 2.6.32.9
hauke
2010-02-24
ar71xx: select vsc73x5 microcode in the AP83/PB44 profiles
juhosg
2010-02-24
ar71xx: refresh ksz8041 patch
juhosg
2010-02-24
ar71xx: add default network configuration file for the TL-WR1043ND board
juhosg
2010-02-24
ar71xx: register RTL8366RB switch on the TL-WR1043NB board
juhosg
2010-02-24
ar71xx: enable the RTL8366RB driver
juhosg
2010-02-24
ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND board
juhosg
2010-02-24
ar71xx: remove an accidentally committed patch
juhosg
2010-02-24
ar71xx: enable TX/RX flow control on the AR7240
juhosg
2010-02-24
ar71xx: use the correct name for the status LED on the WRT400 board
juhosg
2010-02-24
ar71xx: update default network configuration file for the WNDR3700
juhosg
2010-02-19
ar71xx: fix mac addresses on the DIR-600 rev. A1 board
juhosg
2010-02-19
ar71xx: fix wireless mac address on the TL-WR741ND
juhosg
2010-02-19
ar71xx: move AP91 specific ethernet initialization into a separate file
juhosg
2010-02-19
ar71xx: create firmware images for the TL-WR941ND v4 board
juhosg
2010-02-19
ar71xx: sync kernel config
juhosg
2010-02-19
ar71xx: add uci configuration for the WAN LED on the WNDR3700
juhosg
[next]