summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/patches-3.3
AgeCommit message (Collapse)Author
2012-11-23ar71xx: set pad6 cfg for AR8327 on the AP136 boardjuhosg
Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20ar71xx: make rb750_nand driver compatible with 3.7juhosg
Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20ar71xx: make ar934x_nfc driver compatible with 3.7juhosg
Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20ar71xx: refresh rb4xx_nand patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20ar71xx: fix GPIO function selection for AR934xjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18ar71xx: add kernel support for the RB435G boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18ar71xx: add kernel support for the OpenMesh MR600 boardjuhosg
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13ar71xx: add support for the Ubiquiti UniFi AP-Outdoor devicejuhosg
[juhosg: - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches - wrap long lines in mach-ubnt-xm - remove default network config, set it from uci-defaults/network instead - remove user-space, and image generation stuff] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13ar71xx: add support for TP-Link TL-WA7510Njuhosg
It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13ar71xx: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ar71xx: nuke ath79_set_usb_power_gpio helperjuhosg
It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boardsjuhosg
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28ar71xx: remove NO_AUTOINCR flag from the NAND driversjuhosg
The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27ar71xx: ag71xx: fix build_skb arguments for 3.6juhosg
Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27ar71xx: add support for the Senao CAP4200AG boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27ar71xx: add ath79_wmac_disable_[25]ghz helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17ar71xx: merge machine support patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17ar71xx: add support for the OpenMesh OM2P-HS boardjuhosg
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04ar71xx: add support for the TL-WR841N/ND v8 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24ar71xx: use different machtype and setup for the TL-MR3040juhosg
Should fix #12211. Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18ar71xx: revert DIR-825-B1 wholeflash image support.juhosg
It should be implemmented in a cleaner way. This reverts the following commits: [ar71xx] dir-825-b1: Fix wholeflash images [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash" git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: register the NAND flash controller device on DB120juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash ↵cshore
(-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: add missing code for ar933x WMAC reset that was left out during the ↵nbd
ar71xx->ath79 migration, should fix wifi stability issues on ar933x git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13ar71xx: merge machine support patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13ar71xx: register the NAND controller device on the RB2011juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13ar71xx: add device registration code for the AR934x NAND flash controllerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12ar71xx: define NAND controller base address and register size for AR934X/QCA955xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10ar71xx: fix QCA955X_EHCI_SIZEjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add initial support for RB2011UAS-2HnDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: use routerboot_find_tag to find wlan data offset on RB751juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add RouterBoot related helper routinesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add preliminary support for Mikrotik RB2011Ljuhosg
This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: use the RLE library for RB751juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: add library code for RLE decodingjuhosg
It will be used for the MikroTik boards. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: refresh kernel patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must ↵cshore
first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27ar71xx: add support for the Allnet ALL0315N boardjuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ar71xx: add support for the TRENDnet TEW-712BR boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ar71xx: fix serial clock calculation on AR933xjuhosg
Closes #12031. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ar71xx: add ALL0305 board aliasjuhosg
For the pure convenience of having a correctly named image and system name in /proc/cpuinfo , until we can do that by having system names in DTS... Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ar71xx: add support for TP-Link TL-WDR3600juhosg
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has only two antennas. [juhosg: remove the custom machine type, change the board name instead] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: simplify misc IRQ handlingjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02ar71xx: fix AR934X_EHCI_SIZEjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 10:44:12 +0000