summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/image
AgeCommit message (Collapse)Author
2014-01-18[ar71xx]: generate images for the On Networks N150 (rebranded Netgear WNR612v2)kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-17ar71xx: enable images for WD My Net N750juhosg
Now that the switch works correctly we can enable the images for this board. Flashing from the factory firmware, the factory failsafe loader and sysupgrade was tested successfully. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4617/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: build image for the TP-Link TL-WA901ND v3 boardjuhosg
Based-on: http://patchwork.openwrt.org/patch/4507/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: build firmware image for the TL-WA801ND v2juhosg
Patch to add the profile for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4502/ [juhosg: change subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: image: unify CyberTAN macrosjuhosg
Make the Image/Build/CyberTAN macro more generic, and use simple wrappers for the GZIP/LZMA variants. This simplifies the Makefile a bit, and allows to build sysupgrade images for the devices which are using LZMA compressed uImages. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: image: fix CyberTAN sysupgrade imagesjuhosg
In the current sysupgrade images, the CRC32 value of the TRX header covers the whole rootfs data. Due to this, the CRC value should be changed during sysupgrade otherwise the bootloader refuses to load the image on the next boot. Change the image generation to create sysupgrade images where the CRC32 value covers the kernel data only. This allows to skip the 'fixtrx' step during sysupgrade on the target. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29ar71xx: build image for the TL-WR1043ND v2 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29ar71xx: add profile and build image for the Sitecom WLR-8100juhosg
- partitions on factory fw are a bit strange - unknown contained some strings in factory - unknown2 contains some atheros (2nd art ?) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4149/ [juhosg: edit commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: add profile for the WR842N/ND v2juhosg
Patch to add the profile for the TP-LINK WR842N/ND v2 Small update, because of a change in the Makefile. Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4382/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot ↵nbd
loader stop searching after the kernel partition Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderjuhosg
Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: build image for the WD My Net Wi-Fi Range Extenderjuhosg
Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: image: add EOF marker to the WNDR4300 UBI imagejuhosg
Append EOF markers to the END of the UBI image file. This forces the kernel to erase all blocks after the marker even if those blocks are not empty. Additionally, the resulting image can be flashed from the original web UI now, so use '-factory' suffix for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06ar71x: image: don't use the wndr3700 utilityjuhosg
Pass the uImage magic value directly to mkimage instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: image: fix WNDR4300 initramfs image generationjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: generate recovery image for WNDR4300juhosg
Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04ar71xx: move WNDR4300 profile to the nand subtargetjuhosg
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04ar71xx: image: dd root.* images in fs specific macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-01ar71xx: image: only define profiles for the generic subtargetjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-01ar71xx: image: add IMAGE_PROFILE variablejuhosg
Ensures that the 'Default' images are generated even if the subtarget has no profiles. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: don't build uImages for the mikrotik subtargetjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: add profile and build image for the BXU2000n-2 A1 boardjuhosg
Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - remove MultiProfile, it makes no sense for a single board - move SingleProfile call and the mtdlayout to a different location keep things sorted (well, almost)] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: add profile and build image for the Dragino2 boardjuhosg
Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: remove kernel+rootfs partition and use uimage split instead] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-11[ar71xx]: make the generated images actually flashable on the Unifi devices.kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25ar71xx: use correct board id for TL-MR3040 v2juhosg
Fix the image building code so that the kernel correctly distinguishes between hardware revisions. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: simplify mynet_n600_mtdlayoutjuhosg
Remove the kernel and rootfs partitions. The Seama parser can find those automatically: 0x000000070000-0x000000ff0000 : "firmware" 2 seama-fw partitions found on MTD device firmware 0x000000070000-0x0000001b0000 : "kernel" 0x0000001b0000-0x000000ff0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem 1 squashfs-split partitions found on MTD device rootfs 0x000000360000-0x000000ff0000 : "rootfs_data" 0x000000ff0000-0x000001000000 : "radiocfg" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: update the Image/Build/WZRHP macrojuhosg
- append the root squashfs directly after the kernel, - use the 64kraw/128kraw template instead of the 64k/128k, - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on WZR-HP-G300NH and WZR-600DHP boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: use a common macro for Buffalo WZRHP devicesjuhosg
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros are similar. Move the common stuff into the Image/Build/WZRHP macro and update the orignal macros to use that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: update Image/Build/CameoAP94 macrojuhosg
- append the root squashfs directly after the kernel, - use the 64kraw template instead of the 64k, - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on a TEW-673GRU board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: use a common macro for Cameo AP94 based devicesjuhosg
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros are identical. Merge those into a new Image/Build/CameoAP94 macro, and update the device profiles to use the new macro. Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: use the board name for temporary mtdpart filesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: update the Image/Build/UBNT2 macrojuhosg
- append the root squashfs directly after the kernel, - use the 64kraw template instead of the 64k, - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on a WispStation M5 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: build intramfs images for the Ubiquiti XM boardsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24ar71xx: image: use a common macro for UBNTXM/UBNTDEVjuhosg
The firmware generation part is the same for both macros. Move that into a separate macro and use the new macro for Image/Build/UB{NTXM,DEV}. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: update Image/Build/WHRHPG300N macrojuhosg
- append the root squashfs directly after the kernel, - use the 64kraw template instead of the 64k - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on the WHR-G301N board only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image use the 64kraw template for the TEW-732BR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: update Build/Image/Planex macrojuhosg
- remove the 'kernel' and 'rootfs' partitions from the mtd layout, - move the .okli image into the uImage, - append the root squashfs directly after the kernel, - use the 64kraw template instead of the 64k - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on the MZK-W300NH board only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: allow to build initramfs for Planex devicesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: build Planex kernels in a separate stepjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: add profile and build image for the TEW-732BR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: update the Image/Build/CameoHornet macrojuhosg
- append the root squashfs directly to the kernel, - use the 64kraw-nojffs template instead of sqashfs-only - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on a TEW-712BR devices only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: update the Image/Build/Cameo macrojuhosg
- append the root squashfs directly to the kernel, - use the 64kraw/64kraw-nojffs template instead of 64k/squashfs-only, - ensure, that the signature is placed at the correct offset in the *-factory images, - ensure that the generated images have enough erase blocks for JFFS2 garbage collection, Tested on DIR-600-A1 and TEW-632BR devices only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: add new macros for AP99 based Cameo devicesjuhosg
The MTD layout of the AP99 based devices is different. Add new macros to reflect that and use the new macros for the DIR-615-E4 board. This prevents overwriting of the 'mac' partition which contain vital informations. The disadvantage of the change is that the usable space is reduced by 192KiB. Blame the vendors for the unfriendly partition layout. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: image: rename the Cameo macrosjuhosg
Use the reference board name in the macro instead of the SoC number. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22ar71xx: image: add optional JFFS2 padding support to the CatFiles macrojuhosg
Also remove the similar code from the Netgear profile and use the new feature instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22ar71xx: image: remove too big files in the CatFiles macrojuhosg
Also improve the warning message. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22ar71xx: simplify wndr3700 image generationjuhosg
- remove the kernel and rootfs partitions from the mtd layout, the kernel creates those automatically, - remove estimation step, it is not needed anymore - put the root squashfs directly after the kernel - use the 64kraw template With the default configuration, this allows to use more space for rootfs_data with 64KiB. Tested on WNDR3700 v1 only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22ar71xx: image: add mtdpartsize macrojuhosg
The new macro will be used to determine the firmware partition size from an MTD layout. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22ar71xx: image: improve the rootfs_align macrojuhosg
Improve the macro to return correct value for all squashfs variant. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38116 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-28 20:09:15 +0000