summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files
AgeCommit message (Collapse)Author
2010-10-07ar71xx: increase rb4xx nand kernel partition size (patch by danimo)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01ar71xx: initial support for jjPlus JWAP003juhosg
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-28AP96: Fix LAN/WAN setupnbd
LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: add support for the TL-MR3420 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: AR724[12] requires different USB setupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: use the MDIO interface of the 2nd MAC on the ar7241juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: move ath9k specific PCI fixup into a separate filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCsjuhosg
With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27Add support for Atheros AP96 reference boardnbd
This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-05ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not ↵nbd
select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-31ar71xx: rewrite SPI drivers for the RB4xx boardsjuhosg
* add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-18ar71xx: change mac address initializationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16ar71xx: add a new driver for the ar7240 switch using swconfig.nbd
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-27ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these ↵nbd
values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵nbd
"Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-20ar71xx: set default values for the fifo cfg registers on AR724xnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15generic: move ath5k_platform.h from ar71xx to generic filesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ar71xx: in-flash macs and eeprom for mach-eap7660djuhosg
This adds in-flash mac-addresses and calibration data for the Senao EAP7660D board. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-06ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until ↵nbd
we've figured out what part of it causes the issue described in #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-04ag71xx: reset the hardware during open(), this improves recovery from tx ↵nbd
timeouts on ar724x considerably git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-04ag71xx: fix a memory corruption bug that happens if you flood the interface ↵nbd
with packets while it's being brought down fixes boot time crashes under load reported by matteo git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01ar71xx: fix leds-rb750 build failure on 2.6.34juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18ar71xx: add support for the Senao EAP7660D boardjuhosg
This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14ar71xx: avoid duplicated 'board' parameter in kernel command linejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtypejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-09ar71xx: fix phy_mask for the RB450juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-09ar71xx: fix build error in the rb{4xx,750}_nand drivers on 2.6.34/35juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08ar71xx: fix phy_mask on the RB433 for the IP17xx driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-07ar71xx: fix 2.6.34 build errorsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14ar71xx: fix nbg460n mtd partitionsjuhosg
This fixes the NBG460N/550N/550NH mtd partitions. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26ar71xx: remove config partition from the mtd map on the MZK-W300NH boardjuhosg
This space can be used to extend the rootfs_data partition. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26ar71xx: fix firmware partition size on the MZK-W04NU boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26ag71xx: remove rx alignment code for small packets, it seems to break ipv6 ↵nbd
for some reason (fixes #7236) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24ar71xx: fix a wifi card stability issuenbd
when we receive a pci/ahb interrupt, we need to flush pending data for dma from the device, otherwise the tx path may get stuck if the completion flag of the dma descriptor is not updated at the time the tx interrupt arrives. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21ar71xx: reduce button threshold value on the NBG460 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18ar71xx: adding support for zyxel nbg460n/550n/550nh boardsjuhosg
This patch adds support for the zyxel nbg460n/550n/550nh routers. Currently this only works if a second stage bootloader is also flashed, as the used switch needs extra initialization. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15ar71xx: fix up alignment handlingnbd
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09ar71xx: update phy masks for the Planex boardsjuhosg
This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boardsjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive ↵juhosg
functions Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09ar71xx: ag71xx: call the phy driver's netif_receive_skb()juhosg
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers to mangle rx packets. This patch fixes it. This fixes the header mangling of the AR8216 driver. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> Cc:backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-06ar71xx: fix ethernet on final pb92 board (previous value was based on a ↵nbd
preliminary version) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05[PATCH 1/2] Add support for the ar8316 switch.jow
This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024)juhosg
* cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28ar71xx: fix pci on ar7241/ar7242nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28ar71xx: fix the wan port on pb92nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28ar71xx: reset the mdio bus on ar7241/ar7242nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27ar71xx: update image generation and trx header parsing for the WRT160NLjuhosg
* patch by Bernhard Loos * note: trailing whitespaces has been removed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 07:25:48 +0000