summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files
AgeCommit message (Collapse)Author
2012-03-15ar71xx: move micrel PHY driver to the generic linux targetjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13ar71xx: ag71xx: fix ARP frame reception on AR934x switch portsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13ar71xx: ag71xx: start aneg on switch PHYs after resetjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13ar71xx: ag71xx: poll PHY status of all available switch portsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13ar71xx: reset the switch on AR934x before ethernet device registrationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12ar71xx: use a dummy callback for interfaces with fixed speedjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12ar71xx: merge ar934x_bo_ddr_flush patchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07ar71xx: fix WPS button polarity on TL-WR2543Njuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07ar71xx: ag71xx: fix get_port_link callbackjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-07ar71xx: ag71xx: use the generic get_port_link implementationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-01ar71xx: ag71xx: keep VLAN tags if VLAN is not enabledjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10ar71xx: ag71xx: add BQL supportjuhosg
It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10ar71xx: add preliminary support for 3.3juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10ar71xx: merge 3.2 fixesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-10ar71xx: merge files-3.2 to filesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: use dynamically allocated partitions in wrt160nl_partjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: move arch specific files to files-2.6.39juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: wrt160nl_part: include module.h and fix compiler warningsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: tplinkpart: include module.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: rename vsc7385 spi driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: rename ap81 spi driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: rename rb4xx spi driversjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: rename the nxp_74hc153 driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: change board id of the UniFi boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22ar71xx: include linux/module.h in the micrel phy driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: move irq_to_gpio and gpio_to_irq into gpio.cjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: pb44_spi: add shutdown handlerjuhosg
This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/removejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpersjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: ar71xx_spi: add shutdown handlerjuhosg
This allows to access the flash from a kexec'd kernel. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: ar71xx_spi: save and restore regs from probe/removejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11ar71xx: ar71xx_wdt: add shutdown handlerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07ar71xx: add initial support for the TL-WR2543N/ND boardjuhosg
The WLAN LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07ar71xx: local mac support on the wndr3700juhosg
The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06ar71xx: add support for Redwave RW2458Njuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05ar71xx: fix sections mismatch warnings in the nand driversjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add inital support for the ALFA Network AP96 boardjuhosg
The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: allow to use the command line hack on compex devicesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7juhosg
These models are based on the AP99 reference board, and uses the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add support for TP-Link TL-MR3020juhosg
This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01ar71xx: add support for the ALFA Network N2/N5 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: ag71xx: implement get_port_{link,stats} callbacksjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: fix LEDs on the WRT400Njuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22ar71xx: set a reserved bit that resets to 1 when writing the address table ↵nbd
control register on the ar7240 switch (should fix #10547) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach ↵jow
id of the WZR-HP-AG300H, correct the id (#10649) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19ar71xx: add missing wireless led changes for wzr-hp-g300nh2nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18ar71xx: add support for the wzr-hp-g300nh2nbd
Signed-off-by: Mark Deneen <mdeneen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 07:30:56 +0000