summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files/arch
AgeCommit message (Collapse)Author
2013-11-29ar71xx: add kernel support for the TL-WR1043ND v2 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29ar71xx: improve support for the My Net Wi-Fi Range Extender devicejuhosg
This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29ar71xx: Kernel support update tl-wr842n_v2 added missing usb ledjuhosg
Just a small oversight my part, added the support for the USB led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: Add kernel support for the WR842N/ND v2juhosg
Patch to add kernel support for the TP-LINK WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4352/ [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boardsjuhosg
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extenderjuhosg
Patch to add kernel support for the TP-LINK WA750RE and the WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: add kernel support for the My Net Wi-Fi Range Extender devicejuhosg
This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 boardjuhosg
BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip. Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - rename and refresh kernel patch, - fix some checkpatch warnings and adjust whitespaces in mach-bhu-bxu2000n2-a.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: add kernel support for the Sitecom WLR-8100 wireless routerjuhosg
- unsure about copyright message - based on AP136-010 Patchwork: http://patchwork.openwrt.org/patch/4147/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30ar71xx: add kernel support for DRAGINO2juhosg
This patch adds support for DRAGINO2 board (used by Meshpotato v2). Most of the files included can be found in the official svn repository provided by the company [1]. I have just adapt it to the last OpenWrt trunk revision (Fri Oct 4 10:49:47 2013). 1. http://svn.dragino.com/dragino2 Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: - rename and refresh kernel patch, - fix checkpatch warnings in mach-dragino2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-20ar71xx: fix WLAN 5 GHz LED init on dir-825-c1juhosg
Fixes the 5 GHz LED. The same function has no effect on the 2.4 GHz LED at all, so we might as well remove it. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25ar71xx: improve kernel support for the TL-MR3040 v2juhosg
This patch adds support for the hardware slide switch on the TL-MR3040 v2. Signed-off-by: Mads Hansen <d@taba.se> [juhosg: use EV_SW instead of EV_KEY] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23ar71xx: add kernel support for the TEW-732BR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: vanity changes for dir-825-c1juhosg
This patch - changes the color names from orange to amber - changes the name of GPIO 13 from WIFI_BGN (wifi_bgn) to WLAN_2G (wlan2g) to be more consistent with the other routers' files - changes the descriptions of the hardware keys to be a tad more explicit Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Patchwork: http://patchwork.openwrt.org/patch/4081/ [juhosg: update the LED migration script as well] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: use netgear prefix for WNDAP360 LED namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: use netgear prefix for WNR612 v2 LED namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: use netgear prefix for WNR2200 LED namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: use netgear prefix for WNR2000 LED namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: use netgear prefix for WNDR3700 LED namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: let HW switch control WAN LED on dir-825-c1juhosg
Enable GPIO 20. This hands off control of the blue planet led to the integrated switch. Consequently, remove the led configuration for the blue planet led. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Patchwork: http://patchwork.openwrt.org/patch/4080/ [juhosg: whitespace fixup] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21ar71xx: fix LAN LEDs for dir-825-c1juhosg
This patches fixes the lan led configuration. The new configuration is identical to the one in mach-db120.c and it works. The previous one didn't work at all. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: tew-712br: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: tew-673gru: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-825-c1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-825-b1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: dir-505-a1: use ath79_parse_ascii_mac helperjuhosg
Remove the local MAC address parser function and use the generic one instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20ar71xx: rename ath79_parse_mac_addr to ath79_parse_ascii_macjuhosg
Rename the function and extend it in order to make it usable from board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for the WD My Net N600 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: wndr4300: enable HW ECC mode for the NAND controllerjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add ath79_nfc_set_ecc_mode helperjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for TP-Link TL-MR13Ujuhosg
This patch adds support for TP-Link TL-MR13U router with built-in 10AH rechargeable battery. The patch is based on kamwanlai's patch: https://forum.openwrt.org/viewtopic.php?pid=206746#p206746 Updated to accommodate recent changes introduced with: ar71xx: remove fs_* variables from image/Makefile Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4063/ [juhosg: - refresh and rename rename 930-add-tl-mr13u-support.patch => 625-MIPS-ath79-add-tl-mr13u-support.patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: wnr2200: fix a typo in a LED namejuhosg
Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19ar71xx: add kernel support for Netgear WNR2200 wireless routerjuhosg
This patch adds OpenWRT support for the Netgear WNR2200 (N300) wireless router with USB. Technical details of this router can be found at http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx and http://wikidevi.com/wiki/Netgear_WNR2200 Signed-off-by: Aidan Kissane <aidankissane@googlemail.com> Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4055/ [juhosg: - add commit message and SoB line from the original patch - remove dead code from mach-wnr2200.c - refresh 624-MIPS-ath79-WNR2200-support.patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add wireless bgn led support for dir-825-c1juhosg
I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2juhosg
It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: don't register USB device on WNDAP360juhosg
Apparently registering usb device on newest trunk causes this AP not to boot... Since there is no USB socket in that device anyway this can be simply removed (and device boots then no problem). [juhosg: - tweak subject line and description, - remove #include "dev-usb.h", - remove 'select ATH79_DEV_USB' from Kconfig] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: add support for dir 505 a1blogic
this patch is based on ... -> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05ar71xx: fix tl-wa901nd buttons codejuhosg
This patch fixes the code of the buttons for TP-Link WA901ND. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28ar71xx: add kernel support for the Netgear WNR612 v2 boardjuhosg
Netgear WNR612 v2: - cpu Atheros AR7240 (Python) @400MHz - flash 4MB - ram 32MB - ethernet 10/100: 1xwan + 2xlan (only two) - radio AR9285 [juhosg: use a separate kernel patch] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3876/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28ar71xx: add kernel support for the TP-LINK TL-WR710N v1 boardjuhosg
Small router sold in EU: AR9330@400MHz, 1x USB2.0, 2x ethernet, 8MB flash, 32MB ram, one led, one button. See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/ [juhosg: use a separate kernel patch] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3873/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28ar71xx: TEW632BRP has buttons 'active low', fix board configjuhosg
Looks like trunk@37090 has changed the logic that determines if router's button was pressed. This resulted in TEW632BRP always booting into failsafe mode because it detected pressed button (which was not pressed). Measure with voltmeter has shown that buttons on this router are actually active-low. This patch reflects this fact in board configuration and fixes 'load info failsafe mode' issue. Note: it looks like Trendnet TEW632BRP and a close relative to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may exist on those routers as well. This patch doesn't affect routers other than 632BRP and unfortunately I do not have hardware to test this issue with other routers. This patch fixes #13893 and is tested on actuall Trendnet TEW632BRP. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26ar71xx: add kernel support for the TL-MR10U boardjuhosg
Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 [juhosg: extend WR703N code to handle the TL-MR10U instead of adding a separate mach-tl-mr10u file]] Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G300NH2nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhpnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G300NHnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14ar71xx: use uimage split for WZR-HP-G450Hnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11ar71xx: add carambola2 supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2juhosg
It also fixes USB Power on MR3420v2. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360juhosg
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button typeluka
switch buttons should be declared as switch so the failsafe shell is not triggered by accident in procd Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37131 3c298f89-4303-0410-b956-a3cf2f4a3e73