summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files
AgeCommit message (Collapse)Author
2010-12-10ar71xx: add nbg460n image generationjuhosg
This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use ↵jow
eth0.1 for the lan interface - this brings the configuration more in line with other switch setups git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: Configure WNDR3700 switch LED colors properly (#8103)nbd
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on ↵nbd
submitter's request git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)nbd
Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵nbd
switch driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01ar71xx: initial support for jjPlus JWAP003juhosg
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: add support for the TL-MR3420 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27Add support for Atheros AP96 reference boardnbd
This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16ar71xx: add a new driver for the ar7240 switch using swconfig.nbd
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14ar71xx: add eap7660d board to diag.sh and sysupgradejuhosg
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-14linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-13[ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after ↵jow
sysupgrade on devices using the RTL8366s switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-23ar71xx: fix sysupgrade on the ubnt nanostation mnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵nbd
"Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01[ar71xx] fix dir-825-b1 default network config after r21905jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26ar71xx: don't use vlan 0 for devices with rtl8366s switchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18ar71xx: add support for the Senao EAP7660D boardjuhosg
This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-17ar71xx: fix RB750 LED configurationjuhosg
Patch-by: Ray Bellis git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12ar71xx: add default network config for the RB433UAH boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08ar71xx: add default network configuration file for the RB450/RB433 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30ar71xx: Added preinit scriptlet to set vars based on cpuinfo during ↵cshore
preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14ar71xx: Make wget2nand fail if copying the kernel fails and use the correct ↵juhosg
file extension for the rootfs image wget2nand didnt check the exit status after copying the kernel, if the copying failed for some reason ( for example not enougs space on the kernel partition) it simply continued extracting the rootfs. I also changed the filename, which wget2nand trys to download ( .tar.gz instead of .tgz ). Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boardsjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05[PATCH 1/2] Add support for the ar8316 switch.jow
This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27ar71xx: add uci defaults to fix trx header on the WRT160NL boardsjuhosg
* patch by Otto Solares git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25ar71xx: Add basic WLAN LED control to TL-WR1043NDjuhosg
* thanks to KillaB * closes #6834 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15ar71xx: fix defconfig script to work with ImageBuilderjuhosg
* patch from #5722 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15ar71xx: don't break the existing network configuration in the wget2nand scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-10ar71xx: fix sysupgrade on the LS-SR71 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar71xx: add default network configuration for the PB44 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar71xx: add uci-defaults for the RB750 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar71xx: override lan port names on the RB750juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar71xx: improve wget2nand scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09ar71xx: add missing protocol definitions to default network configurationsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07ar71xx: add preliminary support for the RouterBOARD 750juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)juhosg
* closes #6782 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05ar71xx: fix status led detection on the RB4xx boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01ar71xx: add default network configuration file for the TL-WR741ND boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01ar71xx: add default network configuration file for the DIR-600 rev. A1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24ar71xx: add default network configuration file for the TL-WR1043ND boardjuhosg
Thanks to Andrew Tarabaras. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24ar71xx: use the correct name for the status LED on the WRT400 boardjuhosg
(thanks to chuljin, patch from #6734) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24ar71xx: update default network configuration file for the WNDR3700juhosg
Signed-off-by: Scott Dudley <spmsink@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19ar71xx: add uci configuration for the WAN LED on the WNDR3700juhosg
Based on a patch by Scott Dudley <spmsink@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28preinit: fix mixup between led and reset button enable on some platforms ↵nbd
(thx, cshore) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25add preinit modularization work by Daniel Dickinson (cshore)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22rtl8366_smi: move RTL8366S driver into a separate filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18ar71xx: change failsafe messagejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19221 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 09:38:23 +0000