summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files/lib/ar71xx.sh
AgeCommit message (Collapse)Author
2011-12-18ar71xx: add support for the wzr-hp-g300nh2nbd
Signed-off-by: Mark Deneen <mdeneen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14ar71xx: add support for ALFA Network's Hornet-UB boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2juhosg
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07ar71xx: fix WNDR3x00 model detectionjuhosg
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: add TP-Link board detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: verify hardware id of firmware images on TP-Link boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: add preliminary support for wzr-hp-g450hnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: rewrite WNDR3700/3800 handlingjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: change user-space board detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01ar71xx: add support for Ubiquiti AirRouterjuhosg
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24ar71xx: fix wndr3800 machine namejuhosg
This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12ar71xx: add diag support for the DB120 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: add support for the Buffalo WHR-HP-GN boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: add support for the Buffalo WHR-G301N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01ar71xx: add initial support for the TL-WR741ND v4 boardjuhosg
The ethernet port LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx: add initial support for the OpenMesh OM2P boardjuhosg
Based on a patch by Marek Lindner <marek@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: Buffalo WHR-HP-G300N kernel supportjuhosg
The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: add kernel support for the Allnet ALL0258N boardjuhosg
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11linux: ar71xx: add support for Mikrotik Routerboard RB493Gjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add support for the TP-Link TL-WR703N v1 boardjuhosg
Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NHjogo
Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25ar71xx: add default network config for wzr-hp-ag300h (based on a patch from ↵nbd
#9607) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31ar71xx: add default network config for the AP121 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28ar71xx: use the ar8316 switch driver on the PB92 board and add a matching ↵nbd
default network config git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12ar71xx: Add support for WZR-HP-G301NHjuhosg
Add support for the Buffalo WZR-HP-G301NH. The only difference between it and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S. Since we don't do runtime detection of the switch, we need a separate machine definition for it. While we are at it, also rename the profile to reflect that it now is for more than one device. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13ar71xx: add support for the TP-Link TL-WA901ND v2 boardjuhosg
Patch-by: Jonathan Benett <jbscience87@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ar71xx: add support for the WNDR3700v2 boardjuhosg
Based on a patch by Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-20[ar71xx] unifi: add sysupgrade and leds supportclaudio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10ar71xx: add support for the jjPlus JA79PFjuhosg
Patch-by: Cezary Jackiewicz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10ar71xx: add support for the TP-LINK TL-MR3220 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10ar71xx: add nbg460n image generationjuhosg
This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01ar71xx: initial support for jjPlus JWAP003juhosg
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ar71xx: add support for the TL-MR3420 v1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27Add support for Atheros AP96 reference boardnbd
This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵nbd
"Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18ar71xx: add support for the Senao EAP7660D boardjuhosg
This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07ar71xx: add preliminary support for the RouterBOARD 750juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05ar71xx: fix status led detection on the RB4xx boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15ar71xx: fix typos in the ar71xx.shjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15ar71xx: add preliminary support for the Buffalo WZR-HP-G300NHjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-11ar71xx: add support for the D-Link DIR-600 rev. A1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-22ar71xx: add support for the TL-WR841N v1.5 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-18ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on thejuhosg
patch from #6186) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08ar71xx: TL-WR1043ND support cleanupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03ar71xx: DIR-825 support cleanupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks tojuhosg
ValXdater) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28ar71xx: fix a typo in ar71xx.shjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-25ar71xx: enable failsafe on the Nanostation M/Rocket Mjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-13ar71xx: add preliminary support for the Netgear WNDR3700juhosg
Based on patches by Marco Porsch from: https://forum.openwrt.org/viewtopic.php?id=22311 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18411 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 22:21:36 +0000