summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files/etc
AgeCommit message (Collapse)Author
2012-02-08ar71xx: add support for the TRENDNet TEW-673GRU boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: fix ethernet LEDs on the DIR-600-A1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: unify LED names on D-Link boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: support for D-LINK DIR-615 rev. E4juhosg
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31ar71xx: add support for TP-Link TL-MR11Ujuhosg
Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28[ar71xx] add support for the Atheros AP113 reference boardflorian
This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26ar71xx: add support for Compex WPE72/WPE72NXjuhosg
This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵juhosg
modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24ar71xx: preset WLAN LED config on MZK-W300NHjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07ar71xx: add initial support for the TL-WR2543N/ND boardjuhosg
The WLAN LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06ar71xx: add support for Redwave RW2458Njuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06ar71xx: fix RB-750 network configurationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05ar71xx: fix LED configuration on the RB-750juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add inital support for the ALFA Network AP96 boardjuhosg
The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7juhosg
These models are based on the AP99 reference board, and uses the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: fix network configuration for the TL-WA901N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add default LED configuration for the TL-MR3020juhosg
Also use the system LED for diagnostic. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add support for TP-Link TL-MR3020juhosg
This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01ar71xx: add support for the ALFA Network N2/N5 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: fix LEDs on the WRT400Njuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450Hjogo
Thanks netprince for reporting and testing. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18ar71xx: add support for the wzr-hp-g300nh2nbd
Signed-off-by: Mark Deneen <mdeneen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15ar71xx: connect GMAC0 to the internal switch on DB120juhosg
Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14ar71xx: add support for ALFA Network's Hornet-UB boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05ar71xx: rewrite WNDR3700/3800 handlingjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05[ar71xx] add some missing wndr3800 base-files definitionsjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01ar71xx: add support for Ubiquiti AirRouterjuhosg
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01ar71xx: configure default led behavior for the OM2Pjuhosg
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01ar71xx: use /lib/functions/uci-defaults.shjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12ar71xx: add diag support for the DB120 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12ar71xx: generate ubootenv from uci-defaults instead of providing defconfigjuhosg
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create TL-WA901ND network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create ALL0258N network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create NBG{460N,550N,550NH} network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create WZR-HP-G300NH network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create RB-493G network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create TL-WR1043ND network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create WRT160NL network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create PB92 network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create DIR-825-B1 network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create RB-450 network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create RB-450G, RouterStation Pro network config from uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create RB-433{,U} network config from uci defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create even more network configs from the uci-defaults scriptjuhosg
Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create more network configs from the uci-defaults scriptjuhosg
Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07ar71xx: create a bunch of network configs from the uci-defaults scriptjuhosg
Create the default network configuration dynamically for the boards with a single ethernet interface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28818 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 15:26:53 +0000