summaryrefslogtreecommitdiff
path: root/target/linux/adm5120/files/arch
AgeCommit message (Collapse)Author
2009-02-08[adm5120] enable CAS-630/630W supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-02[adm5120] nfs-101u: add PCI IRQ map for the NEC USB controller (thanks to ↵juhosg
Daniel Schmitt for testing) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-13[adm5120] NFS-101U/WU: add PCI irq map and change vlan mapjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-06[adm5120] use mips_machine codejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-05[adm5120] experimental support for 2.6.27juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-13[adm5120] remove 2.6.25 specific stuffjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-13[adm5120] fix gpio number of the reset button Compex WP54 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-07[adm5120] add alternative board id for the ZyXEL P-334WTjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-05[adm5120] experimental gpiodev support (closes #3613)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-04[adm5120] add missing buttons device for RB-1xx boards, thanks to Christophe ↵juhosg
Lucas git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-28[adm5120] make use DMA_BIT_MASKjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26[adm5120] make boot quiet a bitjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-22[adm5120] use __raw_{readl,writel} routines in the GPIO codejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-17[adm5120] IRQ code cleanupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08[adm5120] add button devices to several boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-06[adm5120] make use the chip_fixup function of the plat_nand driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-01[adm5120] improve support of the Infineon EASY 5120-RT Reference Boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07[adm5120] fix a bug in the GPIO codejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-09[adm5120] switch to 2.6.24juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-30[adm5120] add preliminary support for 2.6.24juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-30[adm5120] don't use mips_machgroupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-29[adm5120] more license cleanupsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-29[adm5120] add experimental support for the Cellvision NFS-101U devicejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-29[adm5120] license cleanupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-25[adm5120] convert Cellvision board structuresjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-27[adm5120] use reset function on the NP28G boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-27[adm5120] change switch register access macrosjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-26[adm5120] fix compiler warningjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-17[adm5120] revert [9788], the ADM5120 datasheet v1.16 contains bad valuesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-17[adm5120] remove invalid GPIO definitions for the RB153juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-17[adm5120] fix level setup code for GPIO IRQsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-16[adm5120] add support for LEDs on the NP28G board, thanks to kenny (closes: ↵juhosg
#2825) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12[adm5120] use a shadow value for the write-only GPIO_CONF2 registerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12[adm5120] fix mac address setup on RouterBOARDsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11[adm5120] enable wait state pin for the CF slot on the RB153 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11[adm5120] new experimental driver for the CF slot on the RouterBOARD 153juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10[adm5120] add support for GPIO IRQsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Setup MAC addresses for routerboardsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-03[adm5120] RB153 must use the generic RB1xx's setup codejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-01CF driver cleanupflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-24[adm5120] minor cleanupsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-23[adm5120] fix flash driver, it should work on RB150 as welljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-23The RB513 CF driver is now a module, enable it by default for the RB1xx profile.florian
Fix the membase of the CF driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-22Add preliminary support for the Routerboard 153 CF slot (#2550)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-18[adm5120] add ids for Edimax BR-6104Wg boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-17[adm5120] switch driver cleanup, 4th phasejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-11[adm5120] coding style fixesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-11[adm5120] switch to 2.6.23juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-04[adm5120] NAND driver cleanups, thanks to Alexandros C. Couloumbis for testingjuhosg
* use generic NAND driver from now * add experimental support for RouterBOARD 150 NAND device git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-01[adm5120] prepare trxsplit to support sysupgradejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9085 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 19:13:03 +0000