Age | Commit message (Collapse) | Author |
|
(#8033)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27930 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
This is always used to build a firmware for linux systems also if we are on freebsd.
This is one patch from #9897
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27926 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
closes #9773
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27924 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27905 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
* remove suport for 2.4 kernel
* add support for bcma bus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
remove BKL and adds support for changes in bcm47xx code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27903 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27902 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27891 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27890 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
retries in retry counting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27889 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
to fewer latency spikes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27888 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27874 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27870 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27868 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Until we properly deal with the various versions of libelf we package,
mark perf as broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27867 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27864 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27863 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27862 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
stations - should fix some latency issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27861 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27860 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Also prevent gdb from trying to link against the host's libexpat.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27859 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
mbcache is only needed if xattr support is enabled, but this is only true
for ext4 on 2.6.37+, so just bundle it with ext4 when needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27849 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
- split port argument at the rightmost colon, allows binding to specific IPv6 addresses
- don't use uci ipaddr var but resolve ifname and get addresses from it (#9853)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27843 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27832 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27830 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27827 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27823 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
eapol frame
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27822 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
swconfig fails to load uci configuration after the generic switch
identifier changes.
root@OpenWrt:/# uci show network | grep switch
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0t 2 3 4 5
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=eth0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=0t 1
root@OpenWrt:/# swconfig dev eth0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
root@OpenWrt:/# swconfig dev switch0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27820 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27819 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27818 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
nor STOP is defined
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27797 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
icmp types are given in a rule block for both icmp and other protocols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27792 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
and also fix tx power limits with ATH_USER_REGD set
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27788 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27783 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27779 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
deleted init scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27776 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27769 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
and it was reported to cause connection stability issues (see #9646)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27764 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27757 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27753 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27752 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
BCMA bus
- refresh and reorder patches
- introduce a unified BCMA/SSB glue driver to accomodate for both bus types on brcm47xx
- extend wlunbind init script to detach device from bcma-pci-bridge as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27751 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27750 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27735 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
This makes b43 work on broadcom SoCs using bcma as system bus.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27734 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27732 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
If a user invoked /sbin/ifup to bring up an interface, the setup used to fail
in case of wireless networks tied to a non-bridged interface definition.
Likewise, the bringup of "lan" in the default configuration will reinitialize
the bridge but do not re-join the wireless network to it, requiring an extra
call to /sbin/wifi (which might not be possible anymore due to a severed link
if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27720 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27711 3c298f89-4303-0410-b956-a3cf2f4a3e73
|