summaryrefslogtreecommitdiff
path: root/package/switch/src
AgeCommit message (Collapse)Author
2013-02-14switch: export name of device found via /prochauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-14switch: export cpuport, ports and vlans via /prochauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: add support for BCM53125hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: resetting and enabling vlan write for gigabit switcheshauke
This patch makes it possible to reset and enable writing vlans to recent switchs. This is based on a patch by jcharest and the Broadcom SDK. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: read and write vlan config from and to gigabit switcheshauke
This patch makes it possible to read and write the vlan config from and to recent switchs. This is based on a patch by jcharest and the Broadcom SDK. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: improve robo_switch_enable()hauke
This is based on a patch by jcharest and the Broadcom SDK. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: fix switches with more than 6 portshauke
This is based on a patch by jcharest and the Broadcom SDK. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: reverse if else in handle_vlan_port_read()hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: the BCM5365 is a special switch and the BCM5350 or BCM5325 is the ↵hauke
normal case. This makes it easier to compare this code with the code from the Broadcom SDK. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: reset switch before using it.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: improve error handling in robo_probe()hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13switch: run cleanfile over the source codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03switch: ROBO Switch Gigabit MII Supporthauke
I wrote this patch some time ago because I had a need for one of the Gigabit ports (Linksys E3000) to be forced to 100FD. This is based on the robocfg sources included w/ the RT-N16 sources from ASUS. Since work is progressing on a BGMAC driver that could be included in OpenWRT, this may be useful to someone else. In testing, forcing the speed to 10/100 or 1000 worked fine; however, when trying to force full-duplex mode, the result was always half-duplex. I was not able to isolate the source of the problem (this patch, driver or H/W limitation). The only way I could get it to work was to set the port to Auto, but then only advertise 100FD (not included in this patch). I have a modified version of the robocfg package as well, I'd have to clean it up a little first (remove the full-duplex hack) before submitting it if there is interest. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03switch: improve error messageshauke
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03brcm47xx: add a new version of the nvram rewrite patchhauke
This is the version like it was send for mainline inclusion. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22[packages] switch: warn if ndo_do_ioctl is not implemented in the Ethernet ↵hauke
driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[package]: switch: improve error messagehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05[packages] switch: clean up robo switch driverhauke
* remove use_et, all supported drivers are using mii ioctls * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR. * remove support for old kernel versions * do_ioctl is allways called with buff == NULL * use if_mii git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04brcm47xx: use libgpio instaed of implementing the gpio interface ourself.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28switch: fix some memory leaks in switch_parse_vlan()hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04switch: update for brcm47xx targethauke
* remove suport for 2.4 kernel * add support for bcma bus git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20[package] switch: fix switch-robo device reference countingflorian
Fix incorrect device reference counting by switch-robo. Signed-off-by: George Kashperko <george@znau.edu.ua> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-20[package] remove whitespaces in kmod-switch sourcesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26remove linux 2.4 support from several packagesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28[package] switch: do not include linux/autoconf.h (#6513)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03[package] fix breakage on wl500gp after r18214, thanks sn9 (#6084)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29make etehrent work on wrt350n, thx sn9blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-26[brcm47xx] add patches for kernel 2.6.31hauke
This is completly untested. Only a compile tests with the default config was done! git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-05[package] fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson ↵florian
(#5053) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-02[package] prevent kmod-switch from accessing nvram on brcm63xx (#5035)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-21[package] fix nvram_get checking on non-WGT634U (#4975)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20[package] fix strange LED behavior with Netgear WGT634U (#3552)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09[package] allow kmod-switch to be used on brcm63xx (#4599)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-02switch: remove message about BFL_ENETADM not being set on systems with a ↵nbd
roboswitch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registerednbd
This patch prevents switch-robo.c from attempting robo_probe on a port that is already registered. robo_probe will adjust kernel reference counts if it detects a switch on the port. If this patch wasn't applied, the wrt350n would hang on reboot, waiting for the network driver reference count to reach zero indefinitely. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20[bcm47xx] Stopgap compilation fixes for diag and switch under 2.6.25noz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-14Allow package/switch to compile against 2.6.25noz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-13Check the return values of kmalloc()mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-01fix switch-robo.c compile errors on linux 2.4nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-27Fix the roboswitch code for the WRT350Nmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19ssb: Make the GPIO API reentrancy safe.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16fix adm switch misdetection, which led to bogus button events that caused ↵nbd
the system to shut down git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14fix kmod-switch compile on brcm-2.4 (#1461)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke ↵nbd
the old brcm-2.6 port, close #1312, #1451 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14add diag and switch support for brcm47xx-2.6nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-07fix memory leak in switch drivers (patch from #1132)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-27Fix the counters bug (#983)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-14prepare packages for kernel upgrade to 2.6.19nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-11Add Trendware TEW-411BRplus (#1038)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5764 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 16:17:20 +0000