summaryrefslogtreecommitdiff
path: root/package/switch/Makefile
AgeCommit message (Collapse)Author
2013-01-23bcm63xx: switch to b53 and swconfigjogo
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03switch: ROBO Switch Gigabit MII Supporthauke
I wrote this patch some time ago because I had a need for one of the Gigabit ports (Linksys E3000) to be forced to 100FD. This is based on the robocfg sources included w/ the RT-N16 sources from ASUS. Since work is progressing on a BGMAC driver that could be included in OpenWRT, this may be useful to someone else. In testing, forcing the speed to 10/100 or 1000 worked fine; however, when trying to force full-duplex mode, the result was always half-duplex. I was not able to isolate the source of the problem (this patch, driver or H/W limitation). The only way I could get it to work was to set the port to Auto, but then only advertise 100FD (not included in this patch). I have a modified version of the robocfg package as well, I'd have to clean it up a little first (remove the full-duplex hack) before submitting it if there is interest. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13[package] switch: the hardware must be up while configuringjow
Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04switch: update for brcm47xx targethauke
* remove suport for 2.4 kernel * add support for bcma bus git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20[package] switch: fix switch-robo device reference countingflorian
Fix incorrect device reference counting by switch-robo. Signed-off-by: George Kashperko <george@znau.edu.ua> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950claudio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26remove linux 2.4 support from several packagesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05[package] switch: explicitely clear port mappings in unsused vlans (#7082)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20[package] fix strange LED behavior with Netgear WGT634U (#3552)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09[package] allow kmod-switch to be used on brcm63xx (#4599)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06export switch-core.h to $(STAGING_DIR)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08major target cleanup. it is now possible to have subtargets that can ↵nbd
override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07fix board name for nvram and switch packages on brcm-2.4 after [8653]nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07move package description to a separate definition, remove it when ↵nico
DESCRIPTION=TITLE git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06strip the kernel version suffix from target directories, except for brcm-2.4 ↵nbd
(the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-03package Makefile cleanup: remove uneeded varsnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02use a default VERSION field for kmod packagesnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14fix kmod-switch compile on brcm-2.4 (#1461)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14add diag and switch support for brcm47xx-2.6nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-20cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod ↵nbd
packages to KernelPackage interface git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23replace lots of manual install commands with INSTALL_* variablesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-12implement target profiles in menuconfignbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-09-23standardize Makefilenico
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-04set PATH in rules.mkmbm
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-07-30rewrite of the network scripts and configurationnbd
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-27credit where credit is duembm
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21add INCLUDE_DIR variable for $(TOPDIR)/includenbd
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21build system cleanup. move shared include files into $(TOPDIR)/include, move ↵nbd
lzma, mkfs.* into toolchain/ git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-18normalize Makefiles.nico
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-05-31move target/linux/package/switch to package/, fix a bug in the ipkg ↵nbd
dependency handling git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3864 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 10:59:45 +0000