summaryrefslogtreecommitdiff
path: root/package/swconfig
AgeCommit message (Collapse)Author
2012-02-12swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ (fixes #9765)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-03swconfig: fix vlan/port configs being applied to all switchesjogo
Check devn instead of dev (which will never be null at this point). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-30swconfig: hide inactive vlans on "swconfig dev switch0 show"nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-28swconfig: fix backward compatibilityjuhosg
swconfig fails to load uci configuration after the generic switch identifier changes. root@OpenWrt:/# uci show network | grep switch network.@switch[0]=switch network.@switch[0].name=eth0 network.@switch[0].reset=1 network.@switch[0].enable_vlan=1 network.@switch_vlan[0]=switch_vlan network.@switch_vlan[0].device=eth0 network.@switch_vlan[0].vlan=1 network.@switch_vlan[0].ports=0t 2 3 4 5 network.@switch_vlan[1]=switch_vlan network.@switch_vlan[1].device=eth0 network.@switch_vlan[1].vlan=2 network.@switch_vlan[1].ports=0t 1 root@OpenWrt:/# swconfig dev eth0 load /etc/config/network Failed to apply configuration for switch 'switch0' root@OpenWrt:/# swconfig dev switch0 load /etc/config/network Failed to apply configuration for switch 'switch0' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-27swconfig: Add generic switch identifiersjogo
Also make switches available under a generic name "switch<num>" for device name agnostic access. The old device name is used as an alias for backward compatibility. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03swconfig: make reset and enable_vlan default to 1 (based on patch by Nikolay ↵nbd
Martynov) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03swconfig: avoid setting "NOVAL" attributes if "0" was provided as a valuenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13swconfig: add -lnl-genl (patch by Philip Prindeville) - purely cosmetic, ↵nbd
swconfig uses libnl-tiny anyway git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-08package/swconfig: add sanity checks to prevent a segfaultjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26remove obsolete kernel dependencies and version checksnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-16bump a bunch of packages updated after 10.03nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-30[package] swconfig: mask on brcm47xxjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16swconfig: Add cpu port index to help output.juhosg
Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16swconfig: Fix switch name.juhosg
This patch fixes a small typo in swconfig's client side that caused it to print the interface name instead of the switch's device name on the help page. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12[package] fix swconfig build failure on brcm63xxflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19swconfig: Remove unused codenbd
Signed-off-by: Martin Mares <mj@ucw.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-15swconfig: add copyright for Martin Maresnbd
Signed-off-by: Martin Mares <mj@ucw.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-15swconfig: use print_attr_val() in CMD_GETnbd
Use the print_attr_val() function introduced by the previous patch to simplify the get command. Signed-off-by: Martin Mares <mj@ucw.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-15swconfig: add show commandnbd
Add a "show" command, which displays all attributes of the selected port, VLAN, or of the whole switch. Signed-off-by: Martin Mares <mj@ucw.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-15swconfig: clean up command line parsingnbd
The command line parser was unsystematic and it silently ignored many illegal combinations of options. Try to clean that up. Signed-off-by: Martin Mares <mj@ucw.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20swconfig: show tagged port flagjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18swconfig: support providing the switch device name in an option instead of ↵nbd
the section name - necessary to support switches that contain characters such as "-" git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-26add _GNU_SOURCE to CPPFLAGS required to include <bits/socket.h> on recent ↵nico
eglibc revisions git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16[package] swconfig: clear ip address on the switch interface, this prevents ↵jow
duplicate assignments of 192.168.1.1 on the DIR-300 at least git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-10[package] bump some revisions and update copyrightsagb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-24move /bin/swconfig to /sbinnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-01swconfig: fix kernel version dependencynbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30swconfig: use libnl-tiny instead of libnlnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-21automatically configure switches when swconfig is installednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-21swconfig: implement uci loading supportnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20swconfig: fix up kernel dependenciesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-24[package] replace some -I & -L flags with $(TARGET_CPPFLAGS) & ↵nico
$(TARGET_LDFLAGS) when appropriate git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18add new switch configuration apinbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13009 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 17:37:59 +0000