summaryrefslogtreecommitdiff
path: root/package/kernel
AgeCommit message (Collapse)Author
2013-09-05mac80211: do not download carl9170 firmware separately, but use the one from ↵hauke
linux-firemware linux-firemware contains the same version we loaded without this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-fs-xfs: fix dependencieshauke
This fixes the following error: xfs: Unknown symbol exportfs_decode_fh (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: kmod-usb-serial-keyspan: fix dependencieshauke
This fixes the following error: keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05ath10k: enable Atheros 802.11ac driverhauke
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware is supported. The ath10k firmware is currently only available through github so use that as its source for now. This goes build tested, not run time tested. [Hauke: I did some minor changes] Cc: ath10k@lists.infradead.org Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: Mathieu Olivari <mathieu@qca.qualcomm.com> Cc: Jerome Proffit <jproffit@qca.qualcomm.com> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Matthew McClintock <mmcclint@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/rotary-gpio-custom: fix checkpatch errors module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/w1-gpio-custom: fix checkpatch errors in module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/i2c-gpio-custom: fix checkpatch errors in module sourcejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02package/kernel: add spi-gpio-custom modulejuhosg
The package makes it possible to create custom SPI buses via GPIO lines. This module is based on i2c-gpio-custom and allows to configure an SPI bus via GPIO lines and expose it to userspace without rebuilding the kernel. This is maily intended to connect microcontrollers and other simple SPI devices without making an ad-hoc kernel driver. Signed-off-by: Marco Burato <zmaster.adsl@gmail.com> [juhosg: - change subject, - extend and reformat commit message, - cleanup checkpatch errors/warnings in module source] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-01netfilter: Add IPv6-NAT support for kernel and iptcyrus
Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27mac80211: add a bunch of rt2x00 specific changesjuhosg
Backport some rt2x00 specific changes from wireless-testing/master-2013-08-26 to add support for RT3573 based devices. Also refresh the rt2x00 specific patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-26mac80211: merge a few ad-hoc mode fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-26mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issuesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-21[kernel] crypto: add missing depends for crypto-managerluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17broadcom-diag: remove BUFFALO_UNKNOWNhauke
This was itriggered by to many non buffalo devices This closes #14043. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17broadcom-wl: Add 'N' mode support to broadcom-wlhauke
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15mac80211: merge upstream change to fix mesh rssi thresholdsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-13ath9k: merge a few more cleanups/fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-13ath9k: reorganize patchesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-13mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with ↵nbd
fixed-freq, fixed-bssid Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12kernel: remove imx-sdma-fw because of license issuesluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-11kernel: add imx-sdma-fw packageluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-10ath9k: fix an rx descriptor processing race conditionnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06mac80211: Handle concurrent AP/STA beaconing properlynbd
Use the "start_disabled" option in hostapd that was added in the earlier patch. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as ↵nbd
upstream submission) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06mac80211: refresh a patch that was using the wrong patch stylenbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06ath9k: add some more fixes for the tx queueing reworknbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: rtlwifi depends on PCI or USB support in the Kconfig filehauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05kernel: fix DMA error when BCM4331 is connected to BCM4706hauke
The BCM4331 supports a PCIe max request size of 512 bytes and uses that, but the PCIe controller in the BCM4706 just supports 128 Bytes and that causes a DMA error for packages bigger than 126 bytes. This fixes the problem by setting the BCM4331 also to 128 Bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05gpio-button-hotplug: debounce the initial button state, the first reads at ↵nbd
boot time might be wrong Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: fix rt2x00 dependencyjuhosg
The current dependency prevents building of the rt2800{pci,usb} drivers for RT3883. Change the dependency to fix this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: rt2x00: fix LED polarity patchjuhosg
The patch causes compiler warning ... <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom': <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] ... and runtime errors on PCI/USB devices: [ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected [ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001 [ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform [ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte [ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected [ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47 [ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 [ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05mac80211: enable RT{33,35,53,55}XX chip support in rt2800usbjuhosg
Closes #13951. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04mac80211: add rtlwifi driversjogo
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com> [jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing usb dependencies, backport upstream fixes for Kconfig issues] Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04brcm47xx: change board detection for some Asus deviceshauke
This closes #13316 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04kernel: kmod-appletalk: fix dependencieshauke
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are getting build as a module. kmod-appletalk depends on llc.ko and psnap.ko, but at least psnap.ko,was not packed. On most systems CONFIG_LLC will be build into the kernel so this problem does not show up. This fixes the missing dependency of kmod-appletalk on psnap.ko Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: show error message in case something goes wrong with gpio irqhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: add gpio config for Asus RT-N66Uhauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03broadcom-diag: add gpio config for Linksys E4200v1hauke
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03gpio-button-hotplug: cleanup, fix compiler warningnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03gpio-button-hotplug: fix active_low handling, possibly broken in r37643nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is sethauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: add missing module to video-core for kernel < 3.6hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02kernel: fix usb-chipidea compilation with kernel <= 3.9hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02broadcom-diag: add support for the ASUS RT-N12hauke
This adds button and led info, which I determined by manually poking the gpio values. Signed-off-by: Josh Stone <cuviper@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02broadcom-diag: increase version numberhauke
There are some changes in there and this should be rebuild. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02mac80211: backport a few upstream fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01kernel: load libphy before tg3hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01brcm47xx: improve detection of Linksys WRTSL54GShauke
This closes #13319 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.blogic
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be used to swtich between 3 positions. At leat 1 button is in pressed state in any of those positions. Initialize 'last_state' as 0 (released) will cause the device to automatically enter failsafe mode on every bootup. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37643 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 09:41:36 +0000