summaryrefslogtreecommitdiff
path: root/package/broadcom-diag/src
AgeCommit message (Collapse)Author
2013-06-21packages: clean up the package folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28broadcom-diag: support for the WNDR3700v3hauke
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: add support for e3200 v1hauke
Hex values in nvram seem to be uppercase on my e3200 device. Define one power led and two buttons (reset/wps). Signed-off-by: Tijs Van Buggenhout <tvb@able.be> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: Detection of WNDR3400v1hauke
nvram variable "boardtype" is unique for now. -button gpio were taken from nvram. -led information was taken from dd-wrt ( http://svn.dd-wrt.com/browser/src/router/libutils/utils.c ) I hope that I changed the values correctly. Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24broadcom-diag: use new in kernel board detection codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03broadcom-diag: add diag support for Linksys E1000 V1hauke
This adds diag leds/buttons support for Linksys E1000 V1. It worked on my router, however it may need some tweaking by people more familiar with openwrt and c to make it fit for commiting. Thank you hhm for this patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26[targets] get rid of the IRQF_SAMPLE_RANDOM flagflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04brcm47xx: use libgpio instaed of implementing the gpio interface ourself.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-28broadcom-diag: add missing break into switch case statement.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-17[package] broadcom-diag: add missing brackets breakign the detection logic ↵jow
(#10836) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13broadcom-diag: add support for some new deviceshauke
There is still no Ethernet driver for these devices in trunk. Thanks George Kashperko for the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04broadcom-diag: add support for bcmahauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04brcm47xx: update patcheshauke
* this adds sflash support for ssb devices * the flash is now a platform device * minor updates git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28brcm47xx: add initial support for devices with bcma bus.hauke
Ethernet and wifi are not working and this is highly experimental. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-08brcm47xx: add Netgear WNR834BV1hauke
Thank you realopty for the patch. This closes #7702 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05Toto, we don't support Linux 2.4 anymore..kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-13[package] broadcom-diag: SimpleShare: expose power button as reset to the ↵jow
system, remove actual reset button - it's hardwired and will reset the SoC (#7928) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-31package/broadcom-diag: use broadcast_ueventjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06brcm47xx: fix warning introduced in r22516.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2hauke
Thank you realopty for the patch. tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/ This closes #7702. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-10broadcom-diag: detect more variants of SimpleTech SimpleSharenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01fix GPIO pin for G3GV2-VFmarkus
Signed-off-by: Niclas Koeser <nks@informatik.uni-kiel.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26remove linux 2.4 support from several packagesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15package/broadcom-diag: fix USB led polarity on Asus WL-HDD (closes: #7055)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-07added WRT54G3GV2-VF detection to broadcom-diagmarkus
+ diag now recognizes the router + basic LEDs work - 3G LED for blink does not work as for the old version so I removed it. Maybe some GPIO probing might help. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28[diag] add missing hunks to recognize the Microsoft MN-700 device (#6749)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-21[brcm-2.4] add support for OvisLink WL-1600GLjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02[package] add western digital netcenter support to broadcom-diag (#6124)florian
original patch from Christoph Muellner git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-24add Askey RT210W support (patch from #6380)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-24add WRT300N v1.1 support (patch from #6379)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-28Added identification of WRT610N and its button/led definitions.nbd
Signed-off-by: Tomas Kopal <Tomas.Kopal@altap.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27[brcm-2.4] add support for the WRT160N, patch from Westley Paynterflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14D-Link DIR-320 support (broadcom-diag)hauke
This patch adds D-Link DIR-320 support to broadcom-diag. "reserved" button is the button on the right side of the router without any title. I'm not sure if I've selected right name. Signed-off-by: Leonid Evdokimov <leon@darkk.net.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-13[package] recognize WAP54Gv2 and assigne LED and GPIOs (#5335)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-07[package] fix detection of motorola wr850g, thanks to Vinicius Fonseca, (#4710)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17get rid of $Id$ - it has never helped us and it has broken too many patches ;)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22Asus WL-330gE Supportnbd
Here is support for the compact Asus WL-330gE. It uses that all-in-one 5354 Broadcom chip that's also in the WL-520gU, so I assume USB support can be soldered on. I've yet to open up the device, though. Initial flashing is done through the CFE failsafe mode like on other Asus devices, where you boot holding the reset button, the power LED flashes, and you tftp an image. Signed-off-by: David Cooper <dave@kupesoft.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22fix broadcom-diag on linux 2.6.28 (#4633)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-06add initial 2.6.28 support for brcm47xx targetnbd
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-04Add proper LED support to broadcom-diag for the Asus WL-320gE/gP routers (#4062)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-31broadcom-diag: reset the interrupt mask of configured leds to avoid spurious ↵nbd
interrupts git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26[brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network ↵juhosg
configuration (closes #2788) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-07Add support for WRT600N and WRT600N v1.1 (#3535)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15(1/6) bcm57xx: init from diagnbd
I've been working to finish up the bcm57xx module package nbd posted a few months ago. I am no expert, just had some spare time and some motivation. Here is the background: https://dev.openwrt.org/ticket/2744 This first patch disables the bcm57xx gpio setup in broadcom-diag. The switch needs to be initialized by the driver so the driver can then reset the switch ASAP. If the switch isn't reset quickly enough, it will forward packets between the WAN and LAN, which will cause problems with modems that only allow one mac to access the internet. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-31Add Siemens SE505v2 detection to diag (#3416)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20[bcm47xx] Stopgap compilation fixes for diag and switch under 2.6.25noz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-16Add support for Asus wl-520gcflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-12Fix typo in broadcom-diag LED output enablenoz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11125 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-28 03:41:37 +0000