summaryrefslogtreecommitdiff
path: root/package/base-files
AgeCommit message (Collapse)Author
2011-07-15[package] base-files: use uci_toggle_state() to prevent unwanted aggregation ↵jow
of state vars (#9711) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07[package] base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. ↵cshore
This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03[package] base-files: pass conloglevel to syslogd (#9463, #9647)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02base-files: do not use the relinked libgcc, fixes c++ exception handling ↵nbd
issues (#9185) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-23[toolchain] add gfortran compiler support (#9600, patch from Xiangfu Liu via ↵jow
Qi hardware) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09[package] base-files: assume a default ipv6 prefix size of /64, thats what ↵jow
the majority of users mean when they just specify an ip address git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09[package] base-files: if an ip6addr without a prefix is given, assume /128 - ↵jow
otherwise the busybox utilities will interpret it as /0 and create an invalid default route git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07[package] base-files: fix error reporting for unsupported protocols on ↵jow
virtual interfaces git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07base-files: do not write to /etc/config/wireless at boot time unless a new ↵nbd
interface was found eliminates unnecessary flash write cycles at every boot patch by Peter Wagner (tripolar) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24base-files: make the MAC address of bridge interfaces sticky to avoid ARP ↵nbd
issues on wifi re-configuration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24[package] base-files: mark /etc/crontabs/ as config directoryjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18[PATCH] ipcalc.sh CIDR notationjow
Hi, the attached patch makes ipcalc.sh accept IP/Netmask combinations in CIDR notation. Before you could only do: # sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 with this patch you can also execute it with: sh ipcalc.sh 192.168.0.0/24 1 10 IP=192.168.0.0 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 NETWORK=192.168.0.0 PREFIX=24 START=192.168.0.1 END=192.168.0.11 The patch is based on #1260 [1], i just changed one line to calculate the START end END ips right. I wonder why that never got included. If there is no reason not to do i would like to ask you to commit that patch, because its a functionality i (and probably others) miss quite often. Btw, i also fixed 4 useless tabs, that might look a bit strange in the patch. Regards, Manuel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08[package] base-files: retrigger usb coldplug after module loading, solves ↵jow
usb_modeswitch on boot and possibly others (#9352) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07base-files: fix a typo in etc/bannerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[package] base-files: cleanup permissions of device files in common hotplug ↵jow
rules (#9211) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-19[package] base-files: fix stale space in eglibc library install section (#9270)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12base-files: return success on lib-copying with external toolchainjow
when using an external toolchain the base-files package copies libc, libgcc and others from the library directory. The file list is given as following in the .config: CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}" Because the filenames are composed with different endings, not all files exist and will be skipped. Currently, this works only if the last composed file (util.so.*) really exists. At the moment this works - but only if you don't add a new file like 'uClibc'. Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this message, because the combination 'libuClibc.so.*' doesn't exist and Make will evaluate the last copy statement of the for loop. --- Message Snippet --- cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libnss_files.so.*': No such file or directory cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv-*.so': No such file or directory cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv.so.*': No such file or directory cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libuClibc.so.*': No such file or directory make[2]: *** [/home/user/Desktop/code/meetwise/openwrt/bin/at91/packages/libc_-68_at91.ipk] Error 1 make[2]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt/package/base-files' make[1]: *** [package/base-files/compile] Error 2 make[1]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt' make: *** [package/base-files/compile] Error 2 --- /Message Snippet/ --- To fix this unwanted behaviour I added an extra 'exit 0' to each for-loop and make ignores non-existing files as before. Signed-off-by: Sven Bachmann <dev@mcbachmann.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05[package] base-files: Use -h instead of deprecated -L for symlink checkacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05[package] base-files: fix minor problem in init.d/bootacinonyx
The script tests for the existance of /dev/root with test -e which fails if /dev/root is a dangling symlink making the call to ln fail. Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05[package] block-mount base-files: Added additional check to pi_include to ↵cshore
ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03base-files: bridge config, avoid having a random ipv6 ll addressnbd
So far, we are setting the bridge interface up before having added any bridge interface ports. This results in the bridge assigning a random mac address to its bridge interface and therefore IPv6 assigning a matching link local address to the bridge interface as soon as the bridge interface is up. After adding the first bridge port interface, the bridge's mac address is reset correctly, however the IPv6 link local address stays the same. This commit ensures that we are at least having the IPv6 link local address of the first interface added to the bridge instead of a random one. Signed-off-by: Linus Lüssing <linus.luessing@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-18[package] base-files: properly handle vlans on top of wireless interfacesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17base-files: overlayfs whiteouts depend on a specific xattr entry, which does ↵nbd
not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17base-files: add initial support for mounting overlayfsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17[package] base-files: update sysctl.conf for modern kernelsjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15[package] base-files: Autodetect newly added wireless hardwareacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-14base-files: link libpthread against libcnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13base-files: add a default /etc/services filesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13base-files: add users ftp (for ftp servers), network (network related ↵nbd
daemons such as tor, quagga, ...) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13base-files: add an ftp group as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13base-files: add a few default groups to /etc/group so that we can get rid of ↵nbd
a few postinst scripts git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-10base-files: make library relinking uclibc specific and fix libpthread ↵nbd
installation for the non-relinked variant git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-09base-files: only relink libraries if the linaro toolchain is selectednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-08gcc: move the optimized assembler helpers back into the static libgcc and ↵nbd
skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-08base-files: the relinked libpthread needs to be linked against libdl, ↵nbd
otherwise calls to dlopen() fail (fixes #8978) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-06base-files: fix Build/Compile override handling, fixes ar7 compilenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-03base-files: do not build or use libgcc on m68k and avr32nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-01base-files: relink uclibc and libgcc libraries to remove leftovers of the ↵nbd
statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-25[package] base-files: fix sysctl handling, do not react on fake ifaces in ↵jow
route hotplug handler git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20base-files: Add "-o noatime" to mount wrappermb
noatime is cheaper than default relatime. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20Fix whitespacemb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-18[package] base-files: Add /etc/nsswitch.conf to targets running ↵hcg
glibc/eglibc, otherwise name resolution fails git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-16base-files: librt should depend on libpthread, not the other way aroundnbd
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt depends on libpthread. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13it's time for some attitude adjustment ;)kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13remove the shared object stubs of libnsl and libresolv - let the compiler ↵nbd
use the static variants instead git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-13base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the ↵nbd
code there git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12[package] base-files: remove ptbtime3 rdate server, its deadjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12[package] base-files: update rdate server listjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25478 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 21:58:23 +0000