summaryrefslogtreecommitdiff
path: root/package/base-files/files
AgeCommit message (Collapse)Author
2012-11-25base-files: add support for the morse LED triggerjuhosg
Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] base-files: use a natural mount syntaxflorian
Busybox built against musl-libc will choke on these otherwise, besides that it is more natural to use the filesystem type, then options, then name, then mountpoint. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[package] base-files: skip LEDs handled by rssileds in led init-scriptflorian
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger. This doesn't harm as the kernel will refuse this setting, but it outputs some ugly log-lines: Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument ... In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08it's time to break the barrierskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24base-files: remove obsolete entries from sysctl.conf (#12236)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[package] base-files: release an attached loop device on umountingflorian
Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[package] base-files: make file compare silent in migrate-sysctljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[package] base-files: add uci-defaults script to migrate sysctl.conf (#12196)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13[package] base-files: remove route enabled check in lib/functions/network.sh ↵jow
after netifd bump git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13base-files: uci-defaults for rssiledsjuhosg
Adds capability to add uci-defaults defining RSSI LEDs Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12[package] base-files: provide a sysupgrade -r (--restore-backup) option as ↵jow
convenience wrapper for tar -C / -x(v)zf git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-09[package] base-files: fix option parsing of -F/--force parameterjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08[package] base-files: check for ldd presence and executability (#11991)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[package] base-files: fix detection of standalone lddflorian
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-14[package] base-files: Modernize hotplug2 rules (#11368)acinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03[package] base-files: ensure that /sys is available during sysupgrade, some ↵jow
essential services like om-watchdog need it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29[package] base-files: implement network_get_dnsserver() and ↵jow
network_get_dnssearch() in /lib/functions/network.sh git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29[package] base-files: only consider enabled default routes when finding the ↵jow
wan iface (#11774) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)nbd
A year of testing in the cerowrt project shows not using timestamps to be a very bad idea in nearly any TCP at speeds above a few Mbit. Lastly sack/dsack help on recovery from larger amounts of packet loss. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-26[package] base-files: allow wireless ifaces to be part of multiple networksjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-17[package] base-files: implement network_get_gateway(), ↵jow
network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13[package] base-files: enable shell tracing in initscripts when INIT_TRACE is setjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-07[package] base-files: implement network_defer_device() and ↵jow
network_ready_device() wrappers for upcoming netifd iface deferring support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] base-files: ship a static initial shadow db instead of creating it ↵jow
from passwd with sed, this fixes registering of users at compile time git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] base-files: make user_add() populate the shadow db as welljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] /etc/functions.sh => /lib/functions.shjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29base-files: add LED specific functions to /lib/functions/uci-defaultsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29[package] base-files: add network_is_up()jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29[package] base-files: let network_get_device() return the l3 interface, ↵jow
introduce network_get_physdev() to obtain the underlying iface (if applicable) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28[package] base-files: add network_get_device() to network.shjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28[package] base-files: introduce /lib/functions/network.shjow
This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23base-files: kill ubusd and udhcpc on sysupgrade as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgradenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23package/base-files: copy /lib/functions.sh to the ramfs on sysupgradejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06base-files: wait for wifi modules to settlejogo
On slower devices wifi drivers might take too long for detecting devices, resulting in the wifi detect call not seeing them. This was observed on a bcm6348 with bcm4318 wifi. Adding a one second pause was enough for b43 to expose the device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-27[package] base-files: fix typo in 05_firstboot_skip script (#11359)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21base-files: rename internal variables in config_foreach to make namespace ↵nbd
conflicts more unlikely git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20enable ntpd server for busyboxjow
hi Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file You can patch trunk and bacfire (tested both) You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router) I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> Le 27/03/2012 20:41, Etienne Champetier a écrit : > I've now tested my trunk patch and it works fine > But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???) > (I've made some grep and nothing) > > Le 23/03/2012 02:19, Philip Prindeville a écrit : >> Maybe: >> >> [ -n "$PROG" -a -x "$PROG" ] || return 1 >> >> instead? >> >> >> On 3/22/12 4:34 PM, Etienne Champetier wrote: >>> Hi >>> >>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default. >>> We only need 1 client/server daemon (olipro patch was launching 2 daemons) >>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!) >>> >>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> >>> >>> >>> Le 16/01/2012 01:57, Philip Prindeville a écrit : >>>> On 1/14/12 11:37 AM, Olipro wrote: >>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote: >>>>>> Don't we already have a 'disabled' option? Now we're adding an >>>>>> 'enable_server' option? >>>>>> >>>>>> That seems confusing for no useful reason. >>>>>> >>>>> have you bothered to read what I originally wrote? your response would make >>>>> me inclined to believe that you didn't. >>>>> >>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables >>>>> you to have one instance running as a client and another as a SERVER that >>>>> other hosts can synchronise with. >>>>> >>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the >>>>> built-in busybox ntpd to be utilised as a server? a separate init script >>>>> entirely perhaps? >>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'. >>>> >>>> -Philip >>>> >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-15[package] base-files: reformat banner to better work with varying version ↵jow
string lengths, do not set image options if menu is disabled (#11280) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12[buildroot] include, base-files, opkg: introduce version configuration to ↵jow
override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner The available placeholders are: %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt" %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt") %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment") %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment") %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262") %v .. Like %V, but all characters made lowercase and spaces substituted with "_" %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge" %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge") %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages" %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c") %T .. Replace with the current target (e.g. "ar71xx") %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le") git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20base-files: split service related functions off to /lib/functions/service.shnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-18Add munin to /etc/servicesjow
The muninlite postinst fails to add munin to /etc/services. This patch removes this broken postinst and add an entry for munin in /etc/services. This should have been done when the rest of the /etc/services postinsts were being removed (changesets 26142-26149). Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13base-files: remove old coldplugging hacks that are no longer necessary since ↵nbd
the new main hotplug2 instance calls udevtrigger as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04[package] base-files: enable conntrack accounting in sysctl. It used to be a ↵jow
compile time option which got deprecated git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02base-files: remove trailing whitespaces from lib/functions/boot.shjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02base-files: remove trailing whitespaces from lib/functions.shjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22[package] base-files: add a uci-defaults script which will migrate the root ↵jow
password to /etc/shadow if needed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22base-files: the initial hotplug2 instance sometimes misses a few relevant ↵nbd
events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19[package] base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so ↵jow
to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-08[package] base-files: implement a --force option for sysupgrade to override ↵jow
image checks, useful to upgrade old ar71xx installations to current trunk ones git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29688 3c298f89-4303-0410-b956-a3cf2f4a3e73