summaryrefslogtreecommitdiff
path: root/package/base-files/files/etc
AgeCommit message (Collapse)Author
2013-11-11[package] base-files: don't enter failsafe if triggered by switchluka
Fixes failsafe issues with switches after r38725. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11base-files: fix typo in rfkill scriptblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38742 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11base-files: update rfkill script to work with slider buttonsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11base-files: add a generic wps button handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07base-files: Make /etc/init.d/boot restartableblogic
Only reload hostname and timezone config on /etc/init.d/boot restart. Module loading and basic boot setup is only done during boot. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-17base-files: add a post start hook for procd managed servicesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25base-files: be verbose when entering failsafe due to a button being pressedblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-17[package] base-files/busybox: move ntpd init script from base-files to busyboxluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11procd: add a small script that handles config reloads until configd is readyblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11base-files: convert sysntpd init script to procdblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11base-files: run readlink on initscript name before opening servicesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11base-file: usbfs is no longer mounted under /proc/bus/usbblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08base-files: add 2 missing variable definesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: module loading is now handled by ubox/kmodloaderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: /etc/init.d/rcS is no longer needed, procd handles this for us nowblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: drop 2 pointless hotplug trigger stubsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11base-files: remove unnecessary early sysctl-hackcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11base-files: set default IPv6 forwarding value to 1cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10base-files: change PATH orderblogic
This allows packages to override busybox applets by placing the new binaries in /usr/{sbin,bin} Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06base-files: use less entropy when generating ULAscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25mount_root: prepare base-filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36429 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25boot: make use of kmodloader if it is availableblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22Change default IPv6 config to enable DHCPv6-PDcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09Adapt default network configuration for IPv6cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-26base-files: move sysctl init after bootjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25base-files: fix bad start index in previous commitjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25package/base-files: change sysctl handlingjow
Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13[base-files] make basefiles aware of procdblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-01base-files: Fix IPv6 early sysctls againcyrus
* Kernel IPv6 /proc interface inconsistency caused races git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-29base-files: Fix race-conditions with IPv6 sysctlscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28base-files: remove IPv6-forwarding setting for all interfacescyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: Set default value for IPv6 forwardingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18base-files: use numerically prefixed uci-defaults namesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17base-files: rename ULA generation scriptcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15base-files: add support for ipv6-prefixes in connection with netifdcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22base-files: add basic procd integration, let procd start (and restart) ubus ↵nbd
instead of having an ubus init script git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20[package] base-files: we don't need /etc/functions.sh symlink anymoreluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19merge /lib/functions/boot.sh and /lib/functions.shmirko
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19Do not overload mount-call - trying to reduce confusionmirko
The behaviour of calling 'mount' differed depending on whether it called the busybox-mount, the mount of util-linux, the mount defined in /lib/functions.sh and /lib/functions/boot.sh /etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh, both re-defining 'mount'. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29Remove default sysctl-entry for IPv6 here (races)cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25base-files: add support for the morse LED triggerjuhosg
Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[package] base-files: skip LEDs handled by rssileds in led init-scriptflorian
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger. This doesn't harm as the kernel will refuse this setting, but it outputs some ugly log-lines: Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument ... In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08it's time to break the barrierskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24base-files: remove obsolete entries from sysctl.conf (#12236)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[package] base-files: release an attached loop device on umountingflorian
Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[package] base-files: make file compare silent in migrate-sysctljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[package] base-files: add uci-defaults script to migrate sysctl.conf (#12196)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08[package] base-files: check for ldd presence and executability (#11991)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[package] base-files: fix detection of standalone lddflorian
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-14[package] base-files: Modernize hotplug2 rules (#11368)acinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32711 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 11:59:20 +0000