Age | Commit message (Collapse) | Author |
|
and server list in /etc/config/system
The rdate applet proved to be too unreliable to obtain the current time on boot:
- public time servers are rare and often unreachable or overloaded
- rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions
- the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations
- the time protocol as specified in RFC 868 is considered obsolete
This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly.
The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or
by clearing the timeserver list in /etc/config/system.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
transition to netifd easier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28495 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28306 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
stack performance on modern systems
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28126 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27965 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
nor STOP is defined
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27797 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
of state vars (#9711)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27616 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27501 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27400 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
interface was found
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
usb_modeswitch on boot and possibly others (#9352)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26841 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
rules (#9211)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26808 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26479 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26230 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26204 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26166 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26142 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
daemons such as tor, quagga, ...)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26138 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26136 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
a few postinst scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26133 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
route hotplug handler
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25713 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25514 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25479 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25478 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
- properly disable IPv6 on bridge ports
- introduce accept_ra option, defaults to true for dhcp interfaces, false for others
- introduce send_rs option, defaults to true for static interfaces, false for others
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25454 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25415 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
load events
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25383 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
fix like the earlier one for tun/tap interfaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25355 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25354 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25301 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25282 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
commands to new
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25268 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25172 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24647 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
may warp due to rdate, ntp and other means
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24212 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24206 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
- add sysupgrade support for keepfile hints
* introduces /lib/upgrade/keep.d/ for per-package keepfile lists
* introduces /etc/sysupgrade.conf for user defined keepfile hints
- prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg
- change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and
opkg list-changed-conffiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23258 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
block-extroot and
block-mount so that use of block-mount and block-extroot do not require that block-extroot,
block-mount, nor the kernel modules they depend, on are required to included in the image.
That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of
a squashfs system and it will work.
In addition packages which are installed into the jffs2 of a squashfs system may now affect
preinit, so long as they do not require execution of commands that occur before the merging of
the jffs2 and built-in (squashfs) preinit scripts is done.
Thanks jow for the preinit merge stuff!
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23110 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23087 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
This fixes a bug where lists end up with duplicate values if config_load was
invoked multiple times.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22629 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22508 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
per-route mtu values
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22003 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
firewall supports ip6tables now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21766 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
- add aliases to device by default (not ifname)
- introduce option "layer" to select the target ifname to attach the alias to:
- 3 use tun device (tun over bridge over device) fallback to bridge or device
- 2 use bridge (bridge over device) fallback to device
- 1 use device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21655 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
sections for non-static interfaces like ppp, dhcp, 6in4 etc.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21652 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
|
for tun or tap interfaces - this fixes support for uci managed OpenVPN interfaces and other externally created tuntap devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21641 3c298f89-4303-0410-b956-a3cf2f4a3e73
|