summaryrefslogtreecommitdiff
path: root/package/base-files/files/etc/init.d
AgeCommit message (Collapse)Author
2013-07-11procd: add a small script that handles config reloads until configd is readyblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11base-files: convert sysntpd init script to procdblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11base-file: usbfs is no longer mounted under /proc/bus/usbblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08base-files: add 2 missing variable definesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: module loading is now handled by ubox/kmodloaderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: /etc/init.d/rcS is no longer needed, procd handles this for us nowblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11base-files: remove unnecessary early sysctl-hackcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25mount_root: prepare base-filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36429 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25boot: make use of kmodloader if it is availableblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-26base-files: move sysctl init after bootjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25base-files: fix bad start index in previous commitjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25package/base-files: change sysctl handlingjow
Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13[base-files] make basefiles aware of procdblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-01base-files: Fix IPv6 early sysctls againcyrus
* Kernel IPv6 /proc interface inconsistency caused races git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-29base-files: Fix race-conditions with IPv6 sysctlscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19Do not overload mount-call - trying to reduce confusionmirko
The behaviour of calling 'mount' differed depending on whether it called the busybox-mount, the mount of util-linux, the mount defined in /lib/functions.sh and /lib/functions/boot.sh /etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh, both re-defining 'mount'. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25base-files: add support for the morse LED triggerjuhosg
Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[package] base-files: skip LEDs handled by rssileds in led init-scriptflorian
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger. This doesn't harm as the kernel will refuse this setting, but it outputs some ugly log-lines: Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument ... In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[package] base-files: release an attached loop device on umountingflorian
Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] /etc/functions.sh => /lib/functions.shjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06base-files: wait for wifi modules to settlejogo
On slower devices wifi drivers might take too long for detecting devices, resulting in the wifi detect call not seeing them. This was observed on a bcm6348 with bcm4318 wifi. Adding a one second pause was enough for b43 to expose the device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20enable ntpd server for busyboxjow
hi Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file You can patch trunk and bacfire (tested both) You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router) I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> Le 27/03/2012 20:41, Etienne Champetier a écrit : > I've now tested my trunk patch and it works fine > But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???) > (I've made some grep and nothing) > > Le 23/03/2012 02:19, Philip Prindeville a écrit : >> Maybe: >> >> [ -n "$PROG" -a -x "$PROG" ] || return 1 >> >> instead? >> >> >> On 3/22/12 4:34 PM, Etienne Champetier wrote: >>> Hi >>> >>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default. >>> We only need 1 client/server daemon (olipro patch was launching 2 daemons) >>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!) >>> >>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> >>> >>> >>> Le 16/01/2012 01:57, Philip Prindeville a écrit : >>>> On 1/14/12 11:37 AM, Olipro wrote: >>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote: >>>>>> Don't we already have a 'disabled' option? Now we're adding an >>>>>> 'enable_server' option? >>>>>> >>>>>> That seems confusing for no useful reason. >>>>>> >>>>> have you bothered to read what I originally wrote? your response would make >>>>> me inclined to believe that you didn't. >>>>> >>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables >>>>> you to have one instance running as a client and another as a SERVER that >>>>> other hosts can synchronise with. >>>>> >>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the >>>>> built-in busybox ntpd to be utilised as a server? a separate init script >>>>> entirely perhaps? >>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'. >>>> >>>> -Philip >>>> >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13base-files: remove old coldplugging hacks that are no longer necessary since ↵nbd
the new main hotplug2 instance calls udevtrigger as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22base-files: the initial hotplug2 instance sometimes misses a few relevant ↵nbd
events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19[package] base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so ↵jow
to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31package/base-files: add support for the switch LED triggerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31package/base-files: use case statement in led init scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17[package] base-files: now that we have date -k, adjust the kernel timezone ↵jow
after setting up TZ and localtime git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07package/base-files: use new service wrappernico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-03base-files: load modules early, run wifi detect afterwards and only then ↵nbd
process uci defaults this allows uci-defaults scripts to override wifi settings git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27[package] base-files: remove rdate integration, add busybox ntpd init script ↵jow
and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-20base-files: move network related scripts to a separate package to make the ↵nbd
transition to netifd easier git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[package] base-files: use "zonename" system option to symlink /etc/localtime ↵jow
via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03[package] base-files: pass conloglevel to syslogd (#9463, #9647)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07base-files: do not write to /etc/config/wireless at boot time unless a new ↵nbd
interface was found eliminates unnecessary flash write cycles at every boot patch by Peter Wagner (tripolar) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08[package] base-files: retrigger usb coldplug after module loading, solves ↵jow
usb_modeswitch on boot and possibly others (#9352) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05[package] base-files: Use -h instead of deprecated -L for symlink checkacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05[package] base-files: fix minor problem in init.d/bootacinonyx
The script tests for the existance of /dev/root with test -e which fails if /dev/root is a dangling symlink making the call to ln fail. Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15[package] base-files: Autodetect newly added wireless hardwareacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27[package] base-files: support port_state in led config (#6763)florian
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17base-files: add support for the usbdev LED triggerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-27[package] base-files: respect .auto option when running ↵jow
coldplug_interface_*() hooks on boot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-06[package] base-files: add a coldplug_interface_* hook to bring up ↵jow
non-hotpluggable interfaces on boot git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-03[package] base-files: Remove redundant stopping of watchdogacinonyx
busybox watchdog applet should stop the watchdog before shutting down git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-03[package] add stop() to watchdog init script, patch from Yury Polyanskiyflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16Fix bug in foregrounding in /etc/init.d/rcSflorian
Not using the config_xxx functions correctly. Amended. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13[package] option to allow boot to run to completion before starting shellflorian
Setting the system variable "foreground" to yes causes the system to run the init scripts in series and wait for completion. This is useful if (a) you don't want the user getting into the console until the system is initialized, or (b) you have things going on in your scripts that require strict ordering (and no possible race conditions). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03[package] base-files: also regenerate wifi config if existing config ↵jow
contains only whitespace git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15base-files: reload switch settings on /etc/init.d/network start as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26add the block-mount package by Daniel Dickinson (cshore), replacing existing ↵nbd
automount functionality git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19877 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 17:41:06 +0000