summaryrefslogtreecommitdiff
path: root/package/base-files/Makefile
AgeCommit message (Collapse)Author
2013-11-14base-files: add macaddr_canonicalize helper functionjuhosg
In commit r38690, the MAC address canonicalization has been converted to use 'tr' instead of 'printf'. This only works if with MAC addresses which uses the 'xx:xx:xx:xx:xx:xx' format. However on some boards, the MAC addresses are stored in different format in the mtd partition. Some vendors are using hyphens or dots as separators instead of colons. Also the leading zeroes may be missing from the individual octets or those are replaced with spaces. Add a new function which can be used to convert these into the 'xx:xx:xx:xx:xx:xx' format. Also update the 'mtd_get_mac_ascii' function to use the new helper. The helper function is based on this code: http://isquared.nl/blog/2010/08/11/Bash-function-to-canonicalize-MAC-addresses/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11[package] base-files: don't enter failsafe if triggered by switchluka
Fixes failsafe issues with switches after r38725. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08base-files: mtd_get_mac_ascii bugfixjuhosg
The mtd_get_mac_ascii utility function was broken. This fixes it. - Remove the superfluous include of /lib/functions.sh. The function is already in that file so it is pointless, - only use a variable if the whole key word matches, - don't try to process the MAC address if it is empty, - use 'tr' to canonicalize the MAC address, Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [juhosg: add more fixes, update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-31base-files: implement -l (--list-backup) sysupgrade parameter to list the ↵jow
files that would be backed up git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-31base-files: abort sysupgrade if file specified with --restore-config is not ↵jow
found git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-30base-files: implement -T (--test) sysupgrade parameter to verify image ↵jow
without actually flashing it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20base-files: add mtd_get_part_size helperjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-17[package] base-files/busybox: move ntpd init script from base-files to busyboxluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: procd is now the init processblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21base-files: procd init is now the default, remove files.oldblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11base-files: remove unnecessary early sysctl-hackcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11base-files: set default IPv6 forwarding value to 1cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06base-files: use less entropy when generating ULAscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06base-files: change network_find_wan() procedure to ignore default gateways ↵jow
in different routing tables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25package/base-files: change sysctl handlingjow
Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-23base-files: also apply r36107 to files.oldflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-22base-files: sysupgrade fail with eglibcflorian
With eglibc, "ldd busybox" give us libcrypt.so.1 => /lib/libcrypt.so.1 (0x774be000) libm.so.6 => /lib/libm.so.6 (0x773e4000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x773c0000) libc.so.6 => /lib/libc.so.6 (0x77276000) /lib/ld.so.1 (0x774fe000) Thus /lib/ld.so.1 is not printed by the libs fonction and isn't copied to the 'new' root before pivot root libs() { ldd $* | awk '{print $3}'; } https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/common.sh With uclibc the last line of "ldd busybox" is ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x77ada000) Don't know for musl! This patch replace https://dev.openwrt.org/changeset/19167, as glibc is gone The other way around is to rework libs() Please apply the fix (mine or another) on trunk and AA Might fix https://dev.openwrt.org/ticket/12273 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13[base-files] make basefiles aware of procdblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18base-files: introduce commonly used helper functions for setting ledsjuhosg
Currently, most platforms define such helpers in their own diag.sh implementation with almost identical code. By factoring out the common ground it's possible to simplify maintainability and homogenize the haptics over multiple platforms (so far as is reasonably practicable, in a next step). [juhosg: - fix led_set_attr parameters in led_timer - add led_morse and status_led_set_morse helpers - add status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16base-files: add macaddr_{add,2bin,setbit_la} helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16base-files: add mtd_get_mac_{ascii,binary} helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-01base-files: Fix IPv6 early sysctls againcyrus
* Kernel IPv6 /proc interface inconsistency caused races git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-29base-files: Fix race-conditions with IPv6 sysctlscyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28base-files: remove IPv6-forwarding setting for all interfacescyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: fix network_get_prefix6cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22base-files: Set default value for IPv6 forwardingcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17base-files: rename ULA generation scriptcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15base-files: add support for ipv6-prefixes in connection with netifdcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-11[package] base-files: Don't pass '--set-worker /lib/hotplug2/worker_fork.so' ↵acinonyx
to hotplug2 (#12781) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-27base-files: Fix a typo in config_list_foreachcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22base-files: add basic procd integration, let procd start (and restart) ubus ↵nbd
instead of having an ubus init script git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-17base-files: use json_is_a() in network.shjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16base-files: various enhancements to network.shjow
- support reading inactive gateways and DNS information in network_get_gateway(), network_get_dnsserver() and network_get_dnssearch() by passing "true" as optional last argument - internally cache fetched values to speed up subsequent accesses to the same data, introduce network_flush_cache() to clear them - add some inline function documentation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25base-files: add support for the morse LED triggerjuhosg
Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23[package] base-files: use a natural mount syntaxflorian
Busybox built against musl-libc will choke on these otherwise, besides that it is more natural to use the filesystem type, then options, then name, then mountpoint. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11[package] base-files: skip LEDs handled by rssileds in led init-scriptflorian
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger. This doesn't harm as the kernel will refuse this setting, but it outputs some ugly log-lines: Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument ... In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[package] base-files: release an attached loop device on umountingflorian
Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17[package] base-files: add uci-defaults script to migrate sysctl.conf (#12196)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12[package] base-files: provide a sysupgrade -r (--restore-backup) option as ↵jow
convenience wrapper for tar -C / -x(v)zf git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10[buildroot] move LIB_SUFFIX from base-files to rules.mkflorian
Some packages are going to need fixups based on LIB_SUFFIX git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-09[package] base-files: fix option parsing of -F/--force parameterjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08[package] base-files: check for ldd presence and executability (#11991)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27[package] base-files: fix detection of standalone lddflorian
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd. Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-26[package] base-files: allow wireless ifaces to be part of multiple networksjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-17[package] base-files: implement network_get_gateway(), ↵jow
network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13base-files: override Build/Compile/Default instead of Build/Compile (fixes ↵nbd
#11667) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-10base-files: move all toolchain packages to a separate package directory ↵nbd
'toolchain' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] base-files: add permission exceptions, do not clobber shadow ↵jow
permissions - based on patch by Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] base-files: ship a static initial shadow db instead of creating it ↵jow
from passwd with sed, this fixes registering of users at compile time git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[package] base-files: make user_add() populate the shadow db as welljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32063 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-24 18:21:52 +0000