summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-15brcm63xx: remove config-3.11florian
This was not supposed to be committed, remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: 96368MVWG supports USB gadget, enable itflorian
Enable the use of the USB gadget device at the board level so we can use bcm63xx_udc on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: replace gadget driver build fix with upstream submissionflorian
Also fixing a build warning due to a misplaced parenthesis in the previous submission. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14gpio-button-hotplug: add wwan buttonhauke
The wimax key will be used as a generic wwan key starting with Linux 3.13. The brcm47xx target uses this key for the 3g buttons. Also remove the ifdef around KEY_WPS_BUTTON, this is in the kernel for a long time now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14packages: kernel: reverse kernel dependencies logichauke
This will select the correct dependencies also for more recent kernel versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14hostapd: fix mcast_rate settingblogic
Introduced by ("netifd: add wireless configuration support and port mac80211 to the new framework") Reported-by: René van Weert <r.vanweert@sowifi.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14[modules] ipt-tproxy: nf_tproxy_core was moved out of 3.12, adding a check ↵wigyori
for kernel version Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: add support for the BCM96318REF_P300 boardflorian
Very similar to the BCM96318REF board except for the name and the SDRAM/DDR configuration which is totally transparent for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14busybox: enable the devmem appletflorian
The devmem applet allows poking at HW registers and as such is a valuable tool to have to avoid recompiling kernels or resorting to external HW adapters to modify HW behavior. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: enable 6318 supportflorian
BCM6318 support is usable enough to be enabled by default, turn it on. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: add basic support for the BCM96318REF boardflorian
Add basic support for the BCM96318REF board which is comprised of: - HS-SPI flash support - Ethernet switch support - USB slave device support Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: improve BCM6318 supportflorian
Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: package the USB gadget module (bcm63xx_udc)florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: target supports USB gadget devicesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: fix USB gadget build failure after 6345 Ethernetflorian
While adding support for BCM6345 Ethernet, some changes in the macros ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget driver fail to build. Fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: allow HSSPI registration on 6318florian
A missing condition check in dev-hsspi.c prevented the controller from being registered on 6318 where it is fully functional. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14brcm63xx: fix build failure on varidflorian
varid might both unused and unitialized when building for e.g: bcm6318, fix these two warnings turned into errors. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13sunxi: fix image generationwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13[modules]: fix 3.12 dependencieswigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix ohci frame number offsetjogo
BCM63XX's ohci controller does not need the frame number shift, but that was guarded with a PPC symbol. Fix this by making the no-fix generally available. This is a regression from the previous conversion to ohci platform driver. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix spi flash setup on (at least) some reference boardsjogo
CFE seems to leave the SPI flash mapping in an invalid state after loading the kernel on some reference boards, so fix it up on boot. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add initial support for BCM6318jogo
Add inital support for BCM6318, but keep it disabled for now until most things are supported. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add initial support for BCM63268jogo
Add initial support for the BCM63268 family of SoCs, but keep it disabled for now as most things don't work yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix the pcie window sizejogo
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big, not 16 MiB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: add support for chip variantsjogo
Some SoCs have variants which are mostly the same, but use a different chip id (or not). Add code for detecting them and handling them as their standard counterparts. This adds support for e.g. BCM6369. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: remove non runtime detect and refresh affinity patchesjogo
Remove the non runtime detect code since its effectiveness is dubious and almost never used. Also update affinity patches to work on top of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update bmips patches with upstream submissionjogo
Update bmips cleanup patches with upstream submission and backport a few bmips fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: spi flash on legacy spi controller needs the workaroundjogo
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs additional fixes for M25P80, so it remains broken for now. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: fix legacy spi tranfers >= 256 bytesjogo
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes are not affected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-13brcm63xx: update HSSPI driver with upstream submissionjogo
Update the HSSPI driver with the upstream submitted one that has a workaround for the auto cs down issue. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12sunxi: various changeswigyori
- rename hstimer DT on sun5i to avoid confusion - add Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12x86: remove unused code for kernel 3.7hauke
There are no generic patches for kernel 3.7 any more, remove this stuff. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12[packages] uboot-sunxi: - add support for Cubietruckwigyori
- cosmetic change: have the options listed alphabetically Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12remove empty directorieshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12targets: remove empty directorieshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: add brcmsmac + bgmac profilehauke
Signed-off-by: Cody P Schafer <devel@codyps.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12broadcom-diag: remove devices already supported by the kernelhauke
This driver will soon be removed completely and the scripts are already using the new API. This also removes bcm57xx_init() which restarts the switch and is now done by b53. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: parse model from cpuinfohauke
Instead of looking into the proc entry provided by broadcom-diag use the board info from /proc/cpuinfo to get the board we are on. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: fix led indicationhauke
Use the new led api also on brcm47xx. The led for failsafe indication is searched for. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: fix network failsafe indicationhauke
Remove the code used on the old switch driver. The Ethernet drive is loaded as a module and needs some time to get up therefor we added some wait function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: do not use broadcom-diaghauke
This makes brcm47xx target use the default gpio led and button driver and not broadcom-diag any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: add new led and button supporthauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: update some patches to versions in linux mainlinehauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm74xx: fix patch for BCM4706 CPUshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12brcm47xx: update mtd drivershauke
This backports some patches from linux upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: don't build mkhilinkfw untilt he ssl header dependency is resolvedblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12mpc85xx: preallocate SPI transfer bufferjuhosg
This helps to avoid high order alloction failures. Closes #14702. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ubox: welcome to 2014blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: fix eeprom loadingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ubox: update to latest git - fixes error reportingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39244 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 02:24:02 +0000