summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-04ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7juhosg
These models are based on the AP99 reference board, and uses the AR7241 SoC. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: show correct model name on TL-WA701N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add profile and build image for the TL-WA701N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-WA701N/NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: fix network configuration for the TL-WA901N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add default LED configuration for the TL-MR3020juhosg
Also use the system LED for diagnostic. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: add support for TP-Link TL-MR3020juhosg
This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-MR3020juhosg
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04package: remove the om2p-watchdog packagejuhosg
Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04ar71xx: use the new om-watchdog package for OM2Pjuhosg
Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04package: add om-watchdog packagejuhosg
om2p-watchdog package is OM2P specific. However a similar watchdog mechanism exists on OM1P as well. This new package wants to substitute om2p-watchdog with a new one which is suitable either for OM1P and OM2P. Signed-off-by: Antonio Quartulli <ordex@autistici.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04[toolchain] disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if ↵jow
BUILD_NLS is on (#10735) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04add CT target and TTL/HL match+targetjow
This patch adds the CT target for conntrack (enables manipulation of conntrack events and supercedes NOTRACK) as well as the TTL/HL target and match. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04[netfilter] remove current RTSP supportjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-03[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 ↵jow
to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01ar71xx: add profile and build factory image for the Hornet-UB boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01ar71xx: build images for the ALFA Network N2/N5 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01ar71xx: add support for the ALFA Network N2/N5 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01[package] iwinfo: factor txpower offset into info display output, recompile ↵jow
if driver selection changes git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01[toolchain] if CONFIG_BUILD_NLS is selected, compile uClibc with locale supportjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: enable SWCONFIG_LEDSjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31package/base-files: add support for the switch LED triggerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31package/base-files: use case statement in led init scriptjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31kernel: swconfig: introduce a generic switch LED triggerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: ag71xx: implement get_port_{link,stats} callbacksjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31kernel: swconfig: add get_port_{link,stats} callbacksjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31ar71xx: fix LEDs on the WRT400Njuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardjuhosg
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28ramips: rt288x: change base address and window size of flash bank 0juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28ramips: rt305x: add support for the ALFA Networks W502U (R36) boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27ar71xx: enable sysupgrade support for airrouterjuhosg
Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27ar71xx: fix sysupgrade on PB42/PB44 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-25[package] add usbreset - a small simple utility to send port rests to ↵jow
selected usb devices (#10394) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-25[generic] add missing config symboljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-25[netfilter] package CT targetjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23mac80211: clean up init, remove some redundant checks, fix tx power init ↵nbd
(#10113) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23brcm47xx: fix usb on more recent bcma based devices.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23ramips: initial support for Sitecom WL-351 v1 002juhosg
This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23ramips: add support for the Senao/EnGenius ESR-9753 boardjuhosg
Signed-off-by: Artur Wronowski <arteqw@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23ramips: define firmware partition for Omnima MiniEMBWiFijuhosg
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22kernel: enable magic sysrq by default, it does not add much to the kernel ↵nbd
image size, but is useful for debugging many kinds of hangs/crashes git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22ar71xx: set a reserved bit that resets to 1 when writing the address table ↵nbd
control register on the ar7240 switch (should fix #10547) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450Hjogo
Thanks netprince for reporting and testing. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach ↵jow
id of the WZR-HP-AG300H, correct the id (#10649) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-20[package] base-files: add -b (--create-backup) option to sysupgrade, which ↵jow
generates a backup .tar.gz according to the user settings. This will also be reused by LuCI. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-20[package] firewall:jow
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them - annotate default traffic rules with names - bump version git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19brcm47xx: remove patch starting adding brcm4716 to ssbhauke
brcm4716 is supported by bcma now we do not need this patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 23:34:13 +0000