summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-13[omap35xx]: Add new defconfig and profile for es varianthcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13[omap35xx] Squash uidshcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13[x86] Removed Alix.mk profile which was accidently left as an empty file ↵cshore
applying the patch during r26879 and r26880. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13Add missed files from previous commit: This patch provides an image suitable ↵cshore
for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13This patch provides an image suitable for the alix2*, alix3, and alix6 ↵cshore
headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add support for the T-Home Speedport W 303Vflorian
Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add firmware helpers for T-Home Speedport W 303Vflorian
Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Update support for the DSL-274xB revision Cflorian
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Accept any led with power in its name as power ledflorian
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Decouple Board ID and image name for fixupflorian
Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11[ep93xx] switch to 2.6.38florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11[kernel] add missing 2.6.38 touchscreen config symbolsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09[kernel/modules]blogic
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FCblogic
This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: populate LED3 on the JA76PF boardjuhosg
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: add uci config for the WLAN LED on the WRT160NLjuhosg
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: use phy0tpt trigger for the WLAN LEDsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: remove superfluous fifo_cfg overridesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08[PATCH] ipv6: restore correct ECN handling on TCP xmitthepeople
Thanks Dave Taht git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08Deployment of IPv6 has opened up many more prefixes than just thethepeople
2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: ag71xx: make switch register access atomicjuhosg
Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: ag71xx: fix section mismatch warningsjuhosg
The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08ar71xx: ag71xx: fix build error if debugfs is enabledjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08[package] base-files: retrigger usb coldplug after module loading, solves ↵jow
usb_modeswitch on boot and possibly others (#9352) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07brcm47xx: update patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07ar71xx: ag71xx: add debugfs entry for [rt]x_ringjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07ar71xx: ag71xx: add timestamps to ag71xx_bufjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07ar71xx: ag71xx: use dynamically allocated buffer for napi_statsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07ar71xx: ag71xx: use debugfs_remove_recursivejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07base-files: fix a typo in etc/bannerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07ar71xx: override wmac device name for the AR934x SoCsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-06[ar7] remove useless patchesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-06[kernel] fill maintainer infos for a couple of targetsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05[malta] update to 2.6.38.2florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05[kernel] add missing 2.6.38 symbolsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05brcm47xx: when detecting a ssb pci device without an own sprom write the ↵hauke
sprom data from the platform device to the correct pointer. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05brcm47xx: fix typo in patchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05linux/ar71xx: add some missing symbols for nand/yaffs targetsacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04[package] lua: remove posix from Lua core, almost nothing uses it - saves 9k ↵jow
compressed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04ath9k: add noise floor calibration fix that should improve stabilitynbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04linux/generic: port yaffs to 2.6.39acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04linux/rb532: use kernel and initramfs tags on image generationacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04[package] comgt: add tty hotplug remove handling, only iterate each tty once ↵jow
(#9211) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[package] kernel: revert r26814jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[PATCH 1/2] kernel: add kmod-crypto-ipsecjow
kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko). Signed-off-by: Lars Hjersted <lars@hjersted.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[PATCH 2/2] kernel: add kmod-crypto-{wq,rng,iv}jow
Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion. Signed-off-by: Lars Hjersted <lars@hjersted.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[PATCH 1/2] kernel: add kmod-crypto-{wq,rng,iv}jow
This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules. NOTE: The KCONFIG associated with each of these modules gets selected whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these modules are already being built. Signed-off-by: Lars Hjersted <lars@hjersted.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[PATCH] geos: remove unneeded modulesjow
The via-sata and gpio-nsc modules are both unneeded on the Geos platform. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[package] comgt: move ifup invocation back into background subshell to ↵jow
prevent hotplug deadlocks git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03[package] comgt: move 3g hotplug handling to tty subsystem, fixes race on ↵jow
coldplug (#9211) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26809 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 12:32:02 +0000